Maschineningenieurwissenschaften Master |
Kernfächer |
Energy, Flows and Processes
Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. |
Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
---|
151-0060-00L | Thermodynamics and Transport Phenomena in Nanotechnology | W | 4 KP | 2V + 2U | T. Schutzius,
D. Taylor |
151-0106-00L | Orbital Dynamics | W | 4 KP | 3G | A. A. Kubik |
151-0110-00L | Compressible Flows | W | 4 KP | 2V + 1U | T. Rösgen |
151-0116-10L | High Performance Computing for Science and Engineering (HPCSE) for Engineers II | W | 4 KP | 4G | P. Koumoutsakos,
S. M. Martin |
151-0156-00L | Safety of Nuclear Power Plants | W | 4 KP | 2V + 1U | H.‑M. Prasser,
V. Dang,
L. Podofillini |
151-0160-00L | Nuclear Energy Systems | W | 4 KP | 2V + 1U | H.‑M. Prasser,
P. Burgherr,
I. Günther-Leopold,
W. Hummel,
T. Kämpfer,
T. Kober,
X. Zhang |
151-0166-00L | Physics of Nuclear Reactor II | W | 4 KP | 3G | K. Mikityuk,
A. Pautz,
S. Pelloni |
151-0170-00L | Computational Multiphase Thermal Fluid Dynamics | W | 4 KP | 2V + 1U | F. Coletti,
A. Dehbi,
Y. Sato |
151-0212-00L | Advanced CFD Methods | W | 4 KP | 2V + 1U | P. Jenny |
151-0224-00L | Fuel Synthesis Engineering | W | 4 KP | 3V | B. Bulfin,
A. Lidor |
151-0232-00L | Engineering Acoustics II | W | 4 KP | 3G | N. Noiray,
S. M. Schoenwald,
B. Van Damme |
151-0252-00L | Gasturbinen: Prozesse und Verbrennungssysteme | W | 4 KP | 2V + 1U | P. Jansohn |
151-0254-00L | Environmental Aspects of Future Mobility Note: previous course title in FS20 "Environmental Aspects of IC-Engines" | W | 4 KP | 2V + 1U | Y. Wright,
P. Dimopoulos Eggenschwiler |
151-0280-00L | Advanced Techniques for the Risk Analysis of Technical Systems | W | 4 KP | 2V + 1U | G. Sansavini |
151-0530-00L | Nonlinear Dynamics and Chaos II | W | 4 KP | 4G | G. Haller |
151-0928-00L | CO2 Capture and Storage and the Industry of Carbon-Based Resources | W | 4 KP | 3G | M. Mazzotti,
A. Bardow,
P. Eckle,
N. Gruber,
M. Repmann,
T. Schmidt,
D. Sutter |
151-0944-00L | Case Studies on Earth's Natural Resources Findet dieses Semester nicht statt. | W | 3 KP | 3S | M. Mazzotti |
151-0946-00L | Macromolecular Engineering: Networks and Gels | W | 4 KP | 4G | M. Tibbitt |
151-0980-00L | Biofluiddynamics | W | 4 KP | 2V + 1U | D. Obrist,
P. Jenny |
151-1115-00L | Ausgewählte Kapitel der Flugtechnik | W | 4 KP | 3G | J. Wildi |
151-1906-00L | Multiphase Flows | W | 4 KP | 3G | F. Coletti |
151-2017-00L | Nuclear Fuels and Materials | W | 4 KP | 3G | M. A. Pouchon,
P. J.‑P. Spätig |
151-0228-00L | Management of Air Transport (Aviation II) | W | 4 KP | 3G | P. Wild |
151-0230-00L | Plasma Science in Engineering | W | 4 KP | 2V + 1U | R. S. Abhari,
A. Giovannini |
227-0455-00L | Terahertz: Technology and Applications | W | 5 KP | 3G + 3A | K. Sankaran |
|
Mechanics, Materials, Structures
Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. |
Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
---|
151-0116-10L | High Performance Computing for Science and Engineering (HPCSE) for Engineers II | W | 4 KP | 4G | P. Koumoutsakos,
S. M. Martin |
151-0232-00L | Engineering Acoustics II | W | 4 KP | 3G | N. Noiray,
S. M. Schoenwald,
B. Van Damme |
151-0304-00L | Dimensionieren II | W | 4 KP | 4G | K. Wegener |
151-0306-00L | Visualization, Simulation and Interaction - Virtual Reality I | W | 4 KP | 4G | A. Kunz |
151-0314-00L | Informationstechnologien im digitalen Produkt | W | 4 KP | 3G | E. Zwicker,
R. Montau |
151-0318-00L | Ecodesign - Umweltgerechte Produktgestaltung | W | 4 KP | 3G | R. Züst |
151-0324-00L | GL zum Bemessen von Kunststoffbauteilen | W | 4 KP | 2V + 1U | G. P. Terrasi |
151-0332-00L | Interdisciplinary Product Development: Definition, Realisation and Validation of Product Concepts Number of participants limited to: 5 (ETHZ) + 20 (ZHdK) To apply for the course please create a pdf of 2+ Pages describing yourself and your motivation for the course as well as one or more of your former development projects. Please add minimum one picture and your CV as well, send the pdf to Link. | W | 4 KP | 2G + 4A | M. Schütz |
151-0366-00L | Aircraft Structures | W | 4 KP | 2V + 1U | P. Ermanni |
151-0513-00L | Mechanics of Soft Materials and Tissues | W | 4 KP | 3G | A. E. Ehret |
151-0515-00L | Continuum Mechanics 2 | W | 4 KP | 2V + 1U | E. Mazza,
R. Hopf |
151-0516-00L | Nicht-glatte Dynamik Diese Lerneinheit wird zum letzten Mal im FS21 angeboten. | W | 5 KP | 5G | C. Glocker |
151-0518-00L | Computational Mechanics I: Intro to FEA | W | 4 KP | 4G | D. Kochmann |
151-0520-00L | Multiscale Modeling | W | 4 KP | 3G | D. Kochmann |
151-0522-00L | Case Studies in Computer Aided Engineering - Applied FEM | W | 4 KP | 3G | D. Valtorta |
151-0528-00L | Theory of Phase Transitions | W | 4 KP | 3G | L. Guin,
D. Kochmann |
151-0530-00L | Nonlinear Dynamics and Chaos II | W | 4 KP | 4G | G. Haller |
151-0534-00L | Advanced Dynamics | W | 4 KP | 3V + 1U | P. Tiso |
151-0540-00L | Experimentelle Mechanik | W | 4 KP | 2V + 1U | J. Dual,
T. Brack |
151-0544-00L | Metal Additive Manufacturing - Mechanical Integrity and Numerical Analysis Findet dieses Semester nicht statt. | W | 4 KP | 3G | |
151-0548-00L | Manufacturing of Polymer Composites Number of participants limited to 32. | W | 6 KP | 3G + 2P | P. Ermanni |
151-0552-00L | Fracture Mechanics | W | 4 KP | 3G | L. De Lorenzis |
151-0566-00L | Recursive Estimation | W | 4 KP | 2V + 1U | R. D'Andrea |
151-0708-00L | Fertigungstechnik II | W | 4 KP | 2V + 1U | K. Wegener,
M. Schmid,
S. Weikert |
151-0718-00L | Qualitätssicherung - Werkstückmesstechnik | W | 4 KP | 2V + 2U | A. Günther |
151-0720-00L | Produktionsmaschinen I | W | 4 KP | 4G | K. Wegener,
S. Weikert |
151-0740-00L | Metal Additive Manufacturing – Fundamentals and Process Technology | W | 4 KP | 2V + 2U | M. Bambach,
L. Deillon,
A. K. Eissing |
151-0802-00L | Automation Technology | W | 4 KP | 2V + 1U | H. Wild,
K. Wegener |
151-0840-00L | Optimization and Machine Learning Note: previous course title until FS20 "Principles of FEM-Based Optimization and Robustness Analysis". | W | 4 KP | 2V + 2U | B. Berisha,
D. Mohr |
151-1224-00L | Ölhydraulik und Pneumatik | W | 4 KP | 2V + 2U | J. Lodewyks |
151-1550-00L | Seminar in Mechanik | E- | 0 KP | 2S | J. Dual,
G. Haller,
E. Mazza |
252-0220-00L | Introduction to Machine Learning Limited number of participants. Preference is given to students in programmes in which the course is being offered. All other students will be waitlisted. Please do not contact Prof. Krause for any questions in this regard. If necessary, please contact Link | W | 8 KP | 4V + 2U + 1A | A. Krause,
F. Yang |
363-0448-00L | Global Operations Strategy | W | 3 KP | 2G | T. Netland |
363-0768-00L | Ringvorlesung ETH und UZH: Logistik-Management | W | 3 KP | 2V | T. Netland,
H. Dietl |
376-1178-00L | Human Factors II | W | 3 KP | 2V | M. Menozzi Jäckli,
R. Huang,
M. Siegrist |
376-1217-00L | Rehabilitation Engineering I: Motor Functions | W | 4 KP | 2V + 1U | S. Raspopovic,
M. Xiloyannis |
|
Robotics, Systems and Control
Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. |
Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
---|
151-0116-10L | High Performance Computing for Science and Engineering (HPCSE) for Engineers II | W | 4 KP | 4G | P. Koumoutsakos,
S. M. Martin |
151-0310-00L | Model Predictive Engine Control Number of participants limited to 55. | W | 4 KP | 2V + 1U | T. Albin Rajasingham |
151-0314-00L | Informationstechnologien im digitalen Produkt | W | 4 KP | 3G | E. Zwicker,
R. Montau |
151-0318-00L | Ecodesign - Umweltgerechte Produktgestaltung | W | 4 KP | 3G | R. Züst |
151-0530-00L | Nonlinear Dynamics and Chaos II | W | 4 KP | 4G | G. Haller |
151-0534-00L | Advanced Dynamics | W | 4 KP | 3V + 1U | P. Tiso |
151-0566-00L | Recursive Estimation | W | 4 KP | 2V + 1U | R. D'Andrea |
151-0593-00L | Embedded Control Systems | W | 4 KP | 6G | J. S. Freudenberg,
M. Schmid Daners |
151-0630-00L | Nanorobotics | W | 4 KP | 2V + 1U | S. Pané Vidal |
151-0634-00L | Perception and Learning for Robotics Number of participants limited to: 30 To apply for the course please create a CV in pdf of max. 2 pages, including your machine learning and/or robotics experience. Please send the pdf to Link for approval. | W | 4 KP | 9A | C. D. Cadena Lerma,
J. J. Chung |
151-0641-00L | Introduction to Robotics and Mechatronics Number of participants limited to 45. Enrollment is only valid through registration on the MSRL website ( Link). Registrations per e-mail is no longer accepted! | W | 4 KP | 2V + 2U | B. Nelson,
N. Shamsudhin |
151-0660-00L | Model Predictive Control | W | 4 KP | 2V + 1U | M. Zeilinger,
A. Carron |
151-0854-00L | Autonomous Mobile Robots | W | 5 KP | 4G | R. Siegwart,
M. Chli,
N. Lawrance |
151-9904-00L | Applied Compositional Thinking for Engineers | W | 4 KP | 3G | E. Frazzoli,
A. Censi,
J. Lorand |
151-1115-00L | Ausgewählte Kapitel der Flugtechnik | W | 4 KP | 3G | J. Wildi |
101-0521-10L | Machine Learning for Predictive Maintenance Applications The number of participants in the course is limited to 25 students. Students interested in attending the lecture are requested to upload their transcript and a short motivation responding the following two questions (max. 200 words): -How does this course fit to the other courses you have attended so far? -How does the course support you in achieving your goal? The following link can be used to upload the documents. Link | W | 8 KP | 4G | O. Fink |
103-0848-00L | Industrial Metrology and Machine Vision Number of participants limited to 30. | W | 4 KP | 3G | K. Schindler,
D. Salido Monzú |
227-0216-00L | Control Systems II | W | 6 KP | 4G | R. Smith |
227-0224-00L | Stochastic Systems Findet dieses Semester nicht statt. | W | 4 KP | 2V + 1U | Noch nicht bekannt |
252-0220-00L | Introduction to Machine Learning Limited number of participants. Preference is given to students in programmes in which the course is being offered. All other students will be waitlisted. Please do not contact Prof. Krause for any questions in this regard. If necessary, please contact Link | W | 8 KP | 4V + 2U + 1A | A. Krause,
F. Yang |
252-0526-00L | Statistical Learning Theory | W | 8 KP | 3V + 2U + 2A | J. M. Buhmann,
C. Cotrini Jimenez |
252-0579-00L | 3D Vision | W | 5 KP | 3G + 1A | M. Pollefeys,
V. Larsson |
263-5806-00L | Computational Models of Motion | W | 8 KP | 2V + 2U + 3A | S. Coros,
M. Bächer,
B. Thomaszewski |
376-1217-00L | Rehabilitation Engineering I: Motor Functions | W | 4 KP | 2V + 1U | S. Raspopovic,
M. Xiloyannis |
376-1308-00L | Development Strategies for Medical Implants Maximale Teilnehmerzahl: 25 bis 30. Die Einschreibungen werden nach chronologischem Eingang berücksichtigt. | W | 3 KP | 2V + 1U | J. Mayer-Spetzler |
227-0690-12L | Advanced Topics in Control (Spring 2021) New topics are introduced every year. | W | 4 KP | 2V + 2U | F. Dörfler,
M. Hudoba de Badyn,
W. Mei |
|
Micro & Nanosystems
Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. |
Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
---|
151-0060-00L | Thermodynamics and Transport Phenomena in Nanotechnology | W | 4 KP | 2V + 2U | T. Schutzius,
D. Taylor |
151-0116-10L | High Performance Computing for Science and Engineering (HPCSE) for Engineers II | W | 4 KP | 4G | P. Koumoutsakos,
S. M. Martin |
151-0172-00L | Microsystems II: Devices and Applications | W | 6 KP | 3V + 3U | C. Hierold,
C. I. Roman |
151-0530-00L | Nonlinear Dynamics and Chaos II | W | 4 KP | 4G | G. Haller |
151-0620-00L | Embedded MEMS Lab Number of participants limited to 20. | W | 5 KP | 3P | C. Hierold,
M. Haluska |
151-0622-00L | Measuring on the Nanometer Scale | W | 2 KP | 2G | A. Stemmer |
151-0628-00L | Scanning Probe Microscopy Lab Limited number of participants. Please address your application to Andreas Stemmer ( Link). Simultaneous enrolment in 151-0622-00L Measuring on the Nanometer Scale is required. | W | 2 KP | 2P | A. Stemmer |
151-0630-00L | Nanorobotics | W | 4 KP | 2V + 1U | S. Pané Vidal |
151-0642-00L | Seminar on Micro and Nanosystems | E- | 0 KP | 1S | C. Hierold |
151-0931-00L | Seminar on Particle Technology | E- | 0 KP | 3S | S. E. Pratsinis |
227-0455-00L | Terahertz: Technology and Applications | W | 5 KP | 3G + 3A | K. Sankaran |
227-0662-00L | Organic and Nanostructured Optics and Electronics (Course) Findet dieses Semester nicht statt. | W | 3 KP | 2G | V. Wood |
227-0662-10L | Organic and Nanostructured Optics and Electronics (Project) Findet dieses Semester nicht statt. | W | 3 KP | 2A | V. Wood |
|
Bioengineering
Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. |
Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
---|
151-0060-00L | Thermodynamics and Transport Phenomena in Nanotechnology | W | 4 KP | 2V + 2U | T. Schutzius,
D. Taylor |
151-0116-10L | High Performance Computing for Science and Engineering (HPCSE) for Engineers II | W | 4 KP | 4G | P. Koumoutsakos,
S. M. Martin |
151-0306-00L | Visualization, Simulation and Interaction - Virtual Reality I | W | 4 KP | 4G | A. Kunz |
151-0522-00L | Case Studies in Computer Aided Engineering - Applied FEM | W | 4 KP | 3G | D. Valtorta |
151-0530-00L | Nonlinear Dynamics and Chaos II | W | 4 KP | 4G | G. Haller |
151-0630-00L | Nanorobotics | W | 4 KP | 2V + 1U | S. Pané Vidal |
151-0641-00L | Introduction to Robotics and Mechatronics Number of participants limited to 45. Enrollment is only valid through registration on the MSRL website ( Link). Registrations per e-mail is no longer accepted! | W | 4 KP | 2V + 2U | B. Nelson,
N. Shamsudhin |
151-0946-00L | Macromolecular Engineering: Networks and Gels | W | 4 KP | 4G | M. Tibbitt |
151-0980-00L | Biofluiddynamics | W | 4 KP | 2V + 1U | D. Obrist,
P. Jenny |
227-0455-00L | Terahertz: Technology and Applications | W | 5 KP | 3G + 3A | K. Sankaran |
227-0945-10L | Cell and Molecular Biology for Engineers II This course is part II of a two-semester course. Knowledge of part I is required. | W | 3 KP | 2G | C. Frei |
227-0946-00L | Molecular Imaging - Basic Principles and Biomedical Applications | W | 3 KP | 2V + 1A | D. Razansky |
227-0948-00L | Magnetic Resonance Imaging in Medicine | W | 4 KP | 3G | S. Kozerke,
M. Weiger Senften |
376-1178-00L | Human Factors II | W | 3 KP | 2V | M. Menozzi Jäckli,
R. Huang,
M. Siegrist |
376-1217-00L | Rehabilitation Engineering I: Motor Functions | W | 4 KP | 2V + 1U | S. Raspopovic,
M. Xiloyannis |
376-1308-00L | Development Strategies for Medical Implants Maximale Teilnehmerzahl: 25 bis 30. Die Einschreibungen werden nach chronologischem Eingang berücksichtigt. | W | 3 KP | 2V + 1U | J. Mayer-Spetzler |
376-1392-00L | Mechanobiology: Implications for Development, Regeneration and Tissue Engineering | W | 3 KP | 2G | G. Shivashankar |
376-1397-00L | Orthopaedic Biomechanics Number of participants limited to 48. | W | 3 KP | 2G | R. Müller,
J. Schwiedrzik |
376-1614-00L | Principles in Tissue Engineering | W | 3 KP | 2V | K. Maniura,
M. Rottmar,
M. Zenobi-Wong |
376-1721-00L | Bone Biology and Consequences for Human Health | W | 2 KP | 2V | G. A. Kuhn,
J. Goldhahn,
E. Wehrle |
376-1984-00L | Lasers in Medicine Findet dieses Semester nicht statt. | W | 3 KP | 3G | |
|
Design, Computation, Product Development & Manufacturing
Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. |
Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
---|
151-0548-00L | Manufacturing of Polymer Composites Number of participants limited to 32. | W | 6 KP | 3G + 2P | P. Ermanni |
151-3202-00L | Product Development and Engineering Design Number of participants limited to 60. | W | 4 KP | 2G | K. Shea,
T. Stankovic |
151-3204-00L | Coaching Innovations-Projekte | W | 2 KP | 2V | R. P. Haas |
151-3210-00L | Structural Optimization Number of participants limited to 45. | W | 4 KP | 4G | T. Stankovic |
263-5806-00L | Computational Models of Motion | W | 8 KP | 2V + 2U + 3A | S. Coros,
M. Bächer,
B. Thomaszewski |
|
Multidisziplinfächer
Den Studierenden steht das gesamte Vorlesungsverzeichnis der ETH Zürich, der ETH Lausanne sowie der Universitäten Zürich ( Link) und St. Gallen zur individuellen Auswahl offen. |
»
Gesamtes Lehrangebot der ETH Zürich |
|
Studienarbeit |
Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
---|
151-1002-00L | Semester Project Mechanical Engineering Only for Mechanical Engineering MSc.
The subject of the Semester Project and the choice of the supervisor (ETH-professor) are to be approved in advance by the tutor. | O | 8 KP | 17A | Professor/innen |
|
Industrie-Praxis |
Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
---|
151-1090-00L | Industrial InternshipAccess to the company list and request for recognition under Link. No registration required via myStudies. | O | 8 KP | | externe Veranstalter |
|
GESS Wissenschaft im Kontext |
»
siehe Studiengang Wissenschaft im Kontext: Typ A: Förderung allgemeiner Reflexionsfähigkeiten |
»
Recommended Science in Perspective (Type B) for D-MAVT |
»
siehe Studiengang Wissenschaft im Kontext: Sprachkurse ETH/UZH |
|
Master-Arbeit |
Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
---|
151-1001-00L | Master's Thesis Mechanical Engineering Students who fulfill the following criteria are allowed to begin with their Master's Thesis: a. successful completion of the bachelor program; b. fulfilling of any additional requirements necessary to gain admission to the master programme; c. successful completion of the semester project and industrial internship; d. achievement of 28 ECTS in the category "Core Courses".
The Master's Thesis must be approved in advance by the tutor and is supervised by a professor of ETH Zurich. To choose a titular professor as a supervisor, please contact the D-MAVT Student Administration. | O | 30 KP | 64D | Professor/innen |
|
Auflagen-Lerneinheiten
Das untenstehende Lehrangebot gilt nur für MSc-Studierende mit Zulassungsauflagen. |
Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
---|
406-0173-AAL | Linear Algebra I and II Belegung ist NUR erlaubt für MSc Studierende, die diese Lerneinheit als Auflagenfach verfügt haben.
Alle anderen Studierenden (u.a. auch Mobilitätsstudierende, Doktorierende) können diese Lerneinheit NICHT belegen. | E- | 6 KP | 13R | N. Hungerbühler |
406-0353-AAL | Analysis III Belegung ist NUR erlaubt für MSc Studierende, die diese Lerneinheit als Auflagenfach verfügt haben.
Alle anderen Studierenden (u.a. auch Mobilitätsstudierende, Doktorierende) können diese Lerneinheit NICHT belegen. | E- | 4 KP | 9R | F. Da Lio |