Search result: Course units in Autumn Semester 2022
Mechanical Engineering Bachelor | ||||||
Bachelor Studies (Programme Regulations 2010) | ||||||
3. Semester: Compulsory Courses | ||||||
Examination Block 1 | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
---|---|---|---|---|---|---|
401-0363-10L | Analysis III | O | 3 credits | 2V + 1U | A. Iozzi | |
151-0503-00L | Dynamics | O | 6 credits | 4V + 2U | D. Kochmann | |
151-0303-00L | Dimensioning I | O | 3 credits | 3G | D. Mohr, B. Berisha, E. Mazza | |
151-0051-00L | Thermodynamics I | O | 4 credits | 2V + 2U | A. Bardow, C. Müller | |
151-0591-00L | Control Systems I Note: The previous course title in German until HS21 "Regelungstechnik I". | O | 4 credits | 2V + 2U | E. Frazzoli | |
Examination Block 2 | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
402-0033-10L | Physics I Der Kurs wird zum letzten Mal im HS22 angeboten. | O | 6 credits | 4V + 2U | L. Degiorgi | |
3. Semester: Engineering Tools The Engineering Tools courses are for MAVT Bachelor’s degree students only. | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0021-00L | Engineering Tool: Introduction to MATLAB The Engineering Tools courses are for MAVT Bachelor’s degree students only. | W+ | 0.4 credits | 1K | B. Berisha | |
252-0863-00L | Engineering Tool: Advanced Programming with C++ All Engineering Tool courses are for MAVT-Bachelor students only. | W+ | 0.4 credits | 1K | F. Friedrich Wicker | |
5. Semester: Compulsory Courses Examination Block 3 | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0261-00L | Thermodynamics III | O | 3 credits | 2V + 1U | R. S. Abhari, A. Steinfeld | |
151-0103-00L | Fluid Dynamics II | O | 3 credits | 2V + 1U | P. Jenny | |
Electives | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0573-00L | System Modeling | W | 4 credits | 2V + 1U | L. Guzzella | |
151-0575-01L | Signals and Systems | W | 4 credits | 2V + 2U | A. Carron | |
151-0917-00L | Mass Transfer | W | 4 credits | 2V + 2U | S. E. Pratsinis, V. Mavrantzas, C.‑J. Shih | |
151-0973-00L | Introduction to Process Engineering | W | 4 credits | 2V + 2U | F. Donat, C. Müller | |
151-3207-00L | Lightweight | W | 4 credits | 2V + 2U | P. Ermanni, T. Tancogne-Dejean, M. Zogg | |
227-0076-00L | Electrical Engineering II | W | 4 credits | 2V + 2U | C. Studer | |
351-0511-00L | Managerial Economics Not for MSc students belonging to D-MTEC! | W | 4 credits | 3V | O. Krebs, P. Egger, M. Köthenbürger | |
401-0435-00L | Computational Methods for Engineering Applications | W | 4 credits | 2V + 2U | S. Mishra | |
401-0603-00L | Stochastics (Probability and Statistics) This course unit is offered for the last time in the Autumn Semester 2022. | W | 4 credits | 2V + 1U | P. Cheridito | |
Focus Project | ||||||
Focus Projects in Mechatronics and Robotics | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0073-10L | GyroWheeler This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | R. Siegwart | |
151-0073-20L | SURF‐eDNA This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | R. Katzschmann | |
151-0073-30L | AirX Does not take place this semester. This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | M. Zeilinger | |
151-0073-40L | Magnetic Monkey This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | M. Hutter | |
151-0073-50L | MetaSuit This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | R. Katzschmann | |
Focus Projects in Manufacturing Science | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0075-10L | e‐Sling Hydrogen Powertrain This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | K. Wegener | |
151-0075-20L | Formula Student Electric This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | D. Mohr | |
151-0075-30L | eXact - Intelligent Full Electric Excavator This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | A. Kunz | |
Focus Projects in Energy, Flows and Processes | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0076-10L | αCentauri This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | P. Jenny | |
151-0076-20L | H2Go This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | K. Wegener | |
151-0076-30L | ARIS - Liquid Rocket Engine This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | M. Bambach | |
Focus Projects in Engineering for Health | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0077-10L | byPulse This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus-Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | M. Meboldt | |
151-0077-20L | SONANO - Optoacoustic Contrast Agents This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | I. Herrmann | |
Focus Projects in Design, Mechanics and Materials | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0079-10L | Multidrone Does not take place this semester. This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | P. Ermanni | |
151-0079-20L | Retex - Textile Recycling This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | P. Ermanni | |
151-0079-30L | Swissloop ‐ Scaling to Reality This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | D. Kochmann | |
151-0079-40L | Swissloop Tunneling Does not take place this semester. This course is part of a one-year course. The 14 credit points will be issued at the end of FS2023 with new enrolling for the same Focus-Project in FS2023. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | L. De Lorenzis | |
Courses Eligible for Focus Projects | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0079-99L | Vacuum Transport Seminar: Insights into Hyperloop Research | E- | 0 credits | 1S | D. Kochmann | |
151-0761-00L | Practice Course Product Development Only students for focus projects. 2 up to 3 students per focus project. | W | 1 credit | 1G | M. Meboldt, C. R. Dietzsch, C. Schorno, M. Schütz | |
151-0763-00L | Practice Course to Focus Projects on CAD and CAE Based on Siemens NX - Max. 3 Students by one Focus Team allowed - Course is only useful and recommended for students using CAD and CAE Tools for their duty within the project itself - Feel free to contact us, if there are open questions: Link | W | 3 credits | 3G | J.‑L. Emery, M. Schütz | |
Focus Specialization | ||||||
Energy, Flows and Processes Focus Coordinator: Prof. Christoph Müller In order to achieve the required 20 credit points for the Focus Specialization Energy, Flows and Processes you need to choose at least 2 core courses (W+) (HS/FS) and at least 2 of the elective courses (HS/FS), according to the presentation of the Focus Specialisation (see Link). One course can be selected among all the courses offered by D-MAVT (Bachelors and Masters). | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0123-00L | Experimental Methods for Engineers | W+ | 4 credits | 2V + 2U | D. J. Norris, F. Coletti, M. Lukatskaya, A. Manera, G. Nagamine Gomez, B. Schuermans, O. Supponen, M. Tibbitt | |
151-0293-00L | Combustion and Reactive Processes in Energy and Materials Technology | W+ | 4 credits | 2V + 1U + 2A | N. Noiray, F. Ernst, C. E. Frouzakis | |
151-0221-00L | Introduction to Modeling and Optimization of Sustainable Energy Systems | W | 4 credits | 4G | G. Sansavini, A. Bardow | |
151-0109-00L | Turbulent Flows | W | 4 credits | 2V + 1U | P. Jenny | |
151-0913-00L | Introduction to Photonics | W | 4 credits | 2V + 2U | R. Quidant, J. Ortega Arroyo | |
151-0917-00L | Mass Transfer | W | 4 credits | 2V + 2U | S. E. Pratsinis, V. Mavrantzas, C.‑J. Shih | |
151-0973-00L | Introduction to Process Engineering | W | 4 credits | 2V + 2U | F. Donat, C. Müller | |
Mechatronics and Robotics Focus Coordinator: Prof. Marco Hutter | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0509-00L | Acoustics in Fluid Media: From Robotics to Additive Manufacturing Note: The previous course title until HS21 "Microscale Acoustofluidics" | W | 4 credits | 3G | D. Ahmed | |
151-0575-01L | Signals and Systems | W | 4 credits | 2V + 2U | A. Carron | |
151-0601-00L | Theory of Robotics and Mechatronics Does not take place this semester. | W | 4 credits | 3G | to be announced | |
151-0604-00L | Microrobotics | W | 4 credits | 3G | B. Nelson | |
151-0621-00L | Microsystems I: Process Technology and Integration | W | 6 credits | 3V + 3U | M. Haluska, C. Hierold | |
151-0640-00L | Studies on Mechatronics The supervising professors can be selected in myStudies during registration of the course. For exceptions please contact the focus coordinator and Link. This course is not available to incoming exchange students. | W | 5 credits | 11A | Supervisors | |
151-0913-00L | Introduction to Photonics | W | 4 credits | 2V + 2U | R. Quidant, J. Ortega Arroyo | |
227-0113-00L | Power Electronics | W | 6 credits | 4G | J. W. Kolar | |
227-0124-00L | Embedded Systems | W | 6 credits | 4G | M. Magno, L. Thiele | |
227-0517-10L | Fundamentals of Electric Machines | W | 6 credits | 4G | D. Bortis, R. Bosshard | |
376-1504-00L | Physical Human Robot Interaction (pHRI) | W | 4 credits | 2V + 2U | O. Lambercy | |
Microsystems and Nanoscale Engineering Focus Coordinator: Prof. Christofer Hierold | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0621-00L | Microsystems I: Process Technology and Integration | W+ | 6 credits | 3V + 3U | M. Haluska, C. Hierold | |
151-0509-00L | Acoustics in Fluid Media: From Robotics to Additive Manufacturing Note: The previous course title until HS21 "Microscale Acoustofluidics" | W | 4 credits | 3G | D. Ahmed | |
151-0604-00L | Microrobotics | W | 4 credits | 3G | B. Nelson | |
151-0643-00L | Studies on Micro and Nano Systems This course is not available to incoming exchange students. | W | 5 credits | 11A | Supervisors | |
151-0902-00L | Micro- and Nanoparticle Technology Number of participants is limited to 20. Additional ones could be enrolled by permission of the lecturer. | W | 6 credits | 2V + 2U | S. E. Pratsinis, V. Mavrantzas, K. Wegner | |
151-0913-00L | Introduction to Photonics | W | 4 credits | 2V + 2U | R. Quidant, J. Ortega Arroyo | |
151-0135-00L | Additional Case for the Focus Specialization Exclusive for D-MAVT Bachelor's students in Focus Specialization. For enrollment, please contact the D-MAVT Student Administration. | W | 1 credit | 2A | Professors | |
Manufacturing Science Focus Coordinator: Prof. Konrad Wegener To achieve the required 20 credit points for the focus specialization you need to pass at least 2 core courses (W+ in HS/FS). The other 12 credit points can be achieved from the elective courses (in HS/FS). | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0705-00L | Manufacturing I | W+ | 4 credits | 2V + 2U | K. Wegener, M. Wiessner | |
151-0733-00L | Basics and Processes of Metal Forming Note: The previous course title until HS21 "Forming Technology III - Forming Processes". | W+ | 4 credits | 2V + 2U | M. Bambach | |
151-0703-00L | Operational Simulation of Production Lines | W | 4 credits | 2V + 1U | P. Acél | |
151-0717-00L | Mechanical Production: Assembly, Joining and Coating Technology | W | 4 credits | 2V + 1U | K. Wegener, V. H. Derflinger, P. Jousset | |
151-0719-00L | Quality of Machine Tools - Dynamics and Metrology at Micro and Submicro Level | W | 4 credits | 2V + 1U | A. Günther, D. Spescha | |
151-0723-00L | Manufacturing of Electronic Devices | W | 4 credits | 3G | A. Kunz, R.‑D. Moryson, F. Reichert | |
151-0833-00L | Applied Finite Element Analysis | W | 4 credits | 2V + 2U | B. Berisha, D. Mohr | |
Engineering for Health Focus Coordinator: Prof. Bradley Nelson | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0509-00L | Acoustics in Fluid Media: From Robotics to Additive Manufacturing Note: The previous course title until HS21 "Microscale Acoustofluidics" | W | 4 credits | 3G | D. Ahmed | |
151-0524-00L | Continuum Mechanics I | W | 4 credits | 2V + 1U | A. E. Ehret | |
151-0604-00L | Microrobotics | W | 4 credits | 3G | B. Nelson | |
151-0621-00L | Microsystems I: Process Technology and Integration | W | 6 credits | 3V + 3U | M. Haluska, C. Hierold | |
151-0629-00L | Studies on Engineering for Health The student is responsible to find a project offered and supervised by ETH Professor in the area of Engineering for Health. Once received the approval of the ETH professor the student should forward the approval and the content of the project to the Student Administration Link for the enrolment. This course is not available to incoming exchange students. | W | 5 credits | 11A | Supervisors | |
151-8101-00L | International Engineering: from Hubris to Hope | W | 4 credits | 3G | E. Tilley, M. Kalina | |
227-0385-10L | Biomedical Imaging | W | 6 credits | 5G | S. Kozerke, K. P. Prüssmann | |
227-0393-10L | Bioelectronics and Biosensors | W | 6 credits | 2V + 2U | J. Vörös, M. F. Yanik | |
376-0021-00L | Materials and Mechanics in Medicine | W | 4 credits | 3G | M. Zenobi-Wong, J. G. Snedeker | |
376-0203-00L | Movement and Sport Biomechanics | W | 4 credits | 3G | W. R. Taylor, R. List | |
376-1504-00L | Physical Human Robot Interaction (pHRI) | W | 4 credits | 2V + 2U | O. Lambercy | |
376-1714-00L | Biocompatible Materials | W | 4 credits | 3V | K. Maniura, M. Rottmar, M. Zenobi-Wong | |
Management, Technology and Economics Focus Coordinators: Prof. Stefano Brusoni D-MTEC and Swantje Pless D-MTEC | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0733-00L | Basics and Processes of Metal Forming Note: The previous course title until HS21 "Forming Technology III - Forming Processes". | W | 4 credits | 2V + 2U | M. Bambach | |
363-0445-00L | Production and Operations Management | W+ | 3 credits | 2G | T. Netland, H. Franke | |
363-0541-00L | Systems Dynamics and Complexity | W+ | 3 credits | 3G | F. Schweitzer | |
363-0541-02L | Systems Dynamics and Complexity (Additional Cases) Only for Mechanical Engineering BSc. | W+ | 1 credit | G. Casiraghi | ||
351-0778-00L | Discovering Management Entry level course in management for BSc, MSc and PHD students at all levels not belonging to D-MTEC. This course can be complemented with Discovering Management (Excercises) 351-0778-01. | W | 3 credits | 3G | B. Clarysse, S. Brusoni, F. Da Conceição Barata, H. Franke, V. Hoffmann, P. Tinguely, L. P. T. Vandeweghe | |
351-0778-01L | Discovering Management (Exercises) Complementary exercises for the module Discovering Managment. Prerequisite: Participation and successful completion of the module Discovering Management (351-0778-00L) is mandatory. | W | 1 credit | 1U | B. Clarysse, L. P. T. Vandeweghe | |
363-0387-00L | Corporate Sustainability | W | 3 credits | 2G | V. Hoffmann, J. Meuer, A. Nunez-Jimenez | |
363-0389-00L | Technology and Innovation Management | W | 3 credits | 2G | S. Brusoni, A. Zeijen | |
363-0389-02L | Technology and Innovation Management (Additional Cases) Only for Mechanical Engineering BSc. | W | 1 credit | 1U | S. Brusoni | |
363-0565-00L | Principles of Macroeconomics | W | 3 credits | 2V | J.‑E. Sturm | |
363-0711-00L | Accounting for Managers | W | 3 credits | 2V | H. Chen | |
363-0790-00L | Technology Entrepreneurship | W | 2 credits | 2V | F. Hacklin | |
363-1082-00L | Enabling Entrepreneurship: From Science to Startup Students should provide a brief overview (unto 1 page) of their business ideas that they would like to commercialise through the course. If they do not have an idea, they are required to provide a motivation letter stating why they would like to do this elective. If you are unsure about the readiness of your idea or technology to be converted into a startup, please drop me a line to schedule a call or meeting to discuss. The total number of students will be limited to 50. The students should submit the necessary information until 19 September 2022 and apply to Link | W | 3 credits | 2V | A. Sethi | |
363-1017-00L | Risk and Insurance Economics | W | 3 credits | 2G | H. Schernberg | |
351-1109-00L | Introduction to Microeconomics GESS (Science in Perspective): This course is only for students enrolled in a Bachelor’s degree programme. Students enrolled in a Master’s degree programme may attend “Principles of Microeconomics” (LE 363-0503-00L) instead. Note for D-MAVT students: If you have already successfully completed “Principles of Microeconomics” (LE 363-0503-00L), then you will not be permitted to attend it again. | W | 3 credits | 2G | M. Wörter, M. Beck | |
Design, Mechanics and Materials Focus Coordinator: Prof. Kristina Shea In order to achieve the required 20 credit points for the Focus Specialization Design, Mechanics and Material you are free to choose any of the courses offered within the focus and are encouraged to select among those recommended. If you wish to take one of the Master level courses, you must get approval from the lecturer. | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0364-00L | Lightweight Structures Laboratory Number of participants limited to 24. | W+ | 4 credits | 5A | M. Zogg, P. Ermanni | |
151-3207-00L | Lightweight | W+ | 4 credits | 2V + 2U | P. Ermanni, T. Tancogne-Dejean, M. Zogg | |
151-3213-00L | Integrative Ski Building Workshop Number of participants limited to 12. To apply, please send the following information to Link by 31.08.2022: Letter of Motivation (one page) , CV, Transcript of Records. | W+ | 4 credits | 9P | K. Shea | |
151-0509-00L | Acoustics in Fluid Media: From Robotics to Additive Manufacturing Note: The previous course title until HS21 "Microscale Acoustofluidics" | W | 4 credits | 3G | D. Ahmed | |
151-0524-00L | Continuum Mechanics I | W | 4 credits | 2V + 1U | A. E. Ehret | |
151-0544-00L | Metal Additive Manufacturing - Mechanical Integrity and Numerical Analysis | W | 4 credits | 3G | E. Hosseini | |
151-3209-00L | Engineering Design Optimization Number of participants limited to 60. | W | 4 credits | 4G | K. Shea, T. Stankovic | |
327-1204-00L | Materials at Work I | W | 4 credits | 4S | R. Spolenak, E. Dufresne, R. Koopmans | |
5. Semester: Engineering Tools The Engineering Tools courses are for MAVT Bachelor’s degree students only. | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0015-10L | Engineering Tool: Experimental Modal Analysis All Engineering Tools courses are for MAVT Bachelor’s degree students only. Number of participants limited to 16. | W | 0.4 credits | 1K | D. Spescha | |
151-0025-10L | Engineering Tool: Introduction to CAM and Motion Simulation All Engineering Tools courses are for MAVT Bachelor’s degree students only. Number of participants limited to 40. | W | 0.4 credits | 1K | M. Schmid | |
151-0027-10L | Engineering Tool: Programming with LabView All Engineering Tools courses are for MAVT Bachelor’s degree students only. Number of participants limited to 16. | W | 0.4 credits | 1K | L. Prochazka | |
151-0030-10L | Engineering Tool: Modelling and Servo Axis Control of Machine Tool Manipulators All Engineering Tools courses are for MAVT Bachelor’s degree students only. Number of participants limited to 30. | W | 0.4 credits | 1K | O. Zirn | |
151-0032-10L | Engineering Tool: Introduction to the Methods of Six Sigma Quality Control and Lean Production All Engineering Tools courses are for MAVT Bachelor’s degree students only. Number of participants limited to 36. | W | 0.4 credits | 1K | B. G. Rüttimann | |
151-0047-00L | Engineering Tool: Agile Product Development All Engineering Tools courses are for MAVT Bachelor’s degree students only. Number of participants limited to 12. | W | 0.4 credits | 1K | M. Meboldt | |
151-0057-10L | Engineering Tool: Systems Engineering for Project Work All Engineering Tools courses are for MAVT Bachelor’s degree students only. Number of participants limited to 60. | W | 0.4 credits | 1K | R. Züst | |
151-0059-10L | Engineering Tool: CAD-Methodology and PDM-Technology in the Focus Project All Engineering Tools courses are for MAVT Bachelor’s degree students only. | W | 0.4 credits | 1K | M. Schütz | |
151-0061-10L | Engineering Tool: Scientific Writing with LaTeX and Vector Graphics All Engineering Tools courses are for MAVT Bachelor’s degree students only. Number of participants limited to 80. | W | 0.4 credits | 1K | O. Lambercy | |
151-0062-10L | Engineering Tool: Computer-Aided Design Methods All Engineering Tools courses are for MAVT Bachelor’s degree students only. Number of participants limited to 25. | W | 0.4 credits | 1K | T. Stankovic, K. Shea | |
151-0067-10L | Engineering Tool: Sketching and Visualization of Technical Concepts All Engineering Tools courses are for MAVT Bachelor’s degree students only. Number of participants limited to 20. | W | 0.4 credits | 1K | H. Stahl | |
151-0091-10L | Engineering Tool: Scientific Writing All Engineering Tools courses are for MAVT Bachelor’s degree students only. | W | 0.4 credits | 1K | T. Korner, A. N'Guyen van Chinh | |
252-0864-00L | Engineering Tool: Parallel and Concurrent Programming in C++ All Engineering Tool courses are for MAVT-Bachelor students only. | W | 0.4 credits | 1K | M. Schwerhoff | |
Workshop Training | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0003-00L | Workshop Training Placement of internships and request for recognition under Link. | O | 5 credits | external organisers | ||
Laboratory Practice Students attend at least 10 Laboratory Practices during the 4th and 5th semester. 4 of them must be Physics laboratories. All laboratory works are graded "pass" or "fail". After completion of 10 laboratory training units, 2 credit points will be issued. Please register online at Link | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0029-10L | Laboratory Practice Enrollment is only possible under Link. No registration required via myStudies. | O | 2 credits | 4P | Lecturers | |
Bachelor's Thesis | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0001-10L | Bachelor's Thesis Only for Mechanical Engineering BSc, Programme Regulations 2010. Supervisor for the Bachelor's Thesis: - All D-MAVT professors (Link) | W | 14 credits | 30D | Supervisors | |
151-3630-00L | Bachelor's Thesis (Focus Specialization Management, Technology and Economics) Only for Mechanical Engineering BSc, Programme Regulations 2010. Supervisor for the Bachelor's Thesis: All D-MTEC professors (Link) | W | 14 credits | 30D | Professors |