Search result: Course units in Autumn Semester 2017
Mechanical Engineering Bachelor | ||||||
5. Semester | ||||||
Compulsory Courses Examination Block 3 | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
---|---|---|---|---|---|---|
151-0261-00L | Thermodynamics III | O | 3 credits | 2V + 1U | R. S. Abhari, A. Haselbacher | |
151-0103-00L | Fluid Dynamics II | O | 3 credits | 2V + 1U | P. Jenny | |
Electives | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0573-00L | System Modeling | W | 4 credits | 2V + 2U | G. Ducard | |
151-0575-01L | Signals and Systems | W | 4 credits | 2V + 2U | R. D'Andrea | |
151-0917-00L | Mass Transfer | W | 4 credits | 2V + 2U | R. Büchel, K. Wegner, M. Eggersdorfer | |
151-0973-00L | Fundamentals in Process Engineering | W | 4 credits | 2V + 2U | P. Rudolf von Rohr, C. Müller | |
151-3207-00L | Lightweight | W | 4 credits | 2V + 2U | P. Ermanni, G. Molinari | |
227-0076-00L | Electrical Engineering II | W | 4 credits | 2V + 2U | J. Biela | |
363-0511-00L | Managerial Economics Not for MSc students belonging to D-MTEC! | W | 4 credits | 3V | S. Rausch, V. Hoffmann | |
401-0603-00L | Stochastics (Probability and Statistics) | W | 4 credits | 2V + 1U | M. Schweizer | |
401-0435-00L | Computational Methods for Engineering Applications II | W | 4 credits | 2V + 2U | S. Mishra | |
Focus Project | ||||||
Focus Projects in Energy, Flows and Processes | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0076-10L | Swissloop This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | J. Carmeliet | |
Focus Projects in Mechatronics | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0073-10L | Indoor Mobility Robot This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | R. Siegwart | |
151-0073-20L | Robotic Elephant Trunk This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | M. Hutter, R. Siegwart | |
151-0073-40L | Space Toat This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | M. Hutter | |
Focus Projects in Manufacturing | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0075-10L | iTruck Does not take place this semester. This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | K. Wegener | |
151-0075-20L | Formula Student Electric - Chassis This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | P. Hora | |
151-0075-30L | iRoadster This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | K. Wegener | |
151-0075-40L | Formula Student Electric - Drivetrain This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | P. Hora | |
151-0075-50L | Multispeed ESC This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | K. Wegener | |
151-0075-70L | ETHEC Electronics and Control This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | K. Wegener | |
151-0075-80L | ETHEC Drive Train This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | K. Wegener | |
Focus Projects in Design, Mechanics and Materials | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0079-10L | Carbon Factory This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | P. Ermanni | |
151-0079-20L | Motostudent This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | P. Ermanni | |
151-0079-30L | Airborne Wind Energy System 2 This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | P. Ermanni | |
151-0079-40L | Cardiovascular Interventions Simulator for Surgents This course is part of a one-year course. The 14 credit points will be issued at the end of FS2018 with new enrolling for the same Focus-Project in FS2018. For MAVT BSc and ITET BSc only. Prerequisites for the focus projects: a. Basis examination successfully passed b. Block 1 and 2 successfully passed For enrollment, please contact the D-MAVT Student Administration. | W | 0 credits | 15A | M. Meboldt | |
Courses Eligible for Focus Projects | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0141-00L | Leadership Number of participants limited to 25. Only students for focus projects or doctoral students. | W | 1 credit | 2G | A. Halbleib | |
151-0761-00L | Practice Course to Focus Projects on Product Development Only students for focus projects. 2 up to 3 students per focus project. | W | 3 credits | 3G | R. P. Haas, C. R. Dietzsch, I. Goller, C. Schorno | |
151-0763-00L | Practice Course to Focus Projects on CAD and CAE Based on Siemens NX - Pro Fokus-Team sind maximal drei Studierende zugelassen. Falls ein Team mehr als drei Teilnehmer anmelden möchte, muss dies von uns bewilligt werden. - Es ist zwingend erforderlich, dass die Teilnehmenden im Rahmen Ihres Fokus-Projektes CAD, CAE optional auch PLM als Tools selbst im Rahmen des Projektes aktiv einsetzen werden. - Bei Unsicherheiten ob diese Bedingungen erfüllt werden können, sollen Sie vor der Anmeldung bitte uns kontaktieren. | W | 3 credits | 3G | J.‑L. Emery, M. Schütz | |
Focus Specialization | ||||||
Energy, Flows and Processes Focus Coordinator: Prof. Christoph Müller In order to achieve the required 20 credit points for the Focus Specialization Energy, Flows and Processes you need to choose at least 2 of the 4 compulsory courses (HS/FS) and at least 2 of the electives courses (HS/FS). One course could be selected among all the courses offered by D-MAVT (Bachelor and Masters). | ||||||
Compulsory Courses | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0123-00L | Experimental Methods for Engineers | W+ | 4 credits | 2V + 2U | T. Rösgen, K. Boulouchos, D. J. Norris, H.‑M. Prasser | |
151-0293-00L | Combustion and Reactive Processes in Energy and Materials Technology | W+ | 4 credits | 2V + 1U + 2A | K. Boulouchos, F. Ernst, N. Noiray, Y. Wright | |
Elective Courses | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0109-00L | Turbulent Flows | W | 4 credits | 2V + 1U | P. Jenny | |
151-0235-00L | Thermodynamics of Novel Energy Conversion Technologies Number of participants limited to 100. | W | 4 credits | 3G | C. S. Sharma, G. Sansavini | |
151-0917-00L | Mass Transfer | W | 4 credits | 2V + 2U | R. Büchel, K. Wegner, M. Eggersdorfer | |
151-0973-00L | Fundamentals in Process Engineering | W | 4 credits | 2V + 2U | P. Rudolf von Rohr, C. Müller | |
151-0135-00L | Additional Case for the Focus Specialization Exclusive for D-MAVT Bachelor's students in Focus Specialization. For enrollment, please contact the D-MAVT Student Administration. | W | 1 credit | 2A | Professors | |
Mechatronics Focus Coordinator: Prof. Bradley Nelson To achieve the 20 credits for Focus Specialization Mechatronics, 151-0640-00L Studies on Mechatronics is compulsory. | ||||||
Compulsory Courses | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0640-00L | Studies on Mechatronics The following professors can be chosen and please contact the professor directly: M. Chli, R. D'Andrea, J. Dual, E. Frazzoli, R. Gassert, C. Hierold, M. Hutter, W. Karlen, J. Lygeros, M. Meboldt, B. Nelson, C. Onder, M. Pollefeys, D. Poulikakos, R. Riener, R.Y. Siegwart, L. Thiele, K. Wegener and M. Zeilinger This course is not available to incoming exchange students. | O | 5 credits | 11A | Professors | |
Elective Courses | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0509-00L | Microscale Acoustofluidics Number of participants limited to 30. | W | 4 credits | 3G | J. Dual | |
151-0575-01L | Signals and Systems | W | 4 credits | 2V + 2U | R. D'Andrea | |
151-0604-00L | Microrobotics | W | 4 credits | 3G | B. Nelson | |
151-0621-00L | Microsystems I: Process Technology and Integration | W | 6 credits | 3V + 3U | M. Haluska, C. Hierold | |
227-0113-00L | Power Electronics | W | 6 credits | 4G | J. W. Kolar | |
227-0517-00L | Electrical Drive Systems II | W | 6 credits | 4G | P. Steimer, G. Scheuer, C. A. Stulz | |
376-1504-00L | Physical Human Robot Interaction (pHRI) Number of participants limited to 26. | W | 4 credits | 2V + 2U | R. Gassert, O. Lambercy | |
151-0135-00L | Additional Case for the Focus Specialization Exclusive for D-MAVT Bachelor's students in Focus Specialization. For enrollment, please contact the D-MAVT Student Administration. | W | 1 credit | 2A | Professors | |
Microsystems and Nanoscale Engineering Focus Coordinator: Prof. Christofer Hierold | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0604-00L | Microrobotics | W | 4 credits | 3G | B. Nelson | |
151-0619-00L | Introduction to Nanoscale Engineering This class is strictly only for BSc MAVT student. | W | 5 credits | 2V + 3P | R. Büchel, V. Mavrantzas, A. Teleki Sotiriou | |
151-0621-00L | Microsystems I: Process Technology and Integration | W+ | 6 credits | 3V + 3U | M. Haluska, C. Hierold | |
151-0643-00L | Studies on Micro and Nano Systems Please contact one of the following professors directly: J. Dual, C. Hierold, B. Nelson, D. Norris, D. Poulikakos, S.E. Pratsinis and A. Stemmer This course is not available to incoming exchange students. | W+ | 5 credits | 11A | Professors | |
151-0911-00L | Introduction to Plasmonics | W | 4 credits | 2V + 1U | D. J. Norris | |
151-0135-00L | Additional Case for the Focus Specialization Exclusive for D-MAVT Bachelor's students in Focus Specialization. For enrollment, please contact the D-MAVT Student Administration. | W | 1 credit | 2A | Professors | |
151-0237-00L | Advanced Optical Methods in Nanotechnology | W | 4 credits | 2V + 1U | H. Eghlidi | |
Manufacturing Science Focus Coordinator: Prof. Konrad Wegener To achieve the required 20 credit points for the focus specialization you need to pass all 3 compulsory courses (HS/FS). The other 8 credit points can be achieved from the elective courses. | ||||||
Compulsory Courses | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0705-00L | Manufacturing I | O | 4 credits | 2V + 2U | K. Wegener, M. Boccadoro, F. Kuster | |
151-0733-00L | Forming Technology III - Forming Processes | O | 4 credits | 2V + 2U | P. Hora | |
Elective Courses | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0573-00L | System Modeling | W | 4 credits | 2V + 2U | G. Ducard | |
151-0703-00L | Operational Simulation of Production Lines | W+ | 4 credits | 2V + 1U | P. Acél | |
151-0717-00L | Mechanical Production: Assembly, Joining and Coating Technology | W+ | 4 credits | 2V + 1U | F. Kuster, V. H. Derflinger, F. Durand, P. Jousset | |
151-0719-00L | Quality of Machine Tools - Dynamics and Metrology at Micro and Submicro Level | W+ | 4 credits | 2V + 1U | A. Günther, F. Kuster | |
151-0723-00L | Manufacturing of Electronic Devices | W+ | 4 credits | 3G | A. Kunz, A. Guber, R.‑D. Moryson, F. Reichert | |
151-0731-00L | Forming Technology I - Basic Knowledge | W+ | 4 credits | 2V + 2U | P. Hora | |
151-0833-00L | Principles of Nonlinear Finite-Element-Methods | W+ | 5 credits | 2V + 2U | N. Manopulo, B. Berisha | |
227-0113-00L | Power Electronics | W | 6 credits | 4G | J. W. Kolar | |
Biomedical Engineering Focus Coordinator: Prof. Edoardo Mazza | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0255-00L | Energy Conversion and Transport in Biosystems | W | 4 credits | 2V + 1U | A. Ferrari | |
151-0509-00L | Microscale Acoustofluidics Number of participants limited to 30. | W | 4 credits | 3G | J. Dual | |
151-0524-00L | Continuum Mechanics I | W | 4 credits | 2V + 1U | E. Mazza | |
151-0604-00L | Microrobotics | W | 4 credits | 3G | B. Nelson | |
151-0619-00L | Introduction to Nanoscale Engineering This class is strictly only for BSc MAVT student. | W | 5 credits | 2V + 3P | R. Büchel, V. Mavrantzas, A. Teleki Sotiriou | |
151-0621-00L | Microsystems I: Process Technology and Integration | W | 6 credits | 3V + 3U | M. Haluska, C. Hierold | |
227-0385-10L | Biomedical Imaging | W | 6 credits | 5G | S. Kozerke, K. P. Prüssmann | |
227-0393-10L | Bioelectronics and Biosensors | W | 6 credits | 2V + 2U | J. Vörös, M. F. Yanik, T. Zambelli | |
376-0021-00L | Introduction to Biomedical Engineering I | W | 4 credits | 3G | R. Müller, J. G. Snedeker, M. Zenobi-Wong | |
376-0203-00L | Movement and Sport Biomechanics | W | 4 credits | 3G | W. R. Taylor, R. List, S. Lorenzetti | |
376-1504-00L | Physical Human Robot Interaction (pHRI) Number of participants limited to 26. | W | 4 credits | 2V + 2U | R. Gassert, O. Lambercy | |
376-1714-00L | Biocompatible Materials | W | 4 credits | 3G | K. Maniura, J. Möller, M. Zenobi-Wong | |
Management, Technology and Economics Focus Coordinators: Prof. Marko Köthenbürger D-MTEC and Dr. Jost Hamschmidt D-MTEC | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0733-00L | Forming Technology III - Forming Processes | W | 4 credits | 2V + 2U | P. Hora | |
351-0778-00L | Discovering Management Entry level course in management for BSc, MSc and PHD students at all levels not belonging to D-MTEC. This course can be complemented with Discovering Management (Excercises) 351-0778-01. | W | 3 credits | 3G | B. Clarysse, M. Ambühl, S. Brusoni, E. Fleisch, G. Grote, V. Hoffmann, T. Netland, G. von Krogh, F. von Wangenheim | |
351-0778-01L | Discovering Management (Exercises) Complementary exercises for the module Discovering Managment. Prerequisite: Participation and successful completion of the module Discovering Management (351-0778-00L) is mandatory. | W | 1 credit | 1U | B. Clarysse, L. De Cuyper | |
363-0387-00L | Corporate Sustainability | W | 3 credits | 2G | V. Hoffmann | |
363-0389-00L | Technology and Innovation Management | W | 3 credits | 2G | S. Brusoni | |
363-0389-02L | Technology and Innovation Management (Additional Cases) Only for Mechanical Engineering BSc. | W | 1 credit | 1U | S. Brusoni | |
363-0445-00L | Production and Operations Management | W+ | 3 credits | 2G | T. Netland | |
363-0445-02L | Production and Operations Management (Additional Cases) | W+ | 1 credit | 2A | T. Netland | |
363-0503-00L | Principles of Microeconomics | W | 3 credits | 2G | M. Filippini | |
363-0541-00L | Systems Dynamics and Complexity | W+ | 3 credits | 3G | F. Schweitzer, G. Casiraghi, V. Nanumyan | |
363-0541-02L | Systems Dynamics and Complexity (Additional Cases) Only for Mechanical Engineering BSc. | W+ | 1 credit | F. Schweitzer | ||
363-0565-00L | Principles of Macroeconomics | W | 3 credits | 2V | J.‑E. Sturm | |
Design, Mechanics and Materials Focus Coordinator: Prof. Kristina Shea In order to achieve the required 20 credit points for the Focus Specialization Design, Mechanics and Material you are free to choose any of the courses offered within the focus and are encouraged to select among those recommended. If you wish to take one of the Master level courses, you must get approval from the lecturer. | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0360-00L | Procedures for the Analysis of Structures | W+ | 4 credits | 2V + 1U | G. Kress | |
151-0364-00L | Lightweight Structures Laboratory | W+ | 4 credits | 5A | M. Zogg, P. Ermanni | |
151-0509-00L | Microscale Acoustofluidics Number of participants limited to 30. | W | 4 credits | 3G | J. Dual | |
151-0524-00L | Continuum Mechanics I | W | 4 credits | 2V + 1U | E. Mazza | |
151-0731-00L | Forming Technology I - Basic Knowledge | W | 4 credits | 2V + 2U | P. Hora | |
151-3201-00L | Studies on Engineering Design | W+ | 3 credits | 6A | K. Shea, P. Ermanni, M. Meboldt | |
151-3203-00L | Grand Challenges in Engineering Design | W+ | 1 credit | 3S | P. Ermanni, M. Meboldt, K. Shea | |
151-3207-00L | Lightweight | W+ | 4 credits | 2V + 2U | P. Ermanni, G. Molinari | |
151-3209-00L | Engineering Design Optimization Number of participants limited to 35. | W | 4 credits | 4G | K. Shea, T. Stankovic | |
151-3213-00L | Integrative Ski Building Workshop Number of participants limited to 12. To apply, please send the following information to Link by 31 July, 2017: Letter of Motivation (one page) , CV, Transcript of Records | W+ | 3 credits | 6P | T. Luthe | |
327-0501-00L | Metals I | W | 3 credits | 2V + 1U | R. Spolenak | |
327-1204-00L | Materials at Work I | W | 4 credits | 4S | R. Spolenak, E. Dufresne, R. Koopmans | |
Engineering Tools IV The participation at the Engineering Tools course is mandatory. If you miss any classes, no credit points will be awarded. For exemptions you have to contact the lecturer of the course. | ||||||
Number | Title | Type | ECTS | Hours | Lecturers | |
151-0015-10L | Engineering Tool IV: Experimental Modal Analysis All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 16. Only one course can be chosen per semester. | W | 0.4 credits | 1K | F. Kuster | |
151-0024-10L | Engineering Tool IV/V: Digital Automotive Plant Simulation Methods All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 25. Only one course can be chosen per semester. | W | 0.4 credits | 1K | P. Hora | |
151-0025-10L | Engineering Tool IV: Introduction to CAM and Motion Simulation All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 40. Only one course can be chosen per semester. | W | 0.4 credits | 1K | M. Schmid | |
151-0027-10L | Engineering Tool IV/V: Programming with LabView All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 16. Only one course can be chosen per semester. | W | 0.4 credits | 1K | L. Prochazka | |
151-0030-10L | Engineering Tool IV: Modelling and Servo Axis Control of Machine Tool Manipulators All Engineering Tool courses are for MAVT-Bachelor students only. Prerequisites: Matlab skills; your laptop with Matlab/Simulink may be useful. Number of participants limited to 30. Only one course can be chosen per semester. | W | 0.4 credits | 1K | O. Zirn | |
151-0032-10L | Engineering Tool IV: Introduction to the Methods of Six Sigma Quality Control and Lean Production All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 36. Only one course can be chosen per semester. | W | 0.4 credits | 1K | B. G. Rüttimann | |
151-0057-10L | Engineering Tool IV/V: Systems Engineering for Project Work All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 60. Only one course can be chosen per semester. | W | 0.4 credits | 1K | R. Züst | |
151-0059-10L | Engineering Tool IV: CAD-Methodology and PDM-Technology in the Focus Project All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 25. Only one course can be chosen per semester. | W | 0.4 credits | 1K | M. Schütz | |
151-0061-10L | Engineering Tool IV/V: Scientific Writing with LaTeX and Vector Graphics All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 40. Only one course can be chosen per semester. | W | 0.4 credits | 1K | R. Gassert | |
151-0062-10L | Engineering Tool V: Computer-Aided Design Methods Number of participants limited to 25. Only one course can be chosen per semester. All Engineering Tool courses are for MAVT-Bachelor students only. | W | 0.4 credits | 1K | T. Stankovic, K. Shea | |
151-0067-10L | Engineering Tool IV: Sketching and Visualization of Technical Concepts All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 20. Only one course can be chosen per semester. | W | 0.4 credits | 1K | H. Stahl | |
151-0091-10L | Engineering Tool IV: Scientific Writing All Engineering Tool courses are for MAVT-Bachelor students only. Number of participants limited to 50. | W | 0.4 credits | 1K | U. Brändle, M. Paschke |