Suchergebnis: Lerneinheiten im Frühjahrssemester 2020
Maschineningenieurwissenschaften Master | ||||||
Kernfächer | ||||||
Energy, Flows and Processes Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. | ||||||
Nummer | Titel | Typ | ECTS | Umfang | Dozierende | |
---|---|---|---|---|---|---|
151-0106-00L | Orbital Dynamics | W | 4 KP | 3G | A. A. Kubik | |
151-0110-00L | Compressible Flows | W | 4 KP | 2V + 1U | T. Rösgen | |
151-0116-10L | High Performance Computing for Science and Engineering (HPCSE) for Engineers II | W | 4 KP | 4G | P. Koumoutsakos, S. M. Martin | |
151-0118-00L | Applied Machine Learning for Engineers Number of participants limited to 40. | W | 4 KP | 3G | B. Vennemann | |
151-0156-00L | Safety of Nuclear Power Plants | W | 4 KP | 2V + 1U | H.‑M. Prasser, V. Dang, L. Podofillini | |
151-0160-00L | Nuclear Energy Systems | W | 4 KP | 2V + 1U | H.‑M. Prasser, P. Burgherr, I. Günther-Leopold, W. Hummel, T. Kämpfer, T. Kober, X. Zhang | |
151-0166-00L | Physics of Nuclear Reactor II | W | 4 KP | 3G | S. Pelloni, K. Mikityuk, A. Pautz | |
151-0212-00L | Advanced CFD Methods | W | 4 KP | 2V + 1U | P. Jenny | |
151-0224-00L | Fuel Synthesis Engineering | W | 4 KP | 3V | B. Bulfin | |
151-0226-00L | Energy and Transport Futures | W | 4 KP | 3G | K. Boulouchos, P. J. de Haan van der Weg, G. Georges | |
151-0232-00L | Engineering Acoustics II | W | 4 KP | 3G | N. Noiray, S. M. Schoenwald, B. Van Damme, A. Zemp | |
151-0252-00L | Gasturbinen: Prozesse und Verbrennungssysteme | W | 4 KP | 2V + 1U | P. Jansohn | |
151-0254-00L | Environmental Aspects of IC-Engines | W | 4 KP | 2V + 1U | K. Boulouchos, C. Barro, P. Dimopoulos Eggenschwiler, Y. Wright | |
151-0280-00L | Advanced Techniques for the Risk Analysis of Technical Systems | W | 4 KP | 2V + 1U | G. Sansavini | |
151-0530-00L | Nonlinear Dynamics and Chaos II | W | 4 KP | 4G | G. Haller | |
151-0928-00L | CO2 Capture and Storage and the Industry of Carbon-Based Resources | W | 4 KP | 3G | M. Mazzotti, L. Bretschger, N. Gruber, C. Müller, M. Repmann, T. Schmidt, D. Sutter | |
151-0944-00L | Case Studies on Earth's Natural Resources Findet dieses Semester nicht statt. | W | 3 KP | 3S | M. Mazzotti | |
151-0946-00L | Macromolecular Engineering: Networks and Gels | W | 4 KP | 4G | M. Tibbitt | |
151-0980-00L | Biofluiddynamics | W | 4 KP | 2V + 1U | D. Obrist, P. Jenny | |
151-1115-00L | Ausgewählte Kapitel der Flugtechnik | W | 4 KP | 3G | J. Wildi | |
151-1906-00L | Multiphase Flow | W | 4 KP | 3G | H.‑M. Prasser | |
151-2016-00L | Radiation Imaging for Industrial Applications | W | 4 KP | 2V + 1U | H.‑M. Prasser, R. Adams | |
151-2017-00L | Nuclear Fuels and Materials | W | 4 KP | 3G | M. A. Pouchon, P. J.‑P. Spätig | |
151-0228-00L | Management of Air Transport (Aviation II) | W | 4 KP | 3G | P. Wild | |
151-0230-00L | Plasma Science in Engineering | W | 4 KP | 2V + 1U | R. S. Abhari, A. Giovannini | |
227-0455-00L | Terahertz: Technology and Applications | W | 5 KP | 3G + 3A | K. Sankaran | |
252-0834-00L | Information Systems for Engineers Wird ab HS20 nur in Herbstsemester angeboten. | W | 4 KP | 2V + 1U | G. Fourny | |
Mechanics, Materials, Structures Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. | ||||||
Nummer | Titel | Typ | ECTS | Umfang | Dozierende | |
151-0116-10L | High Performance Computing for Science and Engineering (HPCSE) for Engineers II | W | 4 KP | 4G | P. Koumoutsakos, S. M. Martin | |
151-0232-00L | Engineering Acoustics II | W | 4 KP | 3G | N. Noiray, S. M. Schoenwald, B. Van Damme, A. Zemp | |
151-0304-00L | Dimensionieren II | W | 4 KP | 4G | K. Wegener | |
151-0306-00L | Visualization, Simulation and Interaction - Virtual Reality I | W | 4 KP | 4G | A. Kunz | |
151-0314-00L | Informationstechnologien im digitalen Produkt | W | 4 KP | 3G | E. Zwicker, R. Montau | |
151-0318-00L | Ecodesign - Umweltgerechte Produktgestaltung | W | 4 KP | 3G | R. Züst | |
151-0324-00L | GL zum Bemessen von Kunststoffbauteilen | W | 4 KP | 2V + 1U | G. P. Terrasi | |
151-0332-00L | Interdisciplinary Product Development: Definition, Realisation and Validation of Product Concepts Number of participants limited to: 5 (ETHZ) + 20 (ZHdK) To apply for the course please create a pdf of 2+ Pages describing yourself and your motivation for the course as well as one or more of your former development projects. Please add minimum one picture and your CV as well, send the pdf to Link. | W | 4 KP | 2G + 4A | M. Schütz | |
151-0366-00L | Aircraft Structures | W | 4 KP | 2V + 1U | P. Ermanni | |
151-0513-00L | Mechanics of Soft Materials and Tissues | W | 4 KP | 3G | A. E. Ehret | |
151-0515-00L | Continuum Mechanics 2 | W | 4 KP | 2V + 1U | E. Mazza, R. Hopf | |
151-0516-00L | Nicht-glatte Dynamik | W | 5 KP | 5G | C. Glocker | |
151-0518-00L | Computational Mechanics I: Intro to FEA | W | 4 KP | 4G | D. Kochmann | |
151-0522-00L | Case Studies in Computer Aided Engineering - Applied FEM | W | 4 KP | 3G | D. Valtorta | |
151-0528-00L | Theory of Phase Transitions | W | 4 KP | 3G | L. Guin, D. Kochmann | |
151-0530-00L | Nonlinear Dynamics and Chaos II | W | 4 KP | 4G | G. Haller | |
151-0534-00L | Advanced Dynamics | W | 4 KP | 3V + 1U | P. Tiso | |
151-0540-00L | Experimentelle Mechanik Findet dieses Semester nicht statt. | W | 4 KP | 2V + 1U | J. Dual | |
151-0544-00L | Metal Additive Manufacturing - Mechanical Integrity and Numerical Analysis | W | 4 KP | 3G | E. Hosseini | |
151-0548-00L | Manufacturing of Polymer Composites Number of participants limited to 32. To apply for the course, please send a document in pdf format of max. 1-2 pages to Link with the following content: - Motivation(s) for attending the course - Specialization of the studies (related subjects, ETH tutor) | W | 6 KP | 3G + 2P | P. Ermanni | |
151-0566-00L | Recursive Estimation | W | 4 KP | 2V + 1U | R. D'Andrea | |
151-0708-00L | Fertigungstechnik II | W | 4 KP | 2V + 1U | K. Wegener, M. Schmid, S. Weikert | |
151-0718-00L | Qualitätssicherung - Werkstückmesstechnik | W | 4 KP | 2V + 2U | A. Günther | |
151-0720-00L | Produktionsmaschinen I | W | 4 KP | 4G | K. Wegener, S. Weikert | |
151-0802-00L | Automation Technology | W | 4 KP | 2V + 1U | H. Wild, K. Wegener | |
151-0834-00L | Umformtechnik II - Numerische Simulationsverfahren | W | 4 KP | 2V + 2U | P. Hora | |
151-0836-00L | Methoden der virtuellen Prozessauslegung umformtechnischer Systeme | W | 5 KP | 2V + 2U | P. Hora | |
151-0840-00L | Principles of FEM-Based Optimization and Robustness Analysis | W | 5 KP | 2V + 2U | B. Berisha, P. Hora, N. Manopulo | |
151-1224-00L | Ölhydraulik und Pneumatik | W | 4 KP | 2V + 2U | J. Lodewyks | |
151-1550-00L | Seminar in Mechanik | E- | 0 KP | 2S | E. Mazza, J. Dual, G. Haller | |
252-0220-00L | Introduction to Machine Learning Limited number of participants. Preference is given to students in programmes in which the course is being offered. All other students will be waitlisted. Please do not contact Prof. Krause for any questions in this regard. If necessary, please contact Link | W | 8 KP | 4V + 2U + 1A | A. Krause | |
252-0834-00L | Information Systems for Engineers Wird ab HS20 nur in Herbstsemester angeboten. | W | 4 KP | 2V + 1U | G. Fourny | |
363-0448-00L | Global Operations Strategy Findet dieses Semester nicht statt. | W | 3 KP | 3G | T. Netland | |
363-0768-00L | Ringvorlesung ETH und UZH: Logistik-Management | W | 3 KP | 2V | T. Netland, H. Dietl | |
376-1178-00L | Human Factors II | W | 3 KP | 2V | M. Menozzi Jäckli, R. Huang, M. Siegrist | |
376-1217-00L | Rehabilitation Engineering I: Motor Functions | W | 4 KP | 2V + 1U | R. Riener, E. Wilhelm | |
Robotics, Systems and Control Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. | ||||||
Nummer | Titel | Typ | ECTS | Umfang | Dozierende | |
151-0310-00L | Model Predictive Engine Control Number of participants limited to 55. | W | 4 KP | 2V + 1U | T. Albin Rajasingham | |
151-0314-00L | Informationstechnologien im digitalen Produkt | W | 4 KP | 3G | E. Zwicker, R. Montau | |
151-0318-00L | Ecodesign - Umweltgerechte Produktgestaltung | W | 4 KP | 3G | R. Züst | |
151-0530-00L | Nonlinear Dynamics and Chaos II | W | 4 KP | 4G | G. Haller | |
151-0534-00L | Advanced Dynamics | W | 4 KP | 3V + 1U | P. Tiso | |
151-0566-00L | Recursive Estimation | W | 4 KP | 2V + 1U | R. D'Andrea | |
151-0630-00L | Nanorobotics | W | 4 KP | 2V + 1U | S. Pané Vidal | |
151-0634-00L | Perception and Learning for Robotics Number of participants limited to: 30 To apply for the course please create a CV in pdf of max. 2 pages, including your machine learning and/or robotics experience. Please send the pdf to Link for approval. | W | 4 KP | 9A | C. D. Cadena Lerma, J. J. Chung | |
151-0641-00L | Introduction to Robotics and Mechatronics Number of participants limited to 60. Enrollment is only valid through registration on the MSRL website (Link). Registrations per e-mail is no longer accepted! | W | 4 KP | 2V + 2U | B. Nelson, N. Shamsudhin | |
151-0660-00L | Model Predictive Control | W | 4 KP | 2V + 1U | M. Zeilinger | |
151-0854-00L | Autonomous Mobile Robots | W | 5 KP | 4G | R. Siegwart, M. Chli, N. Lawrance | |
151-1115-00L | Ausgewählte Kapitel der Flugtechnik | W | 4 KP | 3G | J. Wildi | |
151-0116-10L | High Performance Computing for Science and Engineering (HPCSE) for Engineers II | W | 4 KP | 4G | P. Koumoutsakos, S. M. Martin | |
101-0521-10L | Machine Learning for Predictive Maintenance Applications The number of participants in the course is limited to 25 students. Students interested in attending the lecture are requested to upload their transcript and a short motivation responding the following two questions (max. 200 words): -How does this course fit to the other courses you have attended so far? -How does the course support you in achieving your goal? The following link can be used to upload the documents. Link | W | 8 KP | 4G | O. Fink | |
103-0848-00L | Industrial Metrology and Machine Vision Number of participants limited to 30. | W | 4 KP | 3G | K. Schindler, A. Wieser | |
227-0216-00L | Control Systems II | W | 6 KP | 4G | R. Smith | |
227-0224-00L | Stochastic Systems | W | 4 KP | 2V + 1U | F. Herzog | |
227-0690-11L | Advanced Topics in Control (Spring 2020) New topics are introduced every year. | W | 4 KP | 2V + 2U | G. Banjac | |
252-0220-00L | Introduction to Machine Learning Limited number of participants. Preference is given to students in programmes in which the course is being offered. All other students will be waitlisted. Please do not contact Prof. Krause for any questions in this regard. If necessary, please contact Link | W | 8 KP | 4V + 2U + 1A | A. Krause | |
252-0526-00L | Statistical Learning Theory | W | 7 KP | 3V + 2U + 1A | J. M. Buhmann, C. Cotrini Jimenez | |
252-0579-00L | 3D Vision | W | 5 KP | 3G + 1A | M. Pollefeys, V. Larsson | |
252-0834-00L | Information Systems for Engineers Wird ab HS20 nur in Herbstsemester angeboten. | W | 4 KP | 2V + 1U | G. Fourny | |
263-5806-00L | Computational Models of Motion for Character Animation and Robotics | W | 6 KP | 2V + 2U + 1A | S. Coros, M. Bächer, B. Thomaszewski | |
376-1217-00L | Rehabilitation Engineering I: Motor Functions | W | 4 KP | 2V + 1U | R. Riener, E. Wilhelm | |
376-1308-00L | Development Strategies for Medical Implants Maximale Teilnehmerzahl: 25 bis 30. Die Einschreibungen werden nach chronologischem Eingang berücksichtigt. | W | 3 KP | 2V + 1U | J. Mayer-Spetzler, M. Rubert | |
Micro & Nanosystems Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. | ||||||
Nummer | Titel | Typ | ECTS | Umfang | Dozierende | |
151-0060-00L | Thermodynamics and Transport Phenomena in Nanotechnology | W | 4 KP | 2V + 2U | T. Schutzius | |
151-0116-10L | High Performance Computing for Science and Engineering (HPCSE) for Engineers II | W | 4 KP | 4G | P. Koumoutsakos, S. M. Martin | |
151-0172-00L | Microsystems II: Devices and Applications | W | 6 KP | 3V + 3U | C. Hierold, C. I. Roman | |
151-0237-00L | Advanced Optical Methods in Nanotechnology | W | 4 KP | 2V + 1U | H. Eghlidi | |
151-0530-00L | Nonlinear Dynamics and Chaos II | W | 4 KP | 4G | G. Haller | |
151-0620-00L | Embedded MEMS Lab Number of participants limited to 20. | W | 5 KP | 3P | C. Hierold, S. Blunier, M. Haluska | |
151-0622-00L | Measuring on the Nanometer Scale | W | 2 KP | 2G | A. Stemmer | |
151-0628-00L | Scanning Probe Microscopy Lab Limited number of participants. Please address your application to Andreas Stemmer (Link). Simultaneous enrolment in 151-0622-00L Measuring on the Nanometer Scale is required. | W | 2 KP | 2P | A. Stemmer | |
151-0630-00L | Nanorobotics | W | 4 KP | 2V + 1U | S. Pané Vidal | |
151-0642-00L | Seminar on Micro and Nanosystems | E- | 0 KP | 1S | C. Hierold | |
151-0931-00L | Seminar on Particle Technology | E- | 0 KP | 3S | S. E. Pratsinis | |
227-0455-00L | Terahertz: Technology and Applications | W | 5 KP | 3G + 3A | K. Sankaran | |
227-0662-00L | Organic and Nanostructured Optics and Electronics (Course) Findet dieses Semester nicht statt. | W | 3 KP | 2G | V. Wood | |
227-0662-10L | Organic and Nanostructured Optics and Electronics (Project) Findet dieses Semester nicht statt. | W | 3 KP | 2A | V. Wood | |
252-0834-00L | Information Systems for Engineers Wird ab HS20 nur in Herbstsemester angeboten. | W | 4 KP | 2V + 1U | G. Fourny | |
Bioengineering Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. | ||||||
Nummer | Titel | Typ | ECTS | Umfang | Dozierende | |
151-0060-00L | Thermodynamics and Transport Phenomena in Nanotechnology | W | 4 KP | 2V + 2U | T. Schutzius | |
151-0116-10L | High Performance Computing for Science and Engineering (HPCSE) for Engineers II | W | 4 KP | 4G | P. Koumoutsakos, S. M. Martin | |
151-0237-00L | Advanced Optical Methods in Nanotechnology | W | 4 KP | 2V + 1U | H. Eghlidi | |
151-0306-00L | Visualization, Simulation and Interaction - Virtual Reality I | W | 4 KP | 4G | A. Kunz | |
151-0522-00L | Case Studies in Computer Aided Engineering - Applied FEM | W | 4 KP | 3G | D. Valtorta | |
151-0530-00L | Nonlinear Dynamics and Chaos II | W | 4 KP | 4G | G. Haller | |
151-0630-00L | Nanorobotics | W | 4 KP | 2V + 1U | S. Pané Vidal | |
151-0641-00L | Introduction to Robotics and Mechatronics Number of participants limited to 60. Enrollment is only valid through registration on the MSRL website (Link). Registrations per e-mail is no longer accepted! | W | 4 KP | 2V + 2U | B. Nelson, N. Shamsudhin | |
151-0946-00L | Macromolecular Engineering: Networks and Gels | W | 4 KP | 4G | M. Tibbitt | |
151-0980-00L | Biofluiddynamics | W | 4 KP | 2V + 1U | D. Obrist, P. Jenny | |
227-0384-00L | Ultrasound Fundamentals, Imaging, and Medical Applications Course is offered for the last time in Spring Semester 2020. | W | 4 KP | 3G | O. Göksel | |
227-0455-00L | Terahertz: Technology and Applications | W | 5 KP | 3G + 3A | K. Sankaran | |
227-0945-10L | Cell and Molecular Biology for Engineers II This course is part II of a two-semester course. Knowledge of part I is required. | W | 3 KP | 2G | C. Frei | |
227-0946-00L | Molecular Imaging - Basic Principles and Biomedical Applications | W | 2 KP | 2V | M. Rudin | |
227-0948-00L | Magnetic Resonance Imaging in Medicine | W | 4 KP | 3G | S. Kozerke, M. Weiger Senften | |
252-0834-00L | Information Systems for Engineers Wird ab HS20 nur in Herbstsemester angeboten. | W | 4 KP | 2V + 1U | G. Fourny | |
376-1178-00L | Human Factors II | W | 3 KP | 2V | M. Menozzi Jäckli, R. Huang, M. Siegrist | |
376-1217-00L | Rehabilitation Engineering I: Motor Functions | W | 4 KP | 2V + 1U | R. Riener, E. Wilhelm | |
376-1308-00L | Development Strategies for Medical Implants Maximale Teilnehmerzahl: 25 bis 30. Die Einschreibungen werden nach chronologischem Eingang berücksichtigt. | W | 3 KP | 2V + 1U | J. Mayer-Spetzler, M. Rubert | |
376-1392-00L | Mechanobiology: Implications for Development, Regeneration and Tissue Engineering | W | 3 KP | 2G | A. Ferrari, G. Shivashankar, M. Zenobi-Wong | |
376-1397-00L | Orthopaedic Biomechanics Number of participants limited to 48. | W | 3 KP | 2G | R. Müller, P. Atkins, J. Schwiedrzik | |
376-1614-00L | Principles in Tissue Engineering | W | 3 KP | 2V | K. Maniura, M. Rottmar, M. Zenobi-Wong | |
376-1721-00L | Bone Biology and Consequences for Human Health | W | 2 KP | 2V | G. A. Kuhn, J. Goldhahn, E. Wehrle | |
376-1984-00L | Lasers in Medicine | W | 3 KP | 3G | M. Frenz | |
Design, Computation, Product Development & Manufacturing Die unter der Kategorie “Kernfächer” gelisteten Fächer sind empfohlen. Andere Kurse sind nicht ausgeschlossen, benötigen jedoch die Zustimmung des Tutors/der Tutorin. | ||||||
Nummer | Titel | Typ | ECTS | Umfang | Dozierende | |
151-0548-00L | Manufacturing of Polymer Composites Number of participants limited to 32. To apply for the course, please send a document in pdf format of max. 1-2 pages to Link with the following content: - Motivation(s) for attending the course - Specialization of the studies (related subjects, ETH tutor) | W | 6 KP | 3G + 2P | P. Ermanni | |
151-3202-00L | Product Development and Engineering Design Findet dieses Semester nicht statt. Number of participants limited to 60. | W | 4 KP | 2G | K. Shea | |
151-3204-00L | Coaching Innovations-Projekte | W | 2 KP | 2V | R. P. Haas | |
151-3210-00L | Structural Optimization Number of participants limited to 45. | W | 4 KP | 4G | T. Stankovic | |
252-0834-00L | Information Systems for Engineers Wird ab HS20 nur in Herbstsemester angeboten. | W | 4 KP | 2V + 1U | G. Fourny | |
263-5806-00L | Computational Models of Motion for Character Animation and Robotics | W | 6 KP | 2V + 2U + 1A | S. Coros, M. Bächer, B. Thomaszewski | |
Multidisziplinfächer Den Studierenden steht das gesamte Vorlesungsverzeichnis der ETH Zürich, der ETH Lausanne sowie der Universitäten Zürich und St. Gallen zur individuellen Auswahl offen. | ||||||
» Gesamtes Lehrangebot der ETH Zürich | ||||||
Studienarbeit | ||||||
Nummer | Titel | Typ | ECTS | Umfang | Dozierende | |
151-1002-00L | Semester Project Mechanical Engineering Only for Mechanical Engineering MSc. The subject of the Semester Project and the choice of the supervisor (ETH-professor) are to be approved in advance by the tutor. | O | 8 KP | 17A | Professor/innen | |
Industrie-Praxis | ||||||
Nummer | Titel | Typ | ECTS | Umfang | Dozierende | |
151-1090-00L | Industrial Internship Access to the company list and request for recognition under Link. No registration required via myStudies. | O | 8 KP | externe Veranstalter | ||
GESS Wissenschaft im Kontext | ||||||
» siehe Studiengang Wissenschaft im Kontext: Typ A: Förderung allgemeiner Reflexionsfähigkeiten | ||||||
» Recommended Science in Perspective (Type B) for D-MAVT | ||||||
» siehe Studiengang Wissenschaft im Kontext: Sprachkurse ETH/UZH | ||||||
Master-Arbeit | ||||||
Nummer | Titel | Typ | ECTS | Umfang | Dozierende | |
151-1001-00L | Master's Thesis Mechanical Engineering Students who fulfill the following criteria are allowed to begin with their Master's Thesis: a. successful completion of the bachelor program; b. fulfilling of any additional requirements necessary to gain admission to the master programme; c. successful completion of the semester project and industrial internship; d. achievement of 28 ECTS in the category "Core Courses". The Master's Thesis must be approved in advance by the tutor and is supervised by a professor of ETH Zurich. To choose a titular professor as a supervisor, please contact the D-MAVT Student Administration. | O | 30 KP | 64D | Professor/innen | |
Auflagen-Lerneinheiten Das untenstehende Lehrangebot gilt nur für MSc-Studierende mit Zulassungsauflagen. | ||||||
Nummer | Titel | Typ | ECTS | Umfang | Dozierende | |
406-0173-AAL | Linear Algebra I and II Belegung ist NUR erlaubt für MSc Studierende, die diese Lerneinheit als Auflagenfach verfügt haben. Alle anderen Studierenden (u.a. auch Mobilitätsstudierende, Doktorierende) können diese Lerneinheit NICHT belegen. | E- | 6 KP | 13R | N. Hungerbühler | |
406-0353-AAL | Analysis III Belegung ist NUR erlaubt für MSc Studierende, die diese Lerneinheit als Auflagenfach verfügt haben. Alle anderen Studierenden (u.a. auch Mobilitätsstudierende, Doktorierende) können diese Lerneinheit NICHT belegen. | E- | 4 KP | 9R | F. Da Lio |