Suchergebnis: Katalogdaten im Herbstsemester 2019

Nummer	Titel	Typ	ECTS	Umfang	Dozierende
Energy Science and Technology Master
Master-Studium (Studienreglement 2018)
Kernfächer Mindestens je 2 Kernfächer pro Fachrichtung müssen erfolgreich abgelegt werden. Die Teilnahme am Kurs des "Fächerübergreifenden Energiewesens" ist für alle Studierenden obligatorisch.
Electrical Power Engineering
227-0122-00L	Introduction to Electric Power Transmission: System & Technology	W	6 KP	4G	C. Franck, G. Hug
Kurzbeschreibung	Introduction to theory and technology of electric power transmission systems.
Lernziel	At the end of this course, the student will be able to: describe the structure of electric power systems, name the most important components and describe what they are needed for, apply models for transformers and lines, explain the technology of overhead power lines, calculate stationary power flows, current and voltage transients and other basic parameters in simple power systems.
Inhalt	Structure of electric power systems, transformer and power line models, analysis of and power flow calculation in basic systems, symmetrical and unsymmetrical three-phase systems, transient current and voltage processes, technology and principle of electric power systems.
Skript	Lecture script in English, exercises and sample solutions.
227-1635-00L	Electric Circuits Students without a background in Electrical Engineering must take "Electric Circuits" before taking "Introduction to Electric Power Transmission: System & Technology"	W	4 KP	3G	M. Zima, D. Shchetinin
Kurzbeschreibung	Introduction to analysis methods and network theorems to describe operation of electric circuits. Theoretical foundations are essential for the analysis of the electric power transmission and distribution grids as well as many modern technological devices – consumer electronics, control systems, computers and communications.
Lernziel	At the end of this course, the student will be able to: understand variables in electric circuits, evaluate possible approaches and analyse simple electric circuits with RLC elements, apply circuit theorems to simple meshed circuits, analyze AC circuits in a steady state and understand the connection of the explained principles to the modelling of the 3-phase electric power systems.
Inhalt	Course will introduce electric circuits variables, circuit elements (resistive, inductive, capacitive), resistive circuits and theorems (Kirchhoffs’ laws, Norton and Thevenin equivalents), nodal and mesh analysis, superposition principle; it will continue by discussing the complete response circuits (RLC), sinusoidal analysis – ac steady state (complex power, reactive, active power) and conclude with the introduction to 3-phase analysis; Mathematical foundations of the circuit analysis, such as matrix operations and complex numbers will be briefly reviewed. This course is targeting students who have no prior background in electrical engineering.
Skript	lecture and exercises slides will be distributed after each lecture via moodle platform; additional materials to be accessed online (wileyplus)
Literatur	Richard C. Dorf, James A. Svoboda Introduction to Electric Circuits, 9th Edition Online materials: https://www.wileyplus.com/ Lecture slides and exercises slides
Voraussetzungen / Besonderes	This course is intended for students outside of D-ITET. No prior course in electrical engineering is required

Energy Flows and Processes
Nummer	Titel	Typ	ECTS	Umfang	Dozierende
151-0293-00L	Combustion and Reactive Processes in Energy and Materials Technology	W	4 KP	2V + 1U + 2A	K. Boulouchos, F. Ernst, N. Noiray, Y. Wright
Kurzbeschreibung	The students should become familiar with the fundamentals and with application examples of chemically reactive processes in energy conversion (combustion engines in particular) as well as the synthesis of new materials.
Lernziel	The students should become familiar with the fundamentals and with application examples of chemically reactive processes in energy conversion (combustion engines in particular) as well as the synthesis of new materials. The lecture is part of the focus "Energy, Flows & Processes" on the Bachelor level and is recommended as a basis for a future Master in the area of energy. It is also a facultative lecture on Master level in Energy Science and Technology and Process Engineering.
Inhalt	Reaction kinetics, fuel oxidation mechanisms, premixed and diffusion laminar flames, two-phase-flows, turbulence and turbulent combustion, pollutant formation, applications in combustion engines. Synthesis of materials in flame processes: particles, pigments and nanoparticles. Fundamentals of design and optimization of flame reactors, effect of reactant mixing on product characteristics. Tailoring of products made in flame spray pyrolysis.
Skript	No script available. Instead, material will be provided in lecture slides and the following text book (which can be downloaded for free) will be followed: J. Warnatz, U. Maas, R.W. Dibble, "Combustion:Physical and Chemical Fundamentals, Modeling and Simulation, Experiments, Pollutant Formation", Springer-Verlag, 1997. Teaching language, assignments and lecture slides in English
Literatur	J. Warnatz, U. Maas, R.W. Dibble, "Combustion:Physical and Chemical Fundamentals, Modeling and Simulation, Experiments, Pollutant Formation", Springer-Verlag, 1997. I. Glassman, Combustion, 3rd edition, Academic Press, 1996.
151-1633-00L	Energy Conversion This course is intended for students outside of D-MAVT.	W	4 KP	3G	I. Karlin, G. Sansavini
Kurzbeschreibung	This course provides the students with an introduction to thermodynamics and heat transfer. Students shall gain basic understanding of energy, energy interactions, and various mechanisms of heat transfer as well as their link to energy conversion technologies.
Lernziel	Thermodynamics is key to understanding and use of energy conversion processes in Nature and technology. Main objective of this course is to give a compact introduction into basics of Thermodynamics: Thermodynamic states and thermodynamic processes; Work and Heat; First and Second Laws of Thermodynamics. Students shall learn how to use energy balance equation in the analysis of power cycles and shall be able to evaluate efficiency of internal combustion engines, gas turbines and steam power plants. The course shall extensively use thermodynamic charts to building up students’ intuition about opportunities and restrictions to increase useful work output of energy conversion. Thermodynamic functions such as entropy, enthalpy and free enthalpy shall be used to understand chemical and phase equilibrium. The course also gives introduction to refrigeration cycles, combustion and psychrometry, as well as to basic principles of heat transfer. The course compactly covers the standard course of thermodynamics for engineers, with additional topics of a general physics interest (nonideal gas equation of state and Joule-Thomson effect) also included.
Inhalt	1. Thermodynamic systems, states and state variables 2. Properties of substances: Water, air and ideal gas 3. Energy conservation in closed and open systems: work, internal energy, heat and enthalpy 4. Second law of thermodynamics and entropy 5. Energy analysis of steam power cycles 6. Energy analysis of gas power cycles 7. Refrigeration and heat pump cycles 8. Nonideal gas equation of state and Joule-Thomson effect 9. Maximal work and exergy 10. Mixtures and psychrometry 11. Chemical reactions and combustion systems; chemical and phase equilibrium 12. Heat transfer
Skript	Lecture slides and supplementary documentation will be available online.
Literatur	Thermodynamics: An Engineering Approach, by Cengel, Y. A. and Boles, M. A., McGraw Hill
Voraussetzungen / Besonderes	This course is intended for students outside of D-MAVT. Students are assumed to have an adequate background in calculus, physics, and engineering mechanics.

Energy Economics and Policy
Nummer	Titel	Typ	ECTS	Umfang	Dozierende
363-0503-00L	Principles of Microeconomics GESS (Science in Perspective): This lecture is for MSc students only. BSc students register for 363-1109-00L Einführung in die Mikroökonomie.	W	3 KP	2G	M. Filippini
Kurzbeschreibung	The course introduces basic principles, problems and approaches of microeconomics. This provides the students with reflective and contextual knowledge on how societies use scarce resources to produce goods and services and ensure a (fair) distribution.
Lernziel	The learning objectives of the course are: (1) Students must be able to discuss basic principles, problems and approaches in microeconomics. (2) Students can analyse and explain simple economic principles in a market using supply and demand graphs. (3) Students can contrast different market structures and describe firm and consumer behaviour. (4) Students can identify market failures such as externalities related to market activities and illustrate how these affect the economy as a whole. (5) Students can also recognize behavioural failures within a market and discuss basic concepts related to behavioural economics. (6) Students can apply simple mathematical concepts on economic problems.
Inhalt	The resources on our planet are finite. The discipline of microeconomics therefore deals with the question of how society can use scarce resources to produce goods and services and ensure a (fair) distribution. In particular, microeconomics deals with the behaviour of consumers and firms in different market forms. Economic considerations and discussions are not part of classical engineering and science study programme. Thus, the goal of the lecture "Principles of Microeconomics" is to teach students how economic thinking and argumentation works. The course should help the students to look at the contents of their own studies from a different perspective and to be able to critically reflect on economic problems discussed in the society. Topics covered by the course are: - Supply and demand - Consumer demand: neoclassical and behavioural perspective - Cost of production: neoclassical and behavioural perspective - Welfare economics, deadweight losses - Governmental policies - Market failures, common resources and public goods - Public sector, tax system - Market forms (competitive, monopolistic, monopolistic competitive, oligopolistic) - International trade
Skript	Lecture notes, exercises and reference material can be downloaded from Moodle.
Literatur	N. Gregory Mankiw and Mark P. Taylor (2017), "Economics", 4th edition, South-Western Cengage Learning. The book can also be used for the course 'Principles of Macroeconomics' (Sturm) For students taking only the course 'Principles of Microeconomics' there is a shorter version of the same book: N. Gregory Mankiw and Mark P. Taylor (2017), "Microeconomics", 4th edition, South-Western Cengage Learning. Complementary: R. Pindyck and D. Rubinfeld (2018), "Microeconomics", 9th edition, Pearson Education.
Voraussetzungen / Besonderes	GESS (Science in Perspective): This lecture is for MSc students only. BSc students register for 363-1109-00L Einführung in die Mikroökonomie.

Interdisciplinary Energy Management
Nummer	Titel	Typ	ECTS	Umfang	Dozierende
227-1631-10L	Case Studies: Energy Systems and Technology: Part 1 Only for Energy Science and Technology MSc.	O	2 KP	4G	C. Franck, C. Schaffner
Kurzbeschreibung	This course will allow the students to get an interdisciplinary overview of the “Energy” topic. It will explore the challenges to build a sustainable energy system for the future. This will be done through the means of case studies that the students have to work on. These case studies will be provided by industry partners.
Lernziel	The students will understand the different aspects involved in designing solutions for a sustainable future energy system. They will have experience in collaborating in interdisciplinary teams. They will have an understanding on how industry is approaching new solutions.
Skript	Descriptions of case studies.

Wahlfächer
» Die Wahlfächer finden Sie hier.

Industriepraktikum For MEST students enrolled under the 2018 regulations
Nummer	Titel	Typ	ECTS	Umfang	Dozierende
227-1650-10L	Internship in Industry Only for MEST students enrolled under the 2018 regulations	O	12 KP		externe Veranstalter
Kurzbeschreibung	Es ist das Ziel der 12-wöchigen Praxis, Master-Studierenden die industriellen Arbeitsumgebungen näher zu bringen. Während dieser Zeit bietet sich ihnen die Gelegenheit, in aktuelle Projekte der Gastinstitution involviert zu werden.
Lernziel	siehe oben

Studienarbeit For MEST students enrolled under the 2018 regulations
Nummer	Titel	Typ	ECTS	Umfang	Dozierende
227-1101-00L	How to Write Scientific Texts in Engineering Sciences Strongly recommended prerequisite for Semester Projects and Master Theses at D-ITET (MSc BME, MSc EEIT, MSc EST).	E-	0 KP		J. Leuthold
Kurzbeschreibung	The 4 hour lecture covers the basics of writing & presenting a scientific text. The focus will be on the structure and elements of a scientific text and not on the language. Citation rules, good practice of scientific writing and an overview on software tools will be part of the training. The lecture will be thought on two afternoons. Some exercises will be built into the lecture.
Lernziel	Knowledge on structure and content of a scientific text. The course further is arranged to stimulate a discussion on how to properly write a legible scientific text versus writing an interesting novel. We will further discuss the practice of properly citing and critically reflect on recent plagiarism allegations.
Inhalt	* Topic 1: Structure of a Scientific Text (The Title, the author list, the abstract, State-of-the Art, the "in this paper" paragraph, the scientific part, the summary, Equations, Figures). * Topic 2: Power Point Presentations. * Topic 3: Citation Rules and Citation Software. * Topic 4: Guidelines for Research Integrity.
Literatur	ETH "Citation Etiquette", see www.plagiate.ethz.ch. ETH Guidlines on "Guidelines for Research Integrity", see www.ee.ethz.ch > Education > > Contacts, links & documents > Forms and documents > Brochures / guides.
Voraussetzungen / Besonderes	Students should already have a Bachelor degree and plan to do either a semester project or a master thesis in the immediate future.
227-1671-10L	Semester Project Only for MEST students enrolled under the 2018 regulations	O	12 KP	20A	Betreuer/innen
Kurzbeschreibung	The semester project is designed to train the students in solving specific problems from the field of Energy Science & Technology. This project uses the technical and social skills acquired during the master's program. The semester project ist advised by a professor and must be approved in advance by the tutor.
Lernziel	see above

Master-Studium (Studienreglement 2007)
Kernfächer
Obligatorische Kernfächer
Nummer	Titel	Typ	ECTS	Umfang	Dozierende
151-1633-00L	Energy Conversion This course is intended for students outside of D-MAVT.	O	4 KP	3G	I. Karlin, G. Sansavini
Kurzbeschreibung	This course provides the students with an introduction to thermodynamics and heat transfer. Students shall gain basic understanding of energy, energy interactions, and various mechanisms of heat transfer as well as their link to energy conversion technologies.
Lernziel	Thermodynamics is key to understanding and use of energy conversion processes in Nature and technology. Main objective of this course is to give a compact introduction into basics of Thermodynamics: Thermodynamic states and thermodynamic processes; Work and Heat; First and Second Laws of Thermodynamics. Students shall learn how to use energy balance equation in the analysis of power cycles and shall be able to evaluate efficiency of internal combustion engines, gas turbines and steam power plants. The course shall extensively use thermodynamic charts to building up students’ intuition about opportunities and restrictions to increase useful work output of energy conversion. Thermodynamic functions such as entropy, enthalpy and free enthalpy shall be used to understand chemical and phase equilibrium. The course also gives introduction to refrigeration cycles, combustion and psychrometry, as well as to basic principles of heat transfer. The course compactly covers the standard course of thermodynamics for engineers, with additional topics of a general physics interest (nonideal gas equation of state and Joule-Thomson effect) also included.
Inhalt	1. Thermodynamic systems, states and state variables 2. Properties of substances: Water, air and ideal gas 3. Energy conservation in closed and open systems: work, internal energy, heat and enthalpy 4. Second law of thermodynamics and entropy 5. Energy analysis of steam power cycles 6. Energy analysis of gas power cycles 7. Refrigeration and heat pump cycles 8. Nonideal gas equation of state and Joule-Thomson effect 9. Maximal work and exergy 10. Mixtures and psychrometry 11. Chemical reactions and combustion systems; chemical and phase equilibrium 12. Heat transfer
Skript	Lecture slides and supplementary documentation will be available online.
Literatur	Thermodynamics: An Engineering Approach, by Cengel, Y. A. and Boles, M. A., McGraw Hill
Voraussetzungen / Besonderes	This course is intended for students outside of D-MAVT. Students are assumed to have an adequate background in calculus, physics, and engineering mechanics.
227-0122-00L	Introduction to Electric Power Transmission: System & Technology	O	6 KP	4G	C. Franck, G. Hug
Kurzbeschreibung	Introduction to theory and technology of electric power transmission systems.
Lernziel	At the end of this course, the student will be able to: describe the structure of electric power systems, name the most important components and describe what they are needed for, apply models for transformers and lines, explain the technology of overhead power lines, calculate stationary power flows, current and voltage transients and other basic parameters in simple power systems.
Inhalt	Structure of electric power systems, transformer and power line models, analysis of and power flow calculation in basic systems, symmetrical and unsymmetrical three-phase systems, transient current and voltage processes, technology and principle of electric power systems.
Skript	Lecture script in English, exercises and sample solutions.

Wählbare Kernfächer
» Die Wählbaren Kernfächer finden Sie hier.

Multidisziplinfächer With the consent of the tutor, the students are free to choose individually from the entire course offer of ETH Zürich.
» Auswahl aus sämtlichen Lehrveranstaltungen der ETH Zürich

Industriepraktikum For MEST students enrolled under the 2007 regulations
Nummer	Titel	Typ	ECTS	Umfang	Dozierende
227-1650-00L	Internship in Industry Only for MEST students enrolled under the 2007 regulations	O	8 KP		externe Veranstalter
Kurzbeschreibung	Es ist das Ziel der 12-wöchigen Praxis, Master-Studierenden die industriellen Arbeitsumgebungen näher zu bringen. Während dieser Zeit bietet sich ihnen die Gelegenheit, in aktuelle Projekte der Gastinstitution involviert zu werden.
Lernziel	siehe oben

Studienarbeit For MEST students enrolled under the 2007 regulations
Nummer	Titel	Typ	ECTS	Umfang	Dozierende
227-1101-00L	How to Write Scientific Texts in Engineering Sciences Strongly recommended prerequisite for Semester Projects and Master Theses at D-ITET (MSc BME, MSc EEIT, MSc EST).	E-	0 KP		J. Leuthold
Kurzbeschreibung	The 4 hour lecture covers the basics of writing & presenting a scientific text. The focus will be on the structure and elements of a scientific text and not on the language. Citation rules, good practice of scientific writing and an overview on software tools will be part of the training. The lecture will be thought on two afternoons. Some exercises will be built into the lecture.
Lernziel	Knowledge on structure and content of a scientific text. The course further is arranged to stimulate a discussion on how to properly write a legible scientific text versus writing an interesting novel. We will further discuss the practice of properly citing and critically reflect on recent plagiarism allegations.
Inhalt	* Topic 1: Structure of a Scientific Text (The Title, the author list, the abstract, State-of-the Art, the "in this paper" paragraph, the scientific part, the summary, Equations, Figures). * Topic 2: Power Point Presentations. * Topic 3: Citation Rules and Citation Software. * Topic 4: Guidelines for Research Integrity.
Literatur	ETH "Citation Etiquette", see www.plagiate.ethz.ch. ETH Guidlines on "Guidelines for Research Integrity", see www.ee.ethz.ch > Education > > Contacts, links & documents > Forms and documents > Brochures / guides.
Voraussetzungen / Besonderes	Students should already have a Bachelor degree and plan to do either a semester project or a master thesis in the immediate future.
227-1671-00L	Semester Project Only for MEST students enrolled under the 2007 regulations.	O	8 KP	20A	Betreuer/innen
Kurzbeschreibung	The semester project is designed to train the students in solving specific problems from the field of Energy Science & Technology. This project uses the technical and social skills acquired during the master's program. The semester project ist advised by a professor and must be approved in advance by the tutor.
Lernziel	see above

Wahlfächer - Wählbare Kernfächer des Studienreglements 2007 - Wahlfächer des Studienreglements 2018 Diese Kurse sind besonders empfohlen, andere ETH-Kurse aus dem Feld Energy Science and Technology im weiteren Sinne können in Absprache mit dem Tutor gewählt werden.
Electrical Power Engineering
Nummer	Titel	Typ	ECTS	Umfang	Dozierende
227-0113-00L	Leistungselektronik	W	6 KP	4G	J. W. Kolar
Kurzbeschreibung	Verständnis der Grundfunktion leistungselektronischer Energieumformer, Einsatzbereiche. Methoden der Analyse des Betriebsverhaltens und des regelungstechnischen Verhaltens, Dimensionierung. Beurteilung der Beeinflussung umgebender Systeme, Elektromagnetische Verträglichkeit.
Lernziel	Verständnis der Grundfunktion leistungselektronischer Energieumformer, Einsatzbereiche. Methoden der Analyse des Betriebsverhaltens und des regelungstechnischen Verhaltens, Dimensionierung. Beurteilung der Beeinflussung umgebender Systeme, Elektromagnetische Verträglichkeit.
Inhalt	Grundstruktur leistungselektronischer Systeme, Beispiele. DC/DC-Konverter, Potentialtrennung. Regelungstechnische Modellierung von DC/DC-Konvertern, State-Space-Averaging, PWM-Switch-Model. Leistungshalbleiter, Nichtidealitäten, Kühlung. Magnetische Bauelemente, Skin- und Proximity- Effekt, Dimensionierung. EMV. Einphasen- Diodenbrücke mit kapazitiver Glättung, Netzrückwirkungen, Leistungsfaktorkorrektur. Selbstgeführte Einphasen- u. Dreiphasen-Brückenschaltung mit eingeprägter Ausgangsspannung, Modulation, Raumzeigerbegriff. Netzgeführte Einphasen-Brückenschaltung, Kommutierung, Wechselrichterbetrieb, WR-Kippen. Netzgeführte Dreiphasen-Brückenschaltung, ungesteuert und gesteuert/kapazitive und induktive Glättung. Parallelschaltung netzgeführter Stromrichter, Saugdrosselschaltung. Gegenparallelschaltung netzgeführter Dreiphasen-Brückenschaltungen, Vierquadranten-Gleichstrommaschinenantrieb. Resonanz-Thyristorstromrichter, u-Zi-Diagramm.
Skript	Skript und Simulationsprogramm für interaktives Lernen und Visualisierung, Uebungen mit Musterlösungen
Voraussetzungen / Besonderes	Voraussetzungen: Grundkenntnisse der Elektrotechnik und Signaltheorie.
227-0117-00L	High Voltage Engineering The lectures High Voltage Engineering I: Experimental Techniques (227-0117-10L) and High Voltage Engineering II: Insulation Technology (227-0117-00L) can be taken independently from one another.	W	6 KP	4G	C. Franck, U. Straumann
Kurzbeschreibung	High electric fields are used in numerous technological and industrial applications such as electric power transmission and distribution, X-ray devices, DNA sequencers, flue gas cleaning, power electronics, lasers, particle accelerators, copying machines, .... High Voltage Engineering is the art of gaining technological control of high electrical field strengths and high voltages.
Lernziel	The students know the fundamental phenomena and principles associated with the occurrence of high electric field strengths. They understand the different mechanisms leading to the failure of insulation systems and are able to apply failure criteria on the dimensioning of high voltage components. They have the ability to identify of weak spots in insulation systems and to propose options for improvement. Further, they know the different insulation systems and their dimensioning in practice.
Inhalt	- discussion of the field equations relevant for high voltage engineering. - analytical and numerical solutions/solving of this equations, as well as the derivation of the important equivalent circuits for the description of the fields and losses in insulations - introduction to kinetic gas theory - mechanisms of the breakdown in gaseous, liquid and solid insulations, as well as insulation systems - methods for the mathematical determination of the electric withstand of gaseous, liquid and solid insulations - application of the expertise on high voltage components - excursions to manufacturers of high voltage components
Skript	Handouts
Literatur	A. Küchler, High Voltage Engineering: Fundamentals – Technology – Applications, Springer Berlin, 2018 (ISBN 978-3-642-11992-7)
227-0247-00L	Power Electronic Systems I	W	6 KP	4G	J. W. Kolar
Kurzbeschreibung	Basics of the switching behavior, gate drive and snubber circuits of power semiconductors are discussed. Soft-switching and resonant DC/DC converters are analyzed in detail and high frequency loss mechanisms of magnetic components are explained. Space vector modulation of three-phase inverters is introduced and the main power components are designed for typical industry applications.
Lernziel	Detailed understanding of the principle of operation and modulation of advanced power electronics converter systems, especially of zero voltage switching and zero current switching non-isolated and isolated DC/DC converter systems and three-phase voltage DC link inverter systems. Furthermore, the course should convey knowledge on the switching frequency related losses of power semiconductors and inductive power components and introduce the concept of space vector calculus which provides a basis for the comprehensive discussion of three-phase PWM converters systems in the lecture Power Electronic Systems II.
Inhalt	Basics of the switching behavior and gate drive circuits of power semiconductor devices and auxiliary circuits for minimizing the switching losses are explained. Furthermore, zero voltage switching, zero current switching, and resonant DC/DC converters are discussed in detail; the operating behavior of isolated full-bridge DC/DC converters is detailed for different secondary side rectifier topologies; high frequency loss mechanisms of magnetic components of converter circuits are explained and approximate calculation methods are presented; the concept of space vector calculus for analyzing three-phase systems is introduced; finally, phase-oriented and space vector modulation of three-phase inverter systems are discussed related to voltage DC link inverter systems and the design of the main power components based on analytical calculations is explained.
Skript	Lecture notes and associated exercises including correct answers, simulation program for interactive self-learning including visualization/animation features.
Voraussetzungen / Besonderes	Prerequisites: Introductory course on power electronics.

Seite 1 von 3 Alle