Konrad Wegener: Catalogue data in Spring Semester 2023

Award: The Golden Owl
Name Prof. em. Dr. Konrad Wegener
FieldProduktionstechnik und Werkzeugmaschinen
Address
Inst. f. Werkzeugmaschinen
ETH Zürich, PFA EO 94
Technoparkstrasse 1
8005 Zürich
SWITZERLAND
Telephone+41 44 632 24 19
E-mailwegener@iwf.mavt.ethz.ch
DepartmentMechanical and Process Engineering
RelationshipProfessor emeritus

NumberTitleECTSHoursLecturers
151-0075-11Le‐Sling Hydrogen Powertrain Restricted registration - show details
Prerequisite: Enrollment for 151-0075-10L e‐Sling Hydrogen Powertrain in HS22.
14 credits15AK. Wegener
AbstractStudents develop and build a product from A-Z! They work in teams and independently, learn to structure problems, to identify solutions, system analysis and simulations, as well as presentation and documentation techniques. They build the product with access to a machine shop and state of the art engineering tools (Matlab, Simulink, etc).
ObjectiveThe various objectives of the Focus Project are:
- Synthesizing and deepening the theoretical knowledge from the basic courses of the 1. - 4. semester
- Team organization, work in teams, increase of interpersonal skills
- Independence, initiative, independent learning of new topic contents
- Problem structuring, solution identification in indistinct problem definitions, searches of information
- System description and simulation
- Presentation methods, writing of a document
- Ability to make decisions, implementation skills
- Workshop and industrial contacts
- Learning and recess of special knowledge
- Control of most modern engineering tools (Matlab, Simulink, CAD, CAE, PDM)
151-0076-21LH2Go Restricted registration - show details
Prerequisite: Enrollment for 151-0073-20L H2Go in HS22.
14 credits15AK. Wegener
AbstractStudents develop and build a product from A-Z! They work in teams and independently, learn to structure problems, to identify solutions, system analysis and simulations, as well as presentation and documentation techniques. They build the product with access to a machine shop and state of the art engineering tools (Matlab, Simulink, etc).
ObjectiveThe various objectives of the Focus Project are:
- Synthesizing and deepening the theoretical knowledge from the basic courses of the 1. - 4. semester
- Team organization, work in teams, increase of interpersonal skills
- Independence, initiative, independent learning of new topic contents
- Problem structuring, solution identification in indistinct problem definitions, searches of information
- System description and simulation
- Presentation methods, writing of a document
- Ability to make decisions, implementation skills
- Workshop and industrial contacts
- Learning and recess of special knowledge
- Control of most modern engineering tools (Matlab, Simulink, CAD, CAE, PDM)
151-0304-00LEngineering Design II4 credits4GK. Wegener
AbstractDimensioning (strength calculation) of machine parts,
shaft - hub - connections, welded and brazed joints, springs, screws, roller and slide bearings, transmissions, gears, clutch and brake as well as their practical applications.
ObjectiveThe students extend in that course their knowledge on the correct application of machine parts and machine elements including dimensioning. Focus is laid on the acquisition of competency to solve technical problems and judge technical solutions and to correctly apply their knowledge according to operation conditions, functionality and strength calculations.
ContentMachine parts as shaft - hub - connections, welded and brazed joints, springs, screws, roller and slide bearings, transmissions, gears, clutch and brake are discussed. The course covers for all the machine elements their functionality, their application and limits of applicability and the dimensioning is as well as their practical applications. Exercises show the solution of practical problems. Partly practical problems are solved by the students for their own.
Lecture notesScript exists. Price: SFr. 40.-
Prerequisites / NoticePrerequisites:
Basics in design and product development
Dimensioning 1

Credit-conditions / examination:
Partly practical problems are solved by the students for their own. The examination will be in the following examination session. Credits are given after passing the examination.
151-0700-00LManufacturing4 credits2V + 2UK. Wegener
AbstractFundamental terms of productions engineering, plastic deformation, machining, Lasermachining, Mechatronic in the productions machine construction, Quality assurance, Process chain planning.
Objective- Knowledge of principal terms of manufacturing engineering
- Basic knowledge of some processes, their mode of operation and
design (forming, separative processes, Laser technics)
- Knowledge of product defining properties and limitations of applications
- In competition of processes make the right decisions
- Procedure for process chain planning
- Basic knowledge for quality assurance
ContentExplanation of basic principles of manufacturing technics and insight into the functionality of a manufacturing shop. Plastic deformation- and separative- manufacturing processes, as well as laser machining (welding and cutting), and their layouts, product defining properties and limitations of applications such as the associated workshop facilities, will be introduced in different details. Further basic principles of the industrial measurement technique and mechatronics concepts in machine tool construction will be discussed.
Lecture notesYes
LiteratureHerbert Fritz, Günter Schulze (Hrsg.) Fertigungstechnik. 6. Aufl. Springer Verlag 2003
Prerequisites / NoticeAn excursion to one or two manufacturing engineering plant is planned.
151-0708-00LManufacturing II4 credits2V + 1UK. Wegener, M. Schmid, S. Weikert
AbstractExemplary discussion on modern manufacturing methods to add and delete material as well as modern measuring methods. Introduction to general environmental problems of production up to the product disposal.
ObjectiveDeepen the specialized knowledge of most modern mechanical manufacturing methods. Learn to consider aspects of environment and resources at careful manufacturing.
ContentModern manufacturing methods like rapidly prototyping and rapid Tooling, high-speed cutting and processing of hard materials, machininig with laser beams and waterjet, high performance casting technology. CAD - CAM coupling, strategies of the process selection. Devices, principle considerations for relationship between production and environment. Waste disposal engineering, disposal-fair designing.
Lecture notesYes
Prerequisites / NoticeAttendance of the lecture Manufacturing (151-0700-00L) recommended

Combination with production machines I and II recommended
151-0720-00LProduction Machines I4 credits4GK. Wegener, S. Weikert
AbstractFirst part of the lecture on production machines. Introduction to the special features of production machines on the basis of metal cutting and forming machine tools. Dimensioning and design, as well as specific functional components.
ObjectiveElaboration of the special requirements on the machine tools, such as precision, dynamics, long-life and their realisation. Development and respectively assortment of the most important components.
ContentBasics of the machine tool design, Six-point principal is shown. Components of machine tools (foundations, frames, bearings, guides, measuring systems, drives and their control) and their types of machine designs. Terminology, classification and quality characteristics. Special components and selected types of forming machines and there design and dimensioning. Insight into safety of machinery and automation.
Lecture notesyes
151-0802-00LAutomation Technology4 credits2V + 1UH. Wild, K. Wegener
AbstractThe automation of production lines will be dealt as interdisciplinary topic. The course contains:
- elementary elements of automatized systems
- Chain of action: sensors, signalisation, control and closed loop control, power electronics, actors
- Conception, description, computation, layout, design and simulation
- Availability and reliability
- Modern concepts
ObjectiveThe students shall acquire knowledge for projection and realization of highly automatized production systems. They will be trained to understand, overview and supervise the whole value chain from the definition of task the specification tender, conception and projection, the detailed design and startup. They shall know and be able to evaluate the solution possibilities, and the concepts in research and development.
ContentHighly developed industrialized nations are necessarily bound to automatization of manufacturing processes for their competitiveness. Conception, realization, startup and run in of automatized production lines, "to make them alive", is one of the most exciting businesses in engineering. For the layout of automatized systems mechatronic design is of greatest importance to achieve optimal and overall supreme solutions. The course focuses on the interdisciplinary solution space, spanned by mechanical engineering, process technology, electronics and electrical engineering, information technology and more and more optics. subsystems , the information and optical subsystems. The complete processing chain, from sensing to action, sensors, signalization, control and closed loop control, power electronics and actors is discussed.

Basic elements, sensors and actors, transmitting from mechanics to electronics and vice versa, as well as control systems and interfaces and bus systems are presented. In production technology these are applied in the different automation devices and then condensed to full production lines.

Different concepts for automation, layout planning, description and simulation and the interface to and safety of humans are topics. The economic boundary conditions are taken into account and lead to concepts for availability and reliability of complex systems and to the discussion of today's research concepts for fault tolerancing systems, to autodiagnosis and self repair, cognitive systems and agent systems.
In theoretical and experimental exercises the students can gain experience, that qualify them for the conception, computation and startup of automatized systems.
Lecture notesManuscripts are distributed per chapter