227-0146-00L  Analog-to-Digital Converters

SemesterHerbstsemester 2020
Dozierende
Periodizitätjährlich wiederkehrende Veranstaltung
LehrveranstaltungFindet dieses Semester nicht statt.
LehrspracheEnglisch
KommentarCourse will be moved to the autumn semester 2021.



Lehrveranstaltungen

NummerTitelUmfangDozierende
227-0146-00 VAnalog-to-Digital Converters
Findet dieses Semester nicht statt.
2 Std.
227-0146-00 UAnalog-to-Digital Converters
Findet dieses Semester nicht statt.
2 Std.

Katalogdaten

KurzbeschreibungThis course provides a thorough treatment of integrated data conversion systems from system level specifications and trade-offs, over architecture choice down to circuit implementation.
LernzielData conversion systems are substantial sub-parts of many electronic systems, e.g. the audio conversion system of a home-cinema systems or the base-band front-end of a wireless modem. Data conversion systems usually determine the performance of the overall system in terms of dynamic range and linearity. The student will learn to understand the basic principles behind data conversion and be introduced to the different methods and circuit architectures to implement such a conversion. The conversion methods such as successive approximation or algorithmic conversion are explained with their principle of operation accompanied with the appropriate mathematical calculations, including the effects of non-idealties in some cases. After successful completion of the course the student should understand the concept of an ideal ADC, know all major converter architectures, their principle of operation and what governs their performance.
Inhalt- Introduction: information representation and communication; abstraction, categorization and symbolic representation; basic conversion algorithms; data converter application; tradeoffs among key parameters; ADC taxonomy.
- Dual-slope & successive approximation register (SAR) converters: dual slope principle & converter; SAR ADC operating principle; SAR implementation with a capacitive array; range extension with segmented array.
- Algorithmic & pipelined A/D converters: algorithmic conversion principle; sample & hold stage; pipe-lined converter; multiplying DAC; flash sub-ADC and n-bit MDAC; redundancy for correction of non-idealties, error correction.
- Performance metrics and non-linearity: ideal ADC; offset, gain error, differential and integral non-linearities; capacitor mismatch; impact of capacitor mismatch on SAR ADC's performance.
- Flash, folding an interpolating analog-to-digital converters: flash ADC principle, thermometer to binary coding, sparkle correction; limitations of flash converters; the folding principle, residue extraction; folding amplifiers; cascaded folding; interpolation for folding converters; cascaded folding and interpolation.
- Noise in analog-to-digital converters: types of noise; noise calculation in electronic circuit, kT/C-noise, sampled noise; noise analysis in switched-capacitor circuits; aperture time uncertainty and sampling jitter.
- Delta-sigma A/D-converters: linearity and resolution; from delta-modulation to delta-sigma modulation; first-oder delta-sigma modulation, circuit level implementation; clock-jitter & SNR in delta-sigma modulators; second-order delta-sigma modulation, higher-order modulation, design procedure for a single-loop modulator.
- Digital-to-analog converters: introduction; current scaling D/A converter, current steering DAC, calibration for improved performance.
SkriptSlides are available online under Link
Literatur- B. Razavi, Principles of Data Conversion System Design, IEEE Press, 1994
- M. Gustavsson et. al., CMOS Data Converters for Communications, Springer, 2010
- R.J. van de Plassche, CMOS Integrated Analog-to-Digital and Digital-to-Analog Converters, Springer, 2010
Voraussetzungen / BesonderesIt is highly recommended to attend the course "Analog Integrated Circuits" of Prof. Huang as a preparation for this course.

Leistungskontrolle

Information zur Leistungskontrolle (gültig bis die Lerneinheit neu gelesen wird)
Leistungskontrolle als Semesterkurs
ECTS Kreditpunkte6 KP
PrüfendeT. Burger
FormSessionsprüfung
PrüfungsspracheEnglisch
RepetitionDie Leistungskontrolle wird in jeder Session angeboten. Die Repetition ist ohne erneute Belegung der Lerneinheit möglich.
Prüfungsmodusmündlich 30 Minuten
Diese Angaben können noch zu Semesterbeginn aktualisiert werden; verbindlich sind die Angaben auf dem Prüfungsplan.

Lernmaterialien

 
HauptlinkInformation
Es werden nur die öffentlichen Lernmaterialien aufgeführt.

Gruppen

Keine Informationen zu Gruppen vorhanden.

Einschränkungen

Keine zusätzlichen Belegungseinschränkungen vorhanden.

Angeboten in

StudiengangBereichTyp
Doktorat Departement Informationstechnologie und ElektrotechnikLehrangebot Doktorat und PostdoktoratWInformation
Elektrotechnik und Informationstechnologie MasterKernfächerWInformation
Elektrotechnik und Informationstechnologie MasterAdvanced Core CoursesWInformation
Quantum Engineering MasterWahlfächerWInformation