Search result: Courses in Autumn Semester 2017
Mechanical Engineering Bachelor | |||||||||||||||||||||||||||||||||
5. Semester | |||||||||||||||||||||||||||||||||
Compulsory Courses Examination Block 3 | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
151-0261-00L | Thermodynamics III | O | 3 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0261-00 V | Thermodynamics III | 2 hrs |
| R. S. Abhari, A. Haselbacher | |||||||||||||||||||||||||||||
151-0261-00 U | Thermodynamics III | 1 hrs |
| R. S. Abhari, A. Haselbacher | |||||||||||||||||||||||||||||
151-0103-00L | Fluid Dynamics II | O | 3 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0103-00 V | Fluiddynamik II | 2 hrs |
| P. Jenny | |||||||||||||||||||||||||||||
151-0103-00 U | Fluiddynamik II Die Übungen beginnen in der 3. Semesterwoche. | 1 hrs |
| P. Jenny | |||||||||||||||||||||||||||||
Electives | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0573-00L | System Modeling | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0573-00 V | System Modeling | 2 hrs |
| G. Ducard | |||||||||||||||||||||||||||||
151-0573-00 U | System Modeling Di 13-14, Di 16-17 oder Do 8-9 gemäss Gruppeneinteilung. Die Studierenden müssen sich selbst für eine der entsprechenden Übungsgruppen einschreiben (Link). Die Übungen finden ab der zweiten Semesterwoche statt. | 2 hrs |
| G. Ducard | |||||||||||||||||||||||||||||
151-0575-01L | Signals and Systems | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0575-01 V | Signals and Systems The lecture will start in the 2nd week of the Semester. | 2 hrs |
| R. D'Andrea | |||||||||||||||||||||||||||||
151-0575-01 U | Signals and Systems The exercise will start in the 3rd week of the Semester. | 2 hrs |
| R. D'Andrea | |||||||||||||||||||||||||||||
151-0917-00L | Mass Transfer | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0917-00 V | Mass Transfer | 2 hrs |
| K. Wegner, M. Eggersdorfer | |||||||||||||||||||||||||||||
151-0917-00 U | Mass Transfer | 2 hrs |
| R. Büchel | |||||||||||||||||||||||||||||
151-0973-00L | Fundamentals in Process Engineering | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0973-00 V | Einführung in die Verfahrenstechnik | 2 hrs |
| P. Rudolf von Rohr, C. Müller | |||||||||||||||||||||||||||||
151-0973-00 U | Einführung in die Verfahrenstechnik | 2 hrs |
| P. Rudolf von Rohr, C. Müller | |||||||||||||||||||||||||||||
151-3207-00L | Lightweight | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-3207-00 V | Leichtbau Die Lehrveranstaltung beginnt in der zweiten Semesterwoche. | 2 hrs |
| P. Ermanni, G. Molinari | |||||||||||||||||||||||||||||
151-3207-00 U | Leichtbau Die Lehrveranstaltung beginnt in der zweiten Semesterwoche. | 2 hrs |
| P. Ermanni, G. Molinari | |||||||||||||||||||||||||||||
227-0076-00L | Electrical Engineering II | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
227-0076-00 V | Elektrotechnik II | 2 hrs |
| J. Biela | |||||||||||||||||||||||||||||
227-0076-00 U | Elektrotechnik II | 2 hrs |
| J. Biela | |||||||||||||||||||||||||||||
363-0511-00L | Managerial Economics Not for MSc students belonging to D-MTEC! | W | 4 credits | 3V | |||||||||||||||||||||||||||||
363-0511-00 V | Managerial Economics Vorlesung findet jeweils am Mittwoch von 8:00-10:00 Uhr statt. Problem Session findet jeweils am Dienstag zwischen 17 und 18 Uhr statt. In den ersten fünf Vorlesungswochen finden keine Übungen statt. | 3 hrs |
| S. Rausch, V. Hoffmann | |||||||||||||||||||||||||||||
401-0603-00L | Stochastics (Probability and Statistics) | W | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
401-0603-00 V | Stochastik | 2 hrs |
| M. Schweizer | |||||||||||||||||||||||||||||
401-0603-00 U | Stochastik Mo 17-18 oder Di 12-13 gemäss Gruppeneinteilung (Mo 17-18 für Studiengang Materialwissenschaft) | 1 hrs | M. Schweizer | ||||||||||||||||||||||||||||||
401-0435-00L | Computational Methods for Engineering Applications II | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
401-0435-00 V | Computational Methods for Engineering Applications II Lecture starts in the second week of the semester. | 2 hrs |
| S. Mishra | |||||||||||||||||||||||||||||
401-0435-00 U | Computational Methods for Engineering Applications II Exercises start in the second week of the semester. | 2 hrs |
| S. Mishra | |||||||||||||||||||||||||||||
Focus Project | |||||||||||||||||||||||||||||||||
Focus Projects in Energy, Flows and Processes | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0076-10L | Swissloop This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0076-10 A | Swissloop | 210s hrs | J. Carmeliet | ||||||||||||||||||||||||||||||
Focus Projects in Mechatronics | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0073-10L | Indoor Mobility Robot This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0073-10 A | Indoor Mobility Robot | 210s hrs |
| R. Siegwart | |||||||||||||||||||||||||||||
151-0073-20L | Robotic Elephant Trunk This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0073-20 A | Robotic Elephant Trunk | 210s hrs | M. Hutter, R. Siegwart | ||||||||||||||||||||||||||||||
151-0073-40L | Space Toat This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0073-40 A | Space Toat | 210s hrs | by appt. | M. Hutter | |||||||||||||||||||||||||||||
Focus Projects in Manufacturing | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0075-10L | iTruck This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0075-10 A | iTruck Does not take place this semester. | 210s hrs | by appt. | K. Wegener | |||||||||||||||||||||||||||||
151-0075-20L | Formula Student Electric - Chassis This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0075-20 A | Formula Student Electric - Chassis | 210s hrs | by appt. | P. Hora | |||||||||||||||||||||||||||||
151-0075-30L | iRoadster This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0075-30 A | iRoadster | 210s hrs | by appt. | K. Wegener | |||||||||||||||||||||||||||||
151-0075-40L | Formula Student Electric - Drivetrain This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0075-40 A | Formula Student Electric - Antriebsstrang | 210s hrs |
| P. Hora | |||||||||||||||||||||||||||||
151-0075-50L | Multispeed ESC This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0075-50 A | Multispeed ESC | 210s hrs | by appt. | K. Wegener | |||||||||||||||||||||||||||||
151-0075-70L | ETHEC Electronics and Control This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0075-70 A | ETHEC Electronics and Control | 210s hrs | by appt. | K. Wegener | |||||||||||||||||||||||||||||
151-0075-80L | ETHEC Drive Train This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0075-80 A | ETHEC Drive Train | 210s hrs | by appt. | K. Wegener | |||||||||||||||||||||||||||||
Focus Projects in Design, Mechanics and Materials | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0079-10L | Carbon Factory This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0079-10 A | Carbon Factory | 210s hrs | by appt. | P. Ermanni | |||||||||||||||||||||||||||||
151-0079-20L | Motostudent This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0079-20 A | Motostudent | 210s hrs | P. Ermanni | ||||||||||||||||||||||||||||||
151-0079-30L | Airborne Wind Energy System 2 This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0079-30 A | Airborne Wind Energy System 2 | 210s hrs | by appt. | P. Ermanni | |||||||||||||||||||||||||||||
151-0079-40L | Cardiovascular Interventions Simulator for Surgents This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | |||||||||||||||||||||||||||||
151-0079-40 A | Cardiovascular Interventions Simulator for Surgents | 210s hrs | by appt. | M. Meboldt | |||||||||||||||||||||||||||||
Courses Eligible for Focus Projects | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0141-00L | Leadership Number of participants limited to 25. Only students for focus projects or doctoral students. | W | 1 credit | 2G | |||||||||||||||||||||||||||||
151-0141-00 G | Leadership
Blockkurs, 3 Tage (zwei am Start und einen nach Semesterende) im Gruppenraum (organisiert IWF im Technopark), interaktiv | 30s hrs |
| A. Halbleib | |||||||||||||||||||||||||||||
151-0761-00L | Practice Course to Focus Projects on Product Development Only students for focus projects. 2 up to 3 students per focus project. | W | 3 credits | 3G | |||||||||||||||||||||||||||||
151-0761-00 G | Praxiskurs zu Fokusprojekten mit Schwerpunkt Produktentwicklung Die genauen Themen werden während der Veranstaltung mitgeteilt. Einzelne Themen wie Sicherheit, Öffentlichkeitsarbeit, Verträge und Patente sind THemen, welche alle Fokusteams besuchen und kennen müssen, auch wenn dieser Kurs nicht belegt wird. | 40s hrs |
| R. P. Haas, C. R. Dietzsch, I. Goller, C. Schorno | |||||||||||||||||||||||||||||
151-0763-00L | Practice Course to Focus Projects on CAD and CAE Based on Siemens NX - Pro Fokus-Team sind maximal drei Studierende zugelassen. Falls ein Team mehr als drei Teilnehmer anmelden möchte, muss dies von uns bewilligt werden. - Es ist zwingend erforderlich, dass die Teilnehmenden im Rahmen Ihres Fokus-Projektes CAD, CAE optional auch PLM als Tools selbst im Rahmen des Projektes aktiv einsetzen werden. - Bei Unsicherheiten ob diese Bedingungen erfüllt werden können, sollen Sie vor der Anmeldung bitte uns kontaktieren. | W | 3 credits | 3G | |||||||||||||||||||||||||||||
151-0763-00 G | Praxiskurs zu Fokusprojekten mit Schwerpunkt CAD und CAE mit Siemens NX Definitive Termine werden zu Beginn des Kurses bekannt gegeben; Weitere Informationen über Aufteilung der Gruppen für die Übung erfolgen durch die Dozierenden. Der Kurs beginnt in der zweiten Semesterwoche. Die teilnehmenden Studierenden müssen sich im Rahmen des Fokus-Projektes aktiv mit den Themen Konstruktion, CAD, Auslegung und Simulation beschäftigen. | 36s hrs |
| J.‑L. Emery, M. Schütz | |||||||||||||||||||||||||||||
Focus Specialization | |||||||||||||||||||||||||||||||||
Energy, Flows and Processes Focus Coordinator: Prof. Christoph Müller In order to achieve the required 20 credit points for the Focus Specialization Energy, Flows and Processes you need to choose at least 2 of the 4 compulsory courses (HS/FS) and at least 2 of the electives courses (HS/FS). One course could be selected among all the courses offered by D-MAVT (Bachelor and Masters). | |||||||||||||||||||||||||||||||||
Compulsory Courses | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0123-00L | Experimental Methods for Engineers | W+ | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0123-00 V | Experimental Methods for Engineers Lecture starts in the first week. | 2 hrs |
| T. Rösgen, K. Boulouchos, D. J. Norris, H.‑M. Prasser | |||||||||||||||||||||||||||||
151-0123-00 U | Experimental Methods for Engineers Exercises start in the first week. | 2 hrs |
| T. Rösgen, K. Boulouchos, D. J. Norris, H.‑M. Prasser | |||||||||||||||||||||||||||||
151-0293-00L | Combustion and Reactive Processes in Energy and Materials Technology | W+ | 4 credits | 2V + 1U + 2A | |||||||||||||||||||||||||||||
151-0293-00 V | Combustion and Reactive Processes in Energy and Materials Technology | 2 hrs |
| K. Boulouchos, F. Ernst, N. Noiray, Y. Wright | |||||||||||||||||||||||||||||
151-0293-00 U | Combustion and Reactive Processes in Energy and Materials Technology | 1 hrs |
| K. Boulouchos, F. Ernst, N. Noiray, Y. Wright | |||||||||||||||||||||||||||||
151-0293-00 A | Combustion and Reactive Processes in Energy and Materials Technology | 30s hrs | by appt. | K. Boulouchos, F. Ernst, N. Noiray, Y. Wright | |||||||||||||||||||||||||||||
Elective Courses | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0109-00L | Turbulent Flows | W | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0109-00 V | Turbulent Flows | 2 hrs |
| P. Jenny | |||||||||||||||||||||||||||||
151-0109-00 U | Turbulent Flows | 1 hrs |
| P. Jenny | |||||||||||||||||||||||||||||
151-0235-00L | Thermodynamics of Novel Energy Conversion Technologies Number of participants limited to 100. | W | 4 credits | 3G | |||||||||||||||||||||||||||||
151-0235-00 G | Thermodynamics of Novel Energy Conversion Technologies | 3 hrs |
| C. S. Sharma, G. Sansavini | |||||||||||||||||||||||||||||
151-0917-00L | Mass Transfer | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0917-00 V | Mass Transfer | 2 hrs |
| K. Wegner, M. Eggersdorfer | |||||||||||||||||||||||||||||
151-0917-00 U | Mass Transfer | 2 hrs |
| R. Büchel | |||||||||||||||||||||||||||||
151-0973-00L | Fundamentals in Process Engineering | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0973-00 V | Einführung in die Verfahrenstechnik | 2 hrs |
| P. Rudolf von Rohr, C. Müller | |||||||||||||||||||||||||||||
151-0973-00 U | Einführung in die Verfahrenstechnik | 2 hrs |
| P. Rudolf von Rohr, C. Müller | |||||||||||||||||||||||||||||
151-0135-00L | Additional Case for the Focus Specialization Exclusive for D-MAVT Bachelor's students in Focus Specialization. For enrollment, please contact the D-MAVT Student Administration. | W | 1 credit | 2A | |||||||||||||||||||||||||||||
151-0135-00 A | Ergänzendes Projekt für die Fokus-Vertiefung | 30s hrs | by appt. | Professors | |||||||||||||||||||||||||||||
Mechatronics Focus Coordinator: Prof. Bradley Nelson To achieve the 20 credits for Focus Specialization Mechatronics, 151-0640-00L Studies on Mechatronics is compulsory. | |||||||||||||||||||||||||||||||||
Compulsory Courses | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0640-00L | Studies on Mechatronics The following professors can be chosen and please contact the professor directly: M. Chli, R. D'Andrea, J. Dual, E. Frazzoli, R. Gassert, C. Hierold, M. Hutter, W. Karlen, J. Lygeros, M. Meboldt, B. Nelson, C. Onder, M. Pollefeys, D. Poulikakos, R. Riener, R.Y. Siegwart, L. Thiele, K. Wegener and M. Zeilinger This course is not available to incoming exchange students. | O | 5 credits | 11A | |||||||||||||||||||||||||||||
151-0640-00 A | Studies on Mechatronics
Registration and release of the issue after direct contact with the selected professor at the beginning of the semester. Language: English or German, depending on the lecturer. | 150s hrs | by appt. | Professors | |||||||||||||||||||||||||||||
Elective Courses | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0509-00L | Microscale Acoustofluidics Number of participants limited to 30. | W | 4 credits | 3G | |||||||||||||||||||||||||||||
151-0509-00 G | Microscale Acoustofluidics | 3 hrs |
| J. Dual | |||||||||||||||||||||||||||||
151-0575-01L | Signals and Systems | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0575-01 V | Signals and Systems The lecture will start in the 2nd week of the Semester. | 2 hrs |
| R. D'Andrea | |||||||||||||||||||||||||||||
151-0575-01 U | Signals and Systems The exercise will start in the 3rd week of the Semester. | 2 hrs |
| R. D'Andrea | |||||||||||||||||||||||||||||
151-0604-00L | Microrobotics | W | 4 credits | 3G | |||||||||||||||||||||||||||||
151-0604-00 G | Microrobotics | 3 hrs |
| B. Nelson | |||||||||||||||||||||||||||||
151-0621-00L | Microsystems I: Process Technology and Integration | W | 6 credits | 3V + 3U | |||||||||||||||||||||||||||||
151-0621-00 V | Microsystems I: Process Technology and Integration The course starts in the second week of the semester. | 3 hrs |
| C. Hierold, M. Haluska | |||||||||||||||||||||||||||||
151-0621-00 U | Microsystems I: Process Technology and Integration The course starts in the 3rd week of the Semester. | 3 hrs |
| M. Haluska | |||||||||||||||||||||||||||||
227-0113-00L | Power Electronics | W | 6 credits | 4G | |||||||||||||||||||||||||||||
227-0113-00 G | Leistungselektronik | 4 hrs |
| J. W. Kolar | |||||||||||||||||||||||||||||
227-0517-00L | Electrical Drive Systems II | W | 6 credits | 4G | |||||||||||||||||||||||||||||
227-0517-00 G | Electrical Drive Systems II | 4 hrs |
| P. Steimer, G. Scheuer, C. A. Stulz | |||||||||||||||||||||||||||||
376-1504-00L | Physical Human Robot Interaction (pHRI) Number of participants limited to 26. | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
376-1504-00 V | Physical Human-Robot Interaction (pHRI) | 2 hrs |
| R. Gassert, O. Lambercy | |||||||||||||||||||||||||||||
376-1504-00 U | Physical Human-Robot Interaction (pHRI) | 2 hrs |
| R. Gassert, O. Lambercy | |||||||||||||||||||||||||||||
151-0135-00L | Additional Case for the Focus Specialization Exclusive for D-MAVT Bachelor's students in Focus Specialization. For enrollment, please contact the D-MAVT Student Administration. | W | 1 credit | 2A | |||||||||||||||||||||||||||||
151-0135-00 A | Ergänzendes Projekt für die Fokus-Vertiefung | 30s hrs | by appt. | Professors | |||||||||||||||||||||||||||||
Microsystems and Nanoscale Engineering Focus Coordinator: Prof. Christofer Hierold | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0604-00L | Microrobotics | W | 4 credits | 3G | |||||||||||||||||||||||||||||
151-0604-00 G | Microrobotics | 3 hrs |
| B. Nelson | |||||||||||||||||||||||||||||
151-0619-00L | Introduction to Nanoscale Engineering This class is strictly only for BSc MAVT student. | W | 5 credits | 2V + 3P | |||||||||||||||||||||||||||||
151-0619-00 V | Introduction to Nanoscale Engineering | 2 hrs |
| V. Mavrantzas, A. Teleki Sotiriou | |||||||||||||||||||||||||||||
151-0619-00 P | Introduction to Nanoscale Engineering | 3 hrs |
| R. Büchel | |||||||||||||||||||||||||||||
151-0621-00L | Microsystems I: Process Technology and Integration | W+ | 6 credits | 3V + 3U | |||||||||||||||||||||||||||||
151-0621-00 V | Microsystems I: Process Technology and Integration The course starts in the second week of the semester. | 3 hrs |
| C. Hierold, M. Haluska | |||||||||||||||||||||||||||||
151-0621-00 U | Microsystems I: Process Technology and Integration The course starts in the 3rd week of the Semester. | 3 hrs |
| M. Haluska | |||||||||||||||||||||||||||||
151-0643-00L | Studies on Micro and Nano Systems Please contact one of the following professors directly: J. Dual, C. Hierold, B. Nelson, D. Norris, D. Poulikakos, S.E. Pratsinis and A. Stemmer This course is not available to incoming exchange students. | W+ | 5 credits | 11A | |||||||||||||||||||||||||||||
151-0643-00 A | Studies on Micro and Nano Systems | 150s hrs | by appt. | Professors | |||||||||||||||||||||||||||||
151-0911-00L | Introduction to Plasmonics | W | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0911-00 V | Introduction to Plasmonics | 2 hrs |
| D. J. Norris | |||||||||||||||||||||||||||||
151-0911-00 U | Introduction to Plasmonics | 1 hrs |
| D. J. Norris | |||||||||||||||||||||||||||||
151-0135-00L | Additional Case for the Focus Specialization Exclusive for D-MAVT Bachelor's students in Focus Specialization. For enrollment, please contact the D-MAVT Student Administration. | W | 1 credit | 2A | |||||||||||||||||||||||||||||
151-0135-00 A | Ergänzendes Projekt für die Fokus-Vertiefung | 30s hrs | by appt. | Professors | |||||||||||||||||||||||||||||
151-0237-00L | Advanced Optical Methods in Nanotechnology | W | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0237-00 V | Advanced Optical Methods in Nanotechnology | 2 hrs |
| H. Eghlidi | |||||||||||||||||||||||||||||
151-0237-00 U | Advanced Optical Methods in Nanotechnology | 1 hrs |
| H. Eghlidi | |||||||||||||||||||||||||||||
Manufacturing Science Focus Coordinator: Prof. Konrad Wegener To achieve the required 20 credit points for the focus specialization you need to pass all 3 compulsory courses (HS/FS). The other 8 credit points can be achieved from the elective courses. | |||||||||||||||||||||||||||||||||
Compulsory Courses | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0705-00L | Manufacturing I | O | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0705-00 V | Fertigungstechnik I | 2 hrs |
| K. Wegener, M. Boccadoro, F. Kuster | |||||||||||||||||||||||||||||
151-0705-00 U | Fertigungstechnik I Die Übungen beginnen in der zweiten Semesterwoche. | 2 hrs |
| K. Wegener, M. Boccadoro, F. Kuster | |||||||||||||||||||||||||||||
151-0733-00L | Forming Technology III - Forming Processes | O | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0733-00 V | Umformtechnik III - Umformtechnische Verfahren | 2 hrs |
| P. Hora | |||||||||||||||||||||||||||||
151-0733-00 U | Umformtechnik III - Umformtechnische Verfahren | 2 hrs |
| P. Hora | |||||||||||||||||||||||||||||
Elective Courses | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0573-00L | System Modeling | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0573-00 V | System Modeling | 2 hrs |
| G. Ducard | |||||||||||||||||||||||||||||
151-0573-00 U | System Modeling Di 13-14, Di 16-17 oder Do 8-9 gemäss Gruppeneinteilung. Die Studierenden müssen sich selbst für eine der entsprechenden Übungsgruppen einschreiben (Link). Die Übungen finden ab der zweiten Semesterwoche statt. | 2 hrs |
| G. Ducard | |||||||||||||||||||||||||||||
151-0703-00L | Operational Simulation of Production Lines | W+ | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0703-00 V | Betriebliche Simulation von Produktionsanlagen Die Lehrveranstasltung beginnt in der zweiten Semesterwoche. | 2 hrs |
| P. Acél | |||||||||||||||||||||||||||||
151-0703-00 U | Betriebliche Simulation von Produktionsanlagen Die Übungen finden alle zwei Wochen statt, jeweils für zwei Stunden. Die Übungen beginnen in der dritten Semesterwoche. | 1 hrs |
| P. Acél | |||||||||||||||||||||||||||||
151-0717-00L | Mechanical Production: Assembly, Joining and Coating Technology | W+ | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0717-00 V | Mechanische Produktion: Montieren, Fügen, Beschichten Die Lehrveranstasltung beginnt in der zweiten Semesterwoche. | 2 hrs |
| F. Kuster, V. H. Derflinger, F. Durand, P. Jousset | |||||||||||||||||||||||||||||
151-0717-00 U | Mechanische Produktion: Montieren, Fügen, Beschichten Die Übungsräume werden von den Dozierenden bekannt gegeben. | 1 hrs | F. Kuster, V. H. Derflinger, F. Durand, P. Jousset | ||||||||||||||||||||||||||||||
151-0719-00L | Quality of Machine Tools - Dynamics and Metrology at Micro and Submicro Level | W+ | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0719-00 V | Qualität von Werkzeugmaschinen - Dynamik, Mikro- und Submikromesstechnik | 2 hrs |
| A. Günther, F. Kuster | |||||||||||||||||||||||||||||
151-0719-00 U | Qualität von Werkzeugmaschinen - Dynamik, Mikro- und Submikromesstechnik Die Übungen finden in den Institutsräumen statt und werden von den Dozenten bekannt gegeben. | 1 hrs |
| A. Günther, F. Kuster | |||||||||||||||||||||||||||||
151-0723-00L | Manufacturing of Electronic Devices | W+ | 4 credits | 3G | |||||||||||||||||||||||||||||
151-0723-00 G | Produktion von elektrischen und elektronischen Komponenten Die Lehrveranstaltung beginnt in der zweiten Semesterwoche. | 3 hrs |
| A. Kunz, A. Guber, R.‑D. Moryson, F. Reichert | |||||||||||||||||||||||||||||
151-0731-00L | Forming Technology I - Basic Knowledge | W+ | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0731-00 V | Umformtechnik I - Grundlagen | 2 hrs |
| P. Hora | |||||||||||||||||||||||||||||
151-0731-00 U | Umformtechnik I - Grundlagen | 2 hrs |
| P. Hora | |||||||||||||||||||||||||||||
151-0833-00L | Principles of Nonlinear Finite-Element-Methods | W+ | 5 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0833-00 V | Principles of Nonlinear Finite-Element-Methods Wird auf Wunsch der Studenten auch in deutscher Sprache gehalten | 2 hrs |
| N. Manopulo, B. Berisha | |||||||||||||||||||||||||||||
151-0833-00 U | Principles of Nonlinear Finite-Element-Methods Wird auf Wunsch der Studenten auch in deutscher Sprache gehalten. Exercises start in the second week of the semester. | 2 hrs |
| N. Manopulo, B. Berisha | |||||||||||||||||||||||||||||
227-0113-00L | Power Electronics | W | 6 credits | 4G | |||||||||||||||||||||||||||||
227-0113-00 G | Leistungselektronik | 4 hrs |
| J. W. Kolar | |||||||||||||||||||||||||||||
Biomedical Engineering Focus Coordinator: Prof. Edoardo Mazza | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0255-00L | Energy Conversion and Transport in Biosystems | W | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0255-00 V | Energy Conversion and Transport in Biosystems | 2 hrs |
| A. Ferrari | |||||||||||||||||||||||||||||
151-0255-00 U | Energy Conversion and Transport in Biosystems | 1 hrs |
| A. Ferrari | |||||||||||||||||||||||||||||
151-0509-00L | Microscale Acoustofluidics Number of participants limited to 30. | W | 4 credits | 3G | |||||||||||||||||||||||||||||
151-0509-00 G | Microscale Acoustofluidics | 3 hrs |
| J. Dual | |||||||||||||||||||||||||||||
151-0524-00L | Continuum Mechanics I | W | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0524-00 V | Continuum Mechanics I | 2 hrs |
| E. Mazza | |||||||||||||||||||||||||||||
151-0524-00 U | Continuum Mechanics I Exercises start in the second week of the semester. | 1 hrs |
| E. Mazza | |||||||||||||||||||||||||||||
151-0604-00L | Microrobotics | W | 4 credits | 3G | |||||||||||||||||||||||||||||
151-0604-00 G | Microrobotics | 3 hrs |
| B. Nelson | |||||||||||||||||||||||||||||
151-0619-00L | Introduction to Nanoscale Engineering This class is strictly only for BSc MAVT student. | W | 5 credits | 2V + 3P | |||||||||||||||||||||||||||||
151-0619-00 V | Introduction to Nanoscale Engineering | 2 hrs |
| V. Mavrantzas, A. Teleki Sotiriou | |||||||||||||||||||||||||||||
151-0619-00 P | Introduction to Nanoscale Engineering | 3 hrs |
| R. Büchel | |||||||||||||||||||||||||||||
151-0621-00L | Microsystems I: Process Technology and Integration | W | 6 credits | 3V + 3U | |||||||||||||||||||||||||||||
151-0621-00 V | Microsystems I: Process Technology and Integration The course starts in the second week of the semester. | 3 hrs |
| C. Hierold, M. Haluska | |||||||||||||||||||||||||||||
151-0621-00 U | Microsystems I: Process Technology and Integration The course starts in the 3rd week of the Semester. | 3 hrs |
| M. Haluska | |||||||||||||||||||||||||||||
227-0385-10L | Biomedical Imaging | W | 6 credits | 5G | |||||||||||||||||||||||||||||
227-0385-10 G | Biomedical Imaging **together with University of Zurich** | 5 hrs |
| S. Kozerke, K. P. Prüssmann | |||||||||||||||||||||||||||||
227-0393-10L | Bioelectronics and Biosensors | W | 6 credits | 2V + 2U | |||||||||||||||||||||||||||||
227-0393-10 V | Bioelectronics and Biosensors | 2 hrs |
| J. Vörös, M. F. Yanik, T. Zambelli | |||||||||||||||||||||||||||||
227-0393-10 U | Bioelectronics and Biosensors | 2 hrs |
| M. F. Yanik, J. Vörös, T. Zambelli | |||||||||||||||||||||||||||||
376-0021-00L | Introduction to Biomedical Engineering I | W | 4 credits | 3G | |||||||||||||||||||||||||||||
376-0021-00 G | Introduction to Biomedical Engineering I Vorlesung: Di 13-15h Übungen: Di 15-16h Die Übungen finden ab 2. Semesterwoche statt! | 3 hrs |
| R. Müller, J. G. Snedeker, M. Zenobi-Wong | |||||||||||||||||||||||||||||
376-0203-00L | Movement and Sport Biomechanics | W | 4 credits | 3G | |||||||||||||||||||||||||||||
376-0203-00 G | Bewegungs- und Sportbiomechanik Vorlesung: Fr 13-15 Übungen: Fr 15-16 | 3 hrs |
| W. R. Taylor, R. List, S. Lorenzetti | |||||||||||||||||||||||||||||
376-1504-00L | Physical Human Robot Interaction (pHRI) Number of participants limited to 26. | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
376-1504-00 V | Physical Human-Robot Interaction (pHRI) | 2 hrs |
| R. Gassert, O. Lambercy | |||||||||||||||||||||||||||||
376-1504-00 U | Physical Human-Robot Interaction (pHRI) | 2 hrs |
| R. Gassert, O. Lambercy | |||||||||||||||||||||||||||||
376-1714-00L | Biocompatible Materials | W | 4 credits | 3G | |||||||||||||||||||||||||||||
376-1714-00 G | Biocompatible Materials Vorlesung 8-10h Uebungen/Gruppenarbeiten 10-11h | 3 hrs |
| K. Maniura, J. Möller, M. Zenobi-Wong | |||||||||||||||||||||||||||||
Management, Technology and Economics Focus Coordinators: Prof. Marko Köthenbürger D-MTEC and Dr. Jost Hamschmidt D-MTEC | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0733-00L | Forming Technology III - Forming Processes | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0733-00 V | Umformtechnik III - Umformtechnische Verfahren | 2 hrs |
| P. Hora | |||||||||||||||||||||||||||||
151-0733-00 U | Umformtechnik III - Umformtechnische Verfahren | 2 hrs |
| P. Hora | |||||||||||||||||||||||||||||
351-0778-00L | Discovering Management Entry level course in management for BSc, MSc and PHD students at all levels not belonging to D-MTEC. This course can be complemented with Discovering Management (Excercises) 351-0778-01. | W | 3 credits | 3G | |||||||||||||||||||||||||||||
351-0778-00 G | Discovering Management | 3 hrs |
| B. Clarysse, M. Ambühl, S. Brusoni, E. Fleisch, G. Grote, V. Hoffmann, T. Netland, G. von Krogh, F. von Wangenheim | |||||||||||||||||||||||||||||
351-0778-01L | Discovering Management (Exercises) Complementary exercises for the module Discovering Managment. Prerequisite: Participation and successful completion of the module Discovering Management (351-0778-00L) is mandatory. | W | 1 credit | 1U | |||||||||||||||||||||||||||||
351-0778-01 U | Discovering Management (Exercises) | 1 hrs |
| B. Clarysse, L. De Cuyper | |||||||||||||||||||||||||||||
363-0387-00L | Corporate Sustainability | W | 3 credits | 2G | |||||||||||||||||||||||||||||
363-0387-00 G | Corporate Sustainability Lecture in HG F 3 Exercises: from 01.11.2017 | 2 hrs |
| V. Hoffmann | |||||||||||||||||||||||||||||
363-0389-00L | Technology and Innovation Management | W | 3 credits | 2G | |||||||||||||||||||||||||||||
363-0389-00 G | Technology and Innovation Management | 2 hrs |
| S. Brusoni | |||||||||||||||||||||||||||||
363-0389-02L | Technology and Innovation Management (Additional Cases) Only for Mechanical Engineering BSc. | W | 1 credit | 1U | |||||||||||||||||||||||||||||
363-0389-02 U | Technology and Innovation Management (Additional Cases) When: informal meetings will be set up between student and tutor to give feedback. | 10s hrs | S. Brusoni | ||||||||||||||||||||||||||||||
363-0445-00L | Production and Operations Management | W+ | 3 credits | 2G | |||||||||||||||||||||||||||||
363-0445-00 G | Production and Operations Management | 2 hrs |
| T. Netland | |||||||||||||||||||||||||||||
363-0445-02L | Production and Operations Management (Additional Cases) | W+ | 1 credit | 2A | |||||||||||||||||||||||||||||
363-0445-02 A | Production and Operations Management (Additional Cases) this time-slot is used only on specific dates. See detailed program. A parallel enrolment to the lecture 363-0445-00L Production and Operations Management is mandatory. | 30s hrs |
| T. Netland | |||||||||||||||||||||||||||||
363-0503-00L | Principles of Microeconomics | W | 3 credits | 2G | |||||||||||||||||||||||||||||
363-0503-00 G | Principles of Microeconomics | 2 hrs |
| M. Filippini | |||||||||||||||||||||||||||||
363-0541-00L | Systems Dynamics and Complexity | W+ | 3 credits | 3G | |||||||||||||||||||||||||||||
363-0541-00 G | Systems Dynamics and Complexity Lecture: Thurday, 8-10 h Exercises: Tuesday, 12-13 h | 3 hrs |
| F. Schweitzer, G. Casiraghi, V. Nanumyan | |||||||||||||||||||||||||||||
363-0541-02L | Systems Dynamics and Complexity (Additional Cases) Only for Mechanical Engineering BSc. | W+ | 1 credit | ||||||||||||||||||||||||||||||
363-0541-02 U | Systems Dynamics and Complexity (Additional Cases) | 2s hrs | F. Schweitzer | ||||||||||||||||||||||||||||||
363-0565-00L | Principles of Macroeconomics | W | 3 credits | 2V | |||||||||||||||||||||||||||||
363-0565-00 V | Principles of Macroeconomics | 2 hrs |
| J.‑E. Sturm | |||||||||||||||||||||||||||||
Design, Mechanics and Materials Focus Coordinator: Prof. Kristina Shea In order to achieve the required 20 credit points for the Focus Specialization Design, Mechanics and Material you are free to choose any of the courses offered within the focus and are encouraged to select among those recommended. If you wish to take one of the Master level courses, you must get approval from the lecturer. | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0360-00L | Procedures for the Analysis of Structures | W+ | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0360-00 V | Methoden der Strukturanalyse | 2 hrs |
| G. Kress | |||||||||||||||||||||||||||||
151-0360-00 U | Methoden der Strukturanalyse Die Übungen beginnen in der zweiten Semesterwoche. | 1 hrs |
| G. Kress | |||||||||||||||||||||||||||||
151-0364-00L | Lightweight Structures Laboratory | W+ | 4 credits | 5A | |||||||||||||||||||||||||||||
151-0364-00 A | Strukturlabor Die Lehrveranstaltung beginnt in der zweiten Semesterwoche. | 5 hrs |
| M. Zogg, P. Ermanni | |||||||||||||||||||||||||||||
151-0509-00L | Microscale Acoustofluidics Number of participants limited to 30. | W | 4 credits | 3G | |||||||||||||||||||||||||||||
151-0509-00 G | Microscale Acoustofluidics | 3 hrs |
| J. Dual | |||||||||||||||||||||||||||||
151-0524-00L | Continuum Mechanics I | W | 4 credits | 2V + 1U | |||||||||||||||||||||||||||||
151-0524-00 V | Continuum Mechanics I | 2 hrs |
| E. Mazza | |||||||||||||||||||||||||||||
151-0524-00 U | Continuum Mechanics I Exercises start in the second week of the semester. | 1 hrs |
| E. Mazza | |||||||||||||||||||||||||||||
151-0731-00L | Forming Technology I - Basic Knowledge | W | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-0731-00 V | Umformtechnik I - Grundlagen | 2 hrs |
| P. Hora | |||||||||||||||||||||||||||||
151-0731-00 U | Umformtechnik I - Grundlagen | 2 hrs |
| P. Hora | |||||||||||||||||||||||||||||
151-3201-00L | Studies on Engineering Design | W+ | 3 credits | 6A | |||||||||||||||||||||||||||||
151-3201-00 A | Studies on Engineering Design | 90s hrs | K. Shea, P. Ermanni, M. Meboldt | ||||||||||||||||||||||||||||||
151-3203-00L | Grand Challenges in Engineering Design | W+ | 1 credit | 3S | |||||||||||||||||||||||||||||
151-3203-00 S | Grand Challenges in Engineering Design The course starts in the second week of the semester. | 3 hrs |
| P. Ermanni, M. Meboldt, K. Shea | |||||||||||||||||||||||||||||
151-3207-00L | Lightweight | W+ | 4 credits | 2V + 2U | |||||||||||||||||||||||||||||
151-3207-00 V | Leichtbau Die Lehrveranstaltung beginnt in der zweiten Semesterwoche. | 2 hrs |
| P. Ermanni, G. Molinari | |||||||||||||||||||||||||||||
151-3207-00 U | Leichtbau Die Lehrveranstaltung beginnt in der zweiten Semesterwoche. | 2 hrs |
| P. Ermanni, G. Molinari | |||||||||||||||||||||||||||||
151-3209-00L | Engineering Design Optimization Number of participants limited to 35. | W | 4 credits | 4G | |||||||||||||||||||||||||||||
151-3209-00 G | Engineering Design Optimization | 4 hrs |
| K. Shea, T. Stankovic | |||||||||||||||||||||||||||||
151-3213-00L | Integrative Ski Building Workshop Number of participants limited to 12. To apply, please send the following information to Link by 31 July, 2017: Letter of Motivation (one page) , CV, Transcript of Records | W+ | 3 credits | 6P | |||||||||||||||||||||||||||||
151-3213-00 P | Integrative Ski Building Workshop - Introductory lecture on Monday 4 October 2017 at 13-17 (venu/tbd) - Courses on Wednesdays at 13-17h (venu/EDAC group room): 11/18/25 October, 1/29 November, 6/13 December 2017, 8. January.2018 (ski test) | 90s hrs |
| T. Luthe | |||||||||||||||||||||||||||||
327-0501-00L | Metals I | W | 3 credits | 2V + 1U | |||||||||||||||||||||||||||||
327-0501-00 V | Metalle I | 2 hrs |
| R. Spolenak | |||||||||||||||||||||||||||||
327-0501-00 U | Metalle I | 1 hrs |
| R. Spolenak | |||||||||||||||||||||||||||||
327-1204-00L | Materials at Work I | W | 4 credits | 4S | |||||||||||||||||||||||||||||
327-1204-00 S | Materials at Work I | 4 hrs |
| R. Spolenak, E. Dufresne, R. Koopmans | |||||||||||||||||||||||||||||
Engineering Tools IV The participation at the Engineering Tools course is mandatory. If you miss any classes, no credit points will be awarded. For exemptions you have to contact the lecturer of the course. | |||||||||||||||||||||||||||||||||
Number | Title | Type | ECTS | Hours | Lecturers | ||||||||||||||||||||||||||||
151-0015-10L | Engineering Tool IV: Experimental Modal Analysis All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 16. Only one course can be chosen per semester. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0015-10 K | Ingenieur-Tool IV: Experimentelle Modalanalyse Blockkurs in der ersten Semesterwoche | 12s hrs |
| F. Kuster | |||||||||||||||||||||||||||||
151-0024-10L | Engineering Tool IV/V: Digital Automotive Plant Simulation Methods All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 25. Only one course can be chosen per semester. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0024-10 K | Ingenieur-Tool IV/V: Simulationstools der digitalen Automobilfabrik Blockkurs in der ersten Semesterwoche | 12s hrs |
| P. Hora | |||||||||||||||||||||||||||||
151-0025-10L | Engineering Tool IV: Introduction to CAM and Motion Simulation All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 40. Only one course can be chosen per semester. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0025-10 K | Ingenieur-Tool IV: Einführung in CAM und Bewegungssimulation Blockkurs in der ersten Semesterwoche. | 12s hrs |
| M. Schmid | |||||||||||||||||||||||||||||
151-0027-10L | Engineering Tool IV/V: Programming with LabView All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 16. Only one course can be chosen per semester. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0027-10 K | Ingenieur-Tool IV/V: Programmierung mit LabView Blockkurs in der ersten Semesterwoche | 12s hrs |
| L. Prochazka | |||||||||||||||||||||||||||||
151-0030-10L | Engineering Tool IV: Modelling and Servo Axis Control of Machine Tool Manipulators All Engineering Tool courses are for MAVT-Bachelor students only. Prerequisites: Matlab skills; your laptop with Matlab/Simulink may be useful. Number of participants limited to 30. Only one course can be chosen per semester. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0030-10 K | Ingenieur-Tool IV: Modellbildung und Antriebsinbetriebnahme von WZM Blockkurs in der ersten Semesterwoche Laptop mit Matlab (je 2 Studierende) erforderlich für die Übungen | 12s hrs |
| O. Zirn | |||||||||||||||||||||||||||||
151-0032-10L | Engineering Tool IV: Introduction to the Methods of Six Sigma Quality Control and Lean Production All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 36. Only one course can be chosen per semester. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0032-10 K | Ingenieur-Tool IV: Einführung in die Methoden von Six Sigma Quallity Control und Lean Production Blockkurs in der ersten Semesterwoche. | 12s hrs |
| B. G. Rüttimann | |||||||||||||||||||||||||||||
151-0057-10L | Engineering Tool IV/V: Systems Engineering for Project Work All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 60. Only one course can be chosen per semester. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0057-10 K | Ingenieur-Tool IV/V: Systems Engineering für Projekt- und Studienarbeiten Blockkurs in der ersten Semesterwoche. | 12s hrs |
| R. Züst | |||||||||||||||||||||||||||||
151-0059-10L | Engineering Tool IV: CAD-Methodology and PDM-Technology in the Focus Project All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 25. Only one course can be chosen per semester. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0059-10 K | Ingenieur-Tool IV: CAD Methodik und PDM-Einsatz im Fokusprojekt Blockkurs in der ersten Semesterwoche Die Teilnehmer sollten in Fokusprojekten involviert sein. Falls nicht, bitte bei den Dozierenden anfragen. | 12s hrs |
| M. Schütz | |||||||||||||||||||||||||||||
151-0061-10L | Engineering Tool IV/V: Scientific Writing with LaTeX and Vector Graphics All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 40. Only one course can be chosen per semester. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0061-10 K | Ingenieur-Tool IV/V: Wissenschaftliches Arbeiten mit LaTeX und Vektorgraphiken Blockkurs in der ersten Semesterwoche. Anwesenheitspflicht an allen drei Nachmittagen | 12s hrs |
| R. Gassert | |||||||||||||||||||||||||||||
151-0062-10L | Engineering Tool V: Computer-Aided Design Methods Number of participants limited to 25. Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0062-10 K | Engineering-Tool V: Computer-Aided Design Methods
Block course in the first week of the semester. | 12s hrs |
| T. Stankovic, K. Shea | |||||||||||||||||||||||||||||
151-0067-10L | Engineering Tool IV: Sketching and Visualization of Technical Concepts All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 20. Only one course can be chosen per semester. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0067-10 K | Ingenieur-Tool IV: Sketching und Visualisieren von technischen Konzepten Blockkurs in der ersten Semesterwoche. | 12s hrs |
| H. Stahl | |||||||||||||||||||||||||||||
151-0091-10L | Engineering Tool IV: Scientific Writing All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 50. | W | 0.4 credits | 1K | |||||||||||||||||||||||||||||
151-0091-10 K | Ingenieur Tool IV: Wissenschaftliches Schreiben Blockkurs in der ersten Semesterwoche. | 12s hrs |
| U. Brändle, M. Paschke |