Search result: Catalogue data in Autumn Semester 2019

Environmental Engineering Bachelor Information
5. Semester
Compulsory Courses 5. Semester
Examination Block 3
NumberTitleTypeECTSHoursLecturers
102-0215-00LUrban Water Management II Information O4 credits2GM. Maurer, P. Staufer
AbstractTechnical networks in urban water engineering. Water supply: Optimization, water hammer, corrosion and hygiene. Urban drainage: Urban hydrology, non stationary flow, pollutant transport, infiltration of rainwater, wet weather pollution control. General planning, organisation and operation of regional drainage systems.
ObjectiveConsolidation of the basic procedures for design and operation of technical networks in water engineering.
ContentDemand Side Management versus Supply Side Management
Optimierung von Wasserverteilnetzen
Druckstösse
Kalkausfällung, Korrosion von Leitungen
Hygiene in Verteilsystemen
Siedlungshydrologie: Niederschlag, Abflussbildung
Instationäre Strömungen in Kanalisationen
Stofftransport in der Kanalisation
Einleitbedingungen bei Regenwetter
Versickerung von Regenwasser
Generelle Entwässerungsplanung (GEP)
Lecture notesWritten material and copies of the overheads will be available.
Prerequisites / NoticePrerequisite: Introduction to Urban Water Management
102-0455-01LGroundwater IO4 credits3GJ. Jimenez-Martinez, M. Willmann
AbstractThe course provides a quantitative introduction to groundwater flow and contaminant transport.
ObjectiveUnderstanding of the basic concepts on groundwater flow and contaminant transport processes. Formulation and solving of practical problems.
ContentProperties of porous and fractured media, Darcy’s law, flow equation, stream functions, interpretation of pumping tests, transport processes, transport equation, analytical solutions for transport, numerical methods: finite differences method, aquifers remediation, case studies.
Lecture notesScript and collection of problems available
LiteratureJ. Bear, Hydraulics of Groundwater, McGraw-Hill, New York, 1979
K. de Ridder, Untersuchung und Anwendung von Pumpversuchen, Verl. R. Müller, Köln, 1970
P.A. Domenico, F.W. Schwartz, Physical and Chemical Hydrogeology, J. Wilson & Sons, New York, 1990
R.A. Freeze, J.A. Cherry, Groundwater, Prentice-Hall, New Jersey, 1979
W. Kinzelbach, R. Rausch, Grundwassermodellierung, Gebrüder Bornträger, Stuttgart, 1995
102-0635-01LAir Pollution Control Information O6 credits4GJ. Wang, B. Buchmann
AbstractThe lecture provides in the first part an introduction to the formation of air pollutants by technical processes, the emission of these chemicals into the atmosphere and their impact on air quality. The second part covers different strategies and techniques for emission reduction. The basic knowledge is deepened by the discussion of specific air pollution problems of today's society.
ObjectiveThe students gain general knowledge of the technical processes resulting in air pollution and study the methods used for air pollution control. The students can identify major air pollution sources and understand the methods for measuring pollutants, collecting and analyzing data. The students can suggest and evaluate possible control methods and equipment, design control systems and estimate their efficiency and efforts.
The students know the different strategies of air pollution control and are familiar with their scientific fundamentals. They are able to incorporate goals concerning air quality into their engineering work.
ContentPart 1 Emission, Immission, Transmission
Fluxes of pollutants and their environmental impact:
- physical and chemical processes leading to emission of pollutants
- mass and energy of processes
- Emission measurement techniques and concepts
- quantification of emissions from individual and aggregated sources
- extent and development of the emissions (Switzerland and global)
- propagation and transport of pollutants (transmission)
- meteorological parameters influencing air pollution dispersion
- deterministic and stochastic models, describing air pollution dispersion
- dispersion models (Gaussian model, box model, receptor model)
- measurement concepts for ambient air (immission level)
- extent and development of ambient air mixing ratios
- goal and instrument of air pollution control

Part 2 Air Pollution Control Technologies
The reduction of the formation of pollutants is done by modifying the processes (pro-cessintegrated measures) and by different engineering operations for the cleaning of waste gas (downstream pollution control). It will be demonstrated, that the variety of these procedures can be traced back to the application of a few basic physical and chemical principles.

Procedures for the removal of particles (inertial separator, filtration, electrostatic precipitators, scrubbers) with their different mechanisms (field forces, impaction and diffusion processes) and the modelling of these mechanisms.

Procedures for the removal of gaseous pollutants and the description of the driving forces involved, as well as the equilibrium and the kinetics of the relevant processes (absorption, adsorption as well as thermal, catalytic and biological conversions).

Discussion of the technical possibilities to solve the actual air pollution problems.
Lecture notesBrigitte Buchmann, Air pollution control, Part I
Jing Wang, Air pollution control, Part II
Lecture slides and exercises
LiteratureList of literature included in script
Prerequisites / NoticeCollege lectures on basic physics, chemistry and mathematics.
Language of instruction: In German or in English.
102-0675-00LEarth ObservationO4 credits3GI. Hajnsek, E. Baltsavias
AbstractThe aim of the course is to provide the fundamental knowledge about earth observation sensors, techniques and methods for bio/geophysical environmental parameter estimation.
ObjectiveThe aim of the course is to provide the fundamental knowledge about earth observation sensors, techniques and methods for bio/geophysical environmental parameter estimation. Students should know at the end of the course:
1. Basics of measurement principle
2. Fundamentals of image acquisition
3. Basics of the sensor-specific geometries
4. Sensor-specific determination of environmental parameters
ContentDie Lehrveranstaltung gibt einen Einblick in die heutige Erdbeoachtung mit dem follgenden skizzierten Inhalt:
1. Einführung in die Fernerkundung von Luft- und Weltraum gestützen Systemen
2. Einführung in das Elektromagnetische Spektrum
3. Einführung in optische Systeme (optisch und hyperspektral)
4. Einführung in Mikrowellen-Technik (aktiv und passiv)
5. Einführung in atmosphärische Systeme (meteo und chemisch)
6. Einführung in die Techniken und Methoden zur Bestimmung von Umweltparametern
7. Einführung in die Anwendungen zur Bestimmung von Umweltparametern in der Hydrologie, Glaziologie, Forst und Landwirtschaft, Geologie und Topographie
Lecture notesFolien zu jeden Vorlesungsblock werden zur Verfügung gestellt.
LiteratureAusgewählte Literatur wird am Anfang der Vorlesung vorgestellt.
Examination Block 4
NumberTitleTypeECTSHoursLecturers
101-0031-02LBusiness Administration Information O2 credits2VJ.‑P. Chardonnens
AbstractIntroduction to business administration
Principles of accounting and financial management
Financial planning and capital budgeting of projects
Costing systems by corporations
ObjectivePrepare and analyze the financial statements of organizations
Establish budget and determine profitability of investment
Understand the major costing systems
Perform some product calculations
ContentOverview in business administration

Financial Accounting
- Balance sheet, income statement
- Accounts, double-entry bookkeeping
- Year-end closing and financial statements

Financial Management
- Financial statement analysis
- Financial planning
- Investment decisions

Management Accounting
- Full costing and marginal costing
- Product costing
- Management decisions
851-0723-00LEnvironmental Law I: Fundamentals and Concepts Restricted registration - show details
Only for Environmental Engineering BSc
O2 credits2VC. Jäger
AbstractThis class introduces students to the fundamentals of legal systems, focusing on environmental law. It covers the fundamentals of constitutional and administrative law, as opposed to private and criminal law. The class will focus on concepts, terminology and procedures of Swiss environmental law and selected aspects of European environmental law, supplemented through case studies.
ObjectiveStudents learn fundamental structures of the legal system, understand core concepts and selected problems of public law, focusing on Swiss and European environmental law. These insights can be applied in further law courses, in particular in the course "Environmental law: Areas and Case Studies."
ContentDie Vorlesung beginnt mit einer allgemeinen Einführung in das Recht (was ist Recht?) und situiert das Umweltrecht in der schweizerischen Rechtsordnung. Anschliessend folgen die Darstellung der Rechtsquellen sowie die juristische Methodenlehre, insbesondere die Auslegung und Anwendung von Rechtsnormen. Darauf aufbauend behandelt die Vorlesung die Ziele und Grundsätze des Umweltrechts, zeigt die rechtlichen Handlungsformen auf, insbesondere die Verfügung. Die Studierenden lernen die grundlegenden Schritte der Rechtsanwendung bzw. eines Verwaltungsverfahrens kennen. Sie erhalten auch einen kurzen Überblick über das Bau- und Planungsrecht. Ein Block zum europäischen Umweltrecht rundet die Vorlesung thematisch ab. Integrierte Fallbeispiele und Falldiskussionen zeigen die Praxisrelevanz auf und bieten Gelegenheit zur aktiven Mitarbeit der Studierenden.
Lecture notesChristoph Jäger/Andreas Bühler, Schweizerisches Umweltrecht, Bern 2016
LiteratureWeitere Literaturangaben folgen in der Vorlesung
101-0515-00LProject ManagementO2 credits2GC. G. C. Marxt
AbstractThe course gives a detailed introduction on various aspects of professional project management out of theory and practice. Established concepts and methods for project organization, planning, execution and evaluation are introduced and major challenges discussed. The course includes an introduction on specialized project management software as well as agile project management concepts.
ObjectiveProjects are not only the base of work in modern enterprises but also the primary type of cooperation with customers. Students of ETH will often work in or manage projects in the course of their career. Good project management knowledge is not only a guarantee for individual, but also for company wide success.

The goal of this course is to give a detailed introduction into project management. The students should learn to plan and execute a project.
ContentProject planning (aims, appointments, capacities, efforts and costs), project organization, scheduling and risk analysis, project execution, supervision and control, project evaluation, termination and documentation, conflict management, multinational project management, IT support as well as agile project management methods such as SCRUM.
Lecture notesNo.
The lecture slides and other additional material will be available for download from Moodle a week before each class.
Additional Compulsory Courses
NumberTitleTypeECTSHoursLecturers
102-0515-01LEnvironmental Engineering Seminars Information Restricted registration - show details O3 credits3SJ. Wang, P. Burlando, I. Hajnsek, S. Hellweg, M. Holzner, M. Maurer, P. Molnar, E. Morgenroth, R. Stocker
AbstractThe course is organized in the form of seminars held by the students. Topics selected from the core disciplines of the curriculum (water resources, urban water engineering, material fluxes, waste technology, air polution, earth observation) are discussed in the class on the basis of scientific papers that are illustrated and critically reviewed by the students.
ObjectiveLearn about recent research results in environmental engineering and analyse practical applications in environmental engineering.
Elective Blocks
Elective Block: Environmental Planning
NumberTitleTypeECTSHoursLecturers
102-0535-00LNoise Abatement Information W5 credits4GK. Eggenschwiler, J. M. Wunderli
AbstractBasics of acoustics and hearing. Measurement of sound. Impact of noise (physiological, psychological, social, economic). Legislation (focus on Swiss noise abatement ordinance), spatial planning. Sound propagation outdoor and in buildings. Calculation models and measurement procedures. Traffic noise (roads, railways, airports), shooting noise, noise from industrial plants. Building acoustics.
ObjectiveThe students will understand the basics of noise abatement: acoustics, impact of noise, meas-urement techniques and legislation. The students will be able to analyze different noise prob-lems and they will be able to solve simple problems of noise abatement.
ContentPhysikalische Grundlagen: Schalldruck, Wellen, Quellenarten.
Akustische Messtechnik: Umgang mit Dezibel, Akustische Masse, Schallpegelmesser, Spektralanalyse.
Lärmwirkungen: Gehör, Gesundheitliche Wirkungen von Lärm, Störung/Belästigung, Belastungsmasse.
Gesetzliche Grundlagen der Lärmbekämpfung / Raumplanung: Lärmschutzverordnung/SIA 181. Zusammenhang mit der Raumplanung.
Schallausbreitung im Freien: Abstandsgesetze, Luftdämpfung, Bodeneffekt, Abschirmung, Reflexion, Streuung, Bebauung, Wettereinflüsse.
Kurze Einführung in die Bauakustik und in die einfachsten Grundlagen der Raumakustik.
Eigenschaften von Schallquellen: Akustische Beschreibung von Schallquellen, Lärmminderung an der Quelle.
Lärmarten und Prognoseverfahren: Messen/Berechnen, Strassenlärm, Eisenbahnlärm, Fluglärm, Schiesslärm, Industrielärm.
Lecture notesSkript "Lärmbekämpfung" erhältlich zu Beginn der Vorlesung.

Bestellung auch hier möglich: Sekretariat der Abteilung Akustik, EMPA Dübendorf. Link. +41 58 765 4692. Link
Prerequisites / Notice1 - 2 Exkursionen
Elective Block: Soil Protection
NumberTitleTypeECTSHoursLecturers
701-0501-00LPedosphereW3 credits2VR. Kretzschmar
AbstractIntroduction to the formation and properties of soils as a function of parent rock, landscape position, climate, and soil organisms. Complex relationships between soil forming processes, physical and chemical soil properties, soil biota, and ecological soil properties are explained and illustrated by numerous examples.
ObjectiveIntroduction to the formation and properties of soils as a function of parent rock, landscape position, climate, and soil organisms. Complex relationships between soil forming processes, physical and chemical soil properties, soil biota, and ecological soil properties are explained and illustrated by numerous examples.
ContentDefinition of the pedosphere, soil functions, rocks as parent materials, minerals and weathering, soil organisms, soil organic matter, physical soil properties and functions, chemical soil properties and functions, soil formation, principles of soil classification, global soil regions, soil fertility, land use and soil degradation.
Lecture notesLecture notes can be purchased during the first lecture (15.- SFr)
Literature- Scheffer/Schachtschabel - Soil Science, Springer, Heidelberg, 2016.

- Brady N.C. and Weil, R.R. The Nature and Properties of Soils. 14th ed. Prentice Hall, 2007.
Prerequisites / NoticePrerequisites: Basic knowledge in chemistry, biology and geology.
701-0533-00LSoil ChemistryW3 credits2GR. Kretzschmar, D. I. Christl
AbstractThis course discusses chemical and biogeochemical processes in soils and their influence on the behavior and cycling of nutrients and pollutants in terrestrial systems. Approaches for quantitative modeling of the processes are introduced.
ObjectiveUnderstanding of important chemical soil properties and processes and their influence on the behavior (e.g., speciation, bioavailability, mobility) of nutrients and pollutants.
ContentImportant topics include the structure and properties of clays and oxides, the chemistry of the soil solution, gas equilibria, dissolution and precipitation of mineral phases, cation exchange, surface complexation, chemistry of soil organic matter, redox reactions in flooded soils, soil acidification and soil salinization.
Lecture notesHandouts in lectures.
Literature- Selected chapters in: Encyclopedia of Soils in the Environment, 2005.
- Chapters 2 and 5 in Scheffer/Schachtschabel - Soil Science, 1st English edition, Springer, 2016.
Elective Block: Civil Engineering
NumberTitleTypeECTSHoursLecturers
101-0339-00LEnvironmental GeotechnicsW3 credits2GM. Plötze
AbstractIntroduction of basic knowledge about problems with contaminated sites, investigation of this sites, risque management, remediation and reclamation techniques as well as monitoring systems.
Introduction in landfill design and engineering with focus on barrier- and drainage systems and lining materials, evaluation of geotechnical problems, e.g. stability
ObjectiveIntroduction of basic knowledge about problems with contaminated sites, investigation of this sites, risque management, remediation and reclamation techniques as well as monitoring systems.
Introduction in landfill design and engineering with focus on barrier- and drainage systems as wellas lining materials, evaluation of geotechnical problems, e.g. stability
ContentDefinition of contaminated sites, site investigation methods, historical research and technical investigation, risque assessment, contamination transport, remediation, clean-up and retaining techniques (e.g. bioremediation, incineration, retaining walls, pump-and-treat, permeable reactive barriers), monitoring, research projects and results

waste, waste disposal, treatment and management, multi-barrier-systems, site investigation, lining systems and recovering systems of landfill (e.g. materials, drainage systems, geosynthetics), stability, research projects and results
Lecture notesDr. R. Hermanns Stengele, Dr. M. Plötze: Environmental Geotechnics (german) digital
Prerequisites / Noticeexcursion
101-0113-10LTheory of Structures (for Environmental Engineering) Information Restricted registration - show details
Only for Environmental Engineering BSc.
W3 credits2.5GB. Sudret
AbstractIntroduction to structural mechanics, statically determinate beams and frame structures, trusses. Stresses in statically determinate structures.
Objective- Understanding the response of elastic beam and frame structures
- Ability to correctly apply the equilibrium conditions
- Understanding the basics of continuum mechanics
- Computation of stresses in elastic structures
Content- Equilibrium, reactions, static determinacy
- Internal forces (normal and shear forces, moments)
- Arches and cables
- Elastic trusses
- Influence lines
- Basics of continuum mechanics
- Stresses in elastic beams
Lecture notesBruno Sudret, "Einführung in die Baustatik" (2018)

Additional course material will be available on the web page:
Link
LiteraturePeter Marti, "Theory of Structures", Wiley, 2013, 679 pp.
Elective Block: Energy
Offer in FS (as from FS19 on):
-529-0191-01 Renewable Energy Technologies II
-227-0803-00 Energy, Resources, Environment: Risks and Prospects
At least 10KP must be achieved for the elective block: Energy.
NumberTitleTypeECTSHoursLecturers
227-1635-00LElectric Circuits
Students without a background in Electrical Engineering must take "Electric Circuits" before taking "Introduction to Electric Power Transmission: System & Technology"
W4 credits3GM. Zima, D. Shchetinin
AbstractIntroduction to analysis methods and network theorems to describe operation of electric circuits. Theoretical foundations are essential for the analysis of the electric power transmission and distribution grids as well as many modern technological devices – consumer electronics, control systems, computers and communications.
ObjectiveAt the end of this course, the student will be able to: understand variables in electric circuits, evaluate possible approaches and analyse simple electric circuits with RLC elements, apply circuit theorems to simple meshed circuits, analyze AC circuits in a steady state and understand the connection of the explained principles to the modelling of the 3-phase electric power systems.
ContentCourse will introduce electric circuits variables, circuit elements (resistive, inductive, capacitive), resistive circuits and theorems (Kirchhoffs’ laws, Norton and Thevenin equivalents), nodal and mesh analysis, superposition principle; it will continue by discussing the complete response circuits (RLC), sinusoidal analysis – ac steady state (complex power, reactive, active power) and conclude with the introduction to 3-phase analysis;
Mathematical foundations of the circuit analysis, such as matrix operations and complex numbers will be briefly reviewed.
This course is targeting students who have no prior background in electrical engineering.
Lecture noteslecture and exercises slides will be distributed after each lecture via moodle platform; additional materials to be accessed online (wileyplus)
LiteratureRichard C. Dorf, James A. Svoboda
Introduction to Electric Circuits, 9th Edition
Online materials: Link
Lecture slides and exercises slides
Prerequisites / NoticeThis course is intended for students outside of D-ITET. No prior course in electrical engineering is required
151-1633-00LEnergy Conversion
This course is intended for students outside of D-MAVT.
W4 credits3GI. Karlin, G. Sansavini
AbstractThis course provides the students with an introduction to thermodynamics and heat transfer. Students shall gain basic understanding of energy, energy interactions, and various mechanisms of heat transfer as well as their link to energy conversion technologies.
ObjectiveThermodynamics is key to understanding and use of energy conversion processes in Nature and technology. Main objective of this course is to give a compact introduction into basics of Thermodynamics: Thermodynamic states and thermodynamic processes; Work and Heat; First and Second Laws of Thermodynamics. Students shall learn how to use energy balance equation in the analysis of power cycles and shall be able to evaluate efficiency of internal combustion engines, gas turbines and steam power plants. The course shall extensively use thermodynamic charts to building up students’ intuition about opportunities and restrictions to increase useful work output of energy conversion. Thermodynamic functions such as entropy, enthalpy and free enthalpy shall be used to understand chemical and phase equilibrium. The course also gives introduction to refrigeration cycles, combustion and psychrometry, as well as to basic principles of heat transfer. The course compactly covers the standard course of thermodynamics for engineers, with additional topics of a general physics interest (nonideal gas equation of state and Joule-Thomson effect) also included.
Content1. Thermodynamic systems, states and state variables
2. Properties of substances: Water, air and ideal gas
3. Energy conservation in closed and open systems: work, internal energy, heat and enthalpy
4. Second law of thermodynamics and entropy
5. Energy analysis of steam power cycles
6. Energy analysis of gas power cycles
7. Refrigeration and heat pump cycles
8. Nonideal gas equation of state and Joule-Thomson effect
9. Maximal work and exergy
10. Mixtures and psychrometry
11. Chemical reactions and combustion systems; chemical and phase equilibrium
12. Heat transfer
Lecture notesLecture slides and supplementary documentation will be available online.
LiteratureThermodynamics: An Engineering Approach, by Cengel, Y. A. and Boles, M. A., McGraw Hill
Prerequisites / NoticeThis course is intended for students outside of D-MAVT.

Students are assumed to have an adequate background in calculus, physics, and engineering mechanics.
  •  Page  1  of  1