Maschineningenieurwissenschaften Master  |
 Kernfächer |
| Energy, Flows and Processes |
| Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
|---|
| 151-0104-00L | Uncertainty Quantification for Engineering & Life Sciences  Findet dieses Semester nicht statt.
Number of participants limited to 60. | W | 4 KP | 3G | P. Koumoutsakos |
| 151-0105-00L | Quantitative Flow Visualization | W | 4 KP | 2V + 1U | T. Rösgen |
| 151-0107-20L | High Performance Computing for Science and Engineering (HPCSE) I | W | 4 KP | 4G | M. Troyer,
P. Chatzidoukas |
| 151-0109-00L | Turbulent Flows | W | 4 KP | 2V + 1U | P. Jenny |
| 151-0113-00L | Applied Fluid Dynamics | W | 4 KP | 2V + 1U | J.‑P. Kunsch |
| 151-0163-00L | Nuclear Energy Conversion | W | 4 KP | 2V + 1U | H.‑M. Prasser |
| 151-0182-00L | Fundamentals of CFD Methods | W | 4 KP | 3G | A. Haselbacher |
| 151-0185-00L | Radiation Heat Transfer | W | 4 KP | 2V + 1U | A. Steinfeld,
A. Z'Graggen |
| 151-0203-00L | Turbomachinery Design Maximale Teilnehmerzahl: 20 | W | 4 KP | 2V + 1U | R. S. Abhari,
N. Chokani,
B. Ribi |
| 151-0207-00L | Theory and Modeling of Reactive Flows | W | 4 KP | 3G | C. E. Frouzakis,
I. Mantzaras |
| 151-0213-00L | Fluid Dynamics with the Lattice Boltzmann Method | W | 4 KP | 3G | I. Karlin |
| 151-0216-00L | Wind Energy | W | 4 KP | 2V + 1U | N. Chokani |
| 151-0235-00L | Thermodynamics of Novel Energy Conversion Technologies | W | 4 KP | 3G | C. S. Sharma,
D. Poulikakos,
G. Sansavini |
| 151-0243-00L | New Enterprises for Engineers Findet dieses Semester nicht statt. | W | 4 KP | 3G | R. S. Abhari |
| 151-0251-00L | IC-Engines and Propulsion Systems I Maximale Teilnehmerzahl: 60 | W | 4 KP | 2V + 1U | K. Boulouchos,
G. Georges,
P. Kyrtatos |
| 151-0368-00L | Aeroelastik | W | 4 KP | 2V + 1U | F. Campanile |
| 151-0709-00L | Stochastic Methods for Engineers and Natural Scientists | W | 4 KP | 3G | D. W. Meyer-Massetti,
N. Noiray |
| 151-0851-00L | Robot Dynamics | W | 4 KP | 2V + 1U | M. Hutter,
R. Siegwart,
T. Stastny |
| 151-0911-00L | Introduction to Plasmonics | W | 4 KP | 2V + 1U | D. J. Norris |
| 151-0917-00L | Mass Transfer | W | 4 KP | 2V + 2U | R. Büchel,
S. E. Pratsinis |
| 151-0927-00L | Rate-Controlled Separations in Fine Chemistry | W | 4 KP | 3G | M. Mazzotti |
| 151-0933-00L | Seminar on Advanced Separation Processes | Z | 0 KP | 1S | M. Mazzotti |
| 151-0951-00L | Process Design and Safety | W | 4 KP | 2V + 1U | P. Rudolf von Rohr |
| 151-1116-00L | Einführung in Flug- und Fahrzeugaerodynamik | W | 4 KP | 3G | J. Wildi |
| 101-0187-00L | Structural Reliability and Risk Analysis | W | 3 KP | 2G | B. Sudret |
| 101-0499-00L | Grundlagen der Luftfahrt | W | 4 KP | 3G | P. Wild |
| 227-0455-00L | Terahertz: Technology & Applications | W | 3 KP | 2V | K. Sankaran |
| 227-0950-00L | Akustik | Z | 0 KP | 0.5K | K. Heutschi |
| 529-0193-00L | Renewable Energy Technologies I Die Lerneinheiten Renewable Energy Technologies I (529-0193-00L, im HS) und Renewable Energy Technologies II (529-0191-01L, im FS) können unabhängig voneinander besucht werden. | W | 4 KP | 3G | A. Wokaun,
A. Steinfeld |
| 636-0001-00L | Separations in Biotechnology and Bioprocess Economy | W | 6 KP | 3G | S. Panke |
| 636-0507-00L | Synthetic Biology II | W | 4 KP | 4A | S. Panke,
Y. Benenson,
J. Stelling |
|
| Mechanics, Materials, Structures |
| Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
|---|
| 151-0104-00L | Uncertainty Quantification for Engineering & Life Sciences Findet dieses Semester nicht statt.
Number of participants limited to 60. | W | 4 KP | 3G | P. Koumoutsakos |
| 151-0107-20L | High Performance Computing for Science and Engineering (HPCSE) I | W | 4 KP | 4G | M. Troyer,
P. Chatzidoukas |
| 151-0317-00L | Visualization, Simulation and Interaction - Virtual Reality II | W | 4 KP | 3G | A. Kunz |
| 151-0349-00L | Betriebsfestigkeit | W | 4 KP | 3G | M. Guillaume,
R. E. Koller |
| 151-0353-00L | Mechanics of Composite Materials | W | 4 KP | 2V + 1U | G. Kress |
| 151-0357-00L | Seilbahnen | W | 4 KP | 3G | G. Kovacs |
| 151-0360-00L | Methoden der Strukturanalyse | W | 4 KP | 2V + 1U | G. Kress |
| 151-0368-00L | Aeroelastik | W | 4 KP | 2V + 1U | F. Campanile |
| 151-0509-00L | Microscale Acoustofluidics Number of participants limited to 30. | W | 4 KP | 3G | J. Dual |
| 151-0513-00L | Mechanics of Soft Materials and Tissues | W | 4 KP | 3G | A. E. Ehret |
| 151-0517-00L | Scientific Visualization for Engineering Applications | W | 4 KP | 2V + 2P | X. Tricoche |
| 151-0523-00L | Dynamik der Schienenfahrzeuge | W | 4 KP | 2V + 1U | O. Polach |
| 151-0524-00L | Continuum Mechanics I | W | 4 KP | 2V + 1U | E. Mazza |
| 151-0525-00L | Wave Propagation in Solids | W | 4 KP | 2V + 1U | J. Dual,
D. Mohr |
| 151-0532-00L | Nonlinear Dynamics and Chaos I | W | 4 KP | 2V + 2U | G. Haller,
F. Kogelbauer |
| 151-0535-00L | Optical Methods in Experimental Mechanics | W | 4 KP | 3G | E. Hack,
R. Brönnimann |
| 151-0550-00L | Adaptive Materials for Structural Applications | W | 4 KP | 3G | A. Bergamini |
| 151-0573-00L | Systemmodellierung | W | 4 KP | 2V + 2U | G. Ducard,
C. Onder |
| 151-0655-00L | Skills for Creativity and Innovation | W | 4 KP | 3G | I. Goller,
C. Kobe,
M. Meboldt |
| 151-0703-00L | Betriebliche Simulation von Produktionsanlagen | W | 4 KP | 2V + 1U | P. Acél |
| 151-0705-00L | Fertigungstechnik I | W | 4 KP | 2V + 2U | K. Wegener,
M. Boccadoro,
F. Kuster |
| 151-0717-00L | Mechanische Produktion: Montieren, Fügen, Beschichten | W | 4 KP | 2V + 1U | F. Kuster,
V. H. Derflinger,
F. Durand,
P. Jousset |
| 151-0719-00L | Qualität von Werkzeugmaschinen - Dynamik, Mikro- und Submikromesstechnik | W | 4 KP | 2V + 1U | W. Knapp,
F. Kuster |
| 151-0721-00L | Production Machines II | W | 4 KP | 2V + 1U | K. Wegener,
F. Kuster,
S. Weikert |
| 151-0723-00L | Produktion von elektrischen und elektronischen Komponenten | W | 4 KP | 3G | A. Kunz,
A. Guber,
R.‑D. Moryson,
F. Reichert |
| 151-0727-00L | Fertigungstechnisches Kolloquium | W | 4 KP | 3K | K. Wegener,
F. Kuster |
| 151-0731-00L | Umformtechnik I - Grundlagen | W | 4 KP | 2V + 2U | P. Hora |
| 151-0733-00L | Umformtechnik III - Umformtechnische Verfahren | W | 4 KP | 2V + 2U | P. Hora |
| 151-0735-00L | Dynamic Behavior of Materials and Structures Findet dieses Semester nicht statt. | W | 4 KP | 2V + 2U | D. Mohr |
| 151-0765-00L | Leading and Coaching Focus Project Teams (Basic Course) This course is the first part of a two-semester course.
The course "Leading and Coaching Focus Project Teams (Basic Course)" for Autumn Semester is examined together with the course "Leading and Coaching Focus Project Teams (Advanced Course)" for Spring Semester with 4 ECTS. | W | 0 KP | 2G + 0.5A | R. P. Haas,
I. Goller |
| 151-0833-00L | Principles of Nonlinear Finite-Element-Methods | W | 5 KP | 2V + 2U | N. Manopulo,
B. Berisha,
P. Hora |
| 151-0917-00L | Mass Transfer | W | 4 KP | 2V + 2U | R. Büchel,
S. E. Pratsinis |
| 151-3203-00L | Grand Challenges in Engineering Design | W | 1 KP | 3S | P. Ermanni,
M. Meboldt,
K. Shea |
| 227-0447-00L | Image Analysis and Computer Vision | W | 6 KP | 3V + 1U | L. Van Gool,
O. Göksel,
E. Konukoglu |
| 227-0523-00L | Eisenbahn-Systemtechnik I | W | 6 KP | 4G | M. Meyer |
| 252-0535-00L | Machine Learning | W | 8 KP | 3V + 2U + 2A | J. M. Buhmann |
| 252-0543-01L | Computer Graphics | W | 6 KP | 3V + 2U | M. Gross,
J. Novak |
| 327-0501-00L | Metalle I | W | 3 KP | 2V + 1U | R. Spolenak |
| 327-4101-00L | Durability of Engineering Materials | W | 2 KP | 2G | J. Wheeler |
| 351-0555-00L | Open- and User Innovation | W | 3 KP | 2G | S. Häfliger,
S. Spaeth |
| 363-0445-00L | Production and Operations Management | W | 3 KP | 2G | T. Netland,
P. Schönsleben |
| 363-0445-02L | Production and Operations Management (Additional Cases) | W | 1 KP | 2A | T. Netland,
P. Schönsleben |
| 363-0541-00L | Systems Dynamics and Complexity | W | 3 KP | 3G | F. Schweitzer,
G. Casiraghi,
V. Nanumyan |
| 363-0711-00L | Accounting for Managers | W | 3 KP | 2V | M. Passardi |
| 376-1177-00L | Human Factors I | W | 2 KP | 2V | M. Menozzi Jäckli,
R. Huang,
M. Siegrist |
| 376-1219-00L | Rehabilitation Engineering II: Rehabilitation of Sensory and Vegetative Functions | W | 3 KP | 2V | R. Riener,
R. Gassert,
L. Marchal Crespo |
| 401-0647-00L | Introduction to Mathematical Optimization | W | 5 KP | 2V + 1U | D. Adjiashvili |
| 402-0801-66L | Mechanical Metamaterials | W | 4 KP | 2V + 1U | S. Huber |
|
| Robotics, Systems and Control |
| Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
|---|
| 151-0104-00L | Uncertainty Quantification for Engineering & Life Sciences Findet dieses Semester nicht statt.
Number of participants limited to 60. | W | 4 KP | 3G | P. Koumoutsakos |
| 151-0107-20L | High Performance Computing for Science and Engineering (HPCSE) I | W | 4 KP | 4G | M. Troyer,
P. Chatzidoukas |
| 151-0532-00L | Nonlinear Dynamics and Chaos I | W | 4 KP | 2V + 2U | G. Haller,
F. Kogelbauer |
| 151-0563-01L | Dynamic Programming and Optimal Control | W | 4 KP | 2V + 1U | R. D'Andrea |
| 151-0567-00L | Engine Systems | W | 4 KP | 3G | C. Onder |
| 151-0569-00L | Vehicle Propulsion Systems | W | 4 KP | 3G | C. Onder,
P. Elbert |
| 151-0573-00L | Systemmodellierung | W | 4 KP | 2V + 2U | G. Ducard,
C. Onder |
| 151-0593-00L | Embedded Control Systems | W | 4 KP | 6G | J. S. Freudenberg,
M. Schmid Daners,
C. Onder |
| 151-0601-00L | Theory of Robotics and Mechatronics | W | 4 KP | 3G | P. Korba,
S. Stoeter,
B. Nelson |
| 151-0604-00L | Microrobotics Findet dieses Semester nicht statt. | W | 4 KP | 3G | B. Nelson |
| 151-0623-00L | ETH Zurich Distinguished Seminar in Robotics, Systems and Controls Students for other Master's programmes in Department Mechanical and Process Engineering cannot use the credit in the category Core Courses | W | 1 KP | 1S | B. Nelson,
J. Buchli,
M. Chli,
R. Gassert,
M. Hutter,
W. Karlen,
R. Riener,
R. Siegwart |
| 151-0632-00L | Vision Algorithms for Mobile Robotics Maximale Teilnehmerzahl: 50 | W | 4 KP | 2V + 2U | D. Scaramuzza |
| 151-0655-00L | Skills for Creativity and Innovation | W | 4 KP | 3G | I. Goller,
C. Kobe,
M. Meboldt |
| 151-0727-00L | Fertigungstechnisches Kolloquium | W | 4 KP | 3K | K. Wegener,
F. Kuster |
| 151-0851-00L | Robot Dynamics | W | 4 KP | 2V + 1U | M. Hutter,
R. Siegwart,
T. Stastny |
| 151-0917-00L | Mass Transfer | W | 4 KP | 2V + 2U | R. Büchel,
S. E. Pratsinis |
| 151-1116-00L | Einführung in Flug- und Fahrzeugaerodynamik | W | 4 KP | 3G | J. Wildi |
| 227-0225-00L | Linear System Theory | W | 6 KP | 5G | M. Kamgarpour |
| 227-0447-00L | Image Analysis and Computer Vision | W | 6 KP | 3V + 1U | L. Van Gool,
O. Göksel,
E. Konukoglu |
| 227-0517-00L | Electrical Drive Systems II | W | 6 KP | 4G | P. Steimer,
G. Scheuer,
C. A. Stulz |
| 227-0689-00L | System Identification | W | 4 KP | 2V + 1U | R. Smith |
| 227-0920-00L | Seminar in Systems and Control | Z | 0 KP | 1S | F. Dörfler,
R. D'Andrea,
J. Lygeros,
R. Smith |
| 252-3110-00L | Human Computer Interaction | W | 4 KP | 2V + 1U | O. Hilliges,
M. Norrie |
| 263-5210-00L | Probabilistic Artificial Intelligence | W | 4 KP | 2V + 1U | S. Tschiatschek |
| 263-5902-00L | Computer Vision | W | 6 KP | 3V + 1U + 1A | L. Van Gool,
V. Ferrari,
A. Geiger |
| 376-1219-00L | Rehabilitation Engineering II: Rehabilitation of Sensory and Vegetative Functions | W | 3 KP | 2V | R. Riener,
R. Gassert,
L. Marchal Crespo |
| 376-1279-00L | Virtual Reality in Medicine Findet dieses Semester nicht statt. | W | 3 KP | 2V | R. Riener |
| 376-1504-00L | Physical Human Robot Interaction (pHRI) Number of participants limited to 26. | W | 4 KP | 2V + 2U | R. Gassert,
O. Lambercy |
|
| Micro & Nanosystems |
| Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
|---|
| 151-0104-00L | Uncertainty Quantification for Engineering & Life Sciences Findet dieses Semester nicht statt.
Number of participants limited to 60. | W | 4 KP | 3G | P. Koumoutsakos |
| 151-0107-20L | High Performance Computing for Science and Engineering (HPCSE) I | W | 4 KP | 4G | M. Troyer,
P. Chatzidoukas |
| 151-0604-00L | Microrobotics Findet dieses Semester nicht statt. | W | 4 KP | 3G | B. Nelson |
| 151-0605-00L | Nanosystems | W | 4 KP | 4G | A. Stemmer,
J.‑N. Tisserant |
| 151-0620-00L | Embedded MEMS Lab | W | 5 KP | 3P | C. Hierold,
S. Blunier,
M. Haluska |
| 151-0642-00L | Seminar on Micro and Nanosystems | Z | 0 KP | 1S | C. Hierold |
| 151-0911-00L | Introduction to Plasmonics | W | 4 KP | 2V + 1U | D. J. Norris |
| 151-0917-00L | Mass Transfer | W | 4 KP | 2V + 2U | R. Büchel,
S. E. Pratsinis |
| 151-0931-00L | Seminar on Particle Technology | Z | 0 KP | 3S | S. E. Pratsinis |
| 227-0377-00L | Physics of Failure and Failure Analysis of Electronic Devices and Equipment | W | 3 KP | 2V | U. Sennhauser |
| 227-0455-00L | Terahertz: Technology & Applications | W | 3 KP | 2V | K. Sankaran |
|
| Bioengineering |
| Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
|---|
| 151-0104-00L | Uncertainty Quantification for Engineering & Life Sciences Findet dieses Semester nicht statt.
Number of participants limited to 60. | W | 4 KP | 3G | P. Koumoutsakos |
| 151-0107-20L | High Performance Computing for Science and Engineering (HPCSE) I | W | 4 KP | 4G | M. Troyer,
P. Chatzidoukas |
| 151-0255-00L | Energy Conversion and Transport in Biosystems | W | 4 KP | 2V + 1U | D. Poulikakos,
A. Ferrari |
| 151-0317-00L | Visualization, Simulation and Interaction - Virtual Reality II | W | 4 KP | 3G | A. Kunz |
| 151-0917-00L | Mass Transfer | W | 4 KP | 2V + 2U | R. Büchel,
S. E. Pratsinis |
| 151-3205-00L | Experimental Ergonomics Number of participants limited to 15. | W | 4 KP | 2V + 2A | J. Held |
| 227-0385-10L | Biomedical Imaging | W | 6 KP | 5G | S. Kozerke,
K. P. Prüssmann,
M. Rudin |
| 227-0386-00L | Biomedical Engineering | W | 4 KP | 3G | J. Vörös,
S. J. Ferguson,
S. Kozerke,
U. Moser,
M. Rudin,
M. P. Wolf,
M. Zenobi-Wong |
| 227-0393-10L | Bioelectronics and Biosensors New course. Not to be confounded with 227-0393-00L last offered in the Spring Semester 2015. | W | 6 KP | 2V + 2U | J. Vörös,
M. F. Yanik,
T. Zambelli |
| 227-0447-00L | Image Analysis and Computer Vision | W | 6 KP | 3V + 1U | L. Van Gool,
O. Göksel,
E. Konukoglu |
| 227-0455-00L | Terahertz: Technology & Applications | W | 3 KP | 2V | K. Sankaran |
| 227-0945-00L | Cell and Molecular Biology for Engineers I This course is part I of a two-semester course. | W | 3 KP | 3G | C. Frei |
| 227-0965-00L | Micro and Nano-Tomography of Biological Tissues | W | 4 KP | 3G | M. Stampanoni,
P. A. Kaestner |
| 227-0981-00L | Cross-Disciplinary Research and Development in Medicine and Engineering A maximum of 12 medical degree students and 12 (biomedical) engineering degree students can be admitted, their number should be equal. | W | 4 KP | 2V + 2A | V. Kurtcuoglu,
D. de Julien de Zelicourt,
M. Meboldt,
M. Schmid Daners,
O. Ullrich |
| 376-1177-00L | Human Factors I | W | 2 KP | 2V | M. Menozzi Jäckli,
R. Huang,
M. Siegrist |
| 376-1219-00L | Rehabilitation Engineering II: Rehabilitation of Sensory and Vegetative Functions | W | 3 KP | 2V | R. Riener,
R. Gassert,
L. Marchal Crespo |
| 376-1279-00L | Virtual Reality in Medicine Findet dieses Semester nicht statt. | W | 3 KP | 2V | R. Riener |
| 376-1504-00L | Physical Human Robot Interaction (pHRI) Number of participants limited to 26. | W | 4 KP | 2V + 2U | R. Gassert,
O. Lambercy |
| 376-1651-00L | Clinical and Movement Biomechanics | W | 4 KP | 3G | S. Lorenzetti,
R. List,
N. Singh |
| 376-1714-00L | Biocompatible Materials | W | 4 KP | 3G | K. Maniura,
J. Möller,
M. Zenobi-Wong |
| 376-1985-00L | Trauma Biomechanics | W | 4 KP | 2V + 1U | K.‑U. Schmitt,
M. H. Muser |
| 402-0341-00L | Medical Physics I | W | 6 KP | 2V + 1U | P. Manser |
| 551-0319-00L | Cellular Biochemistry (Part I) | W | 3 KP | 2V | U. Kutay,
R. I. Enchev,
B. Kornmann,
M. Peter,
I. Zemp,
weitere Dozierende |
|
| Design, Computation, Product Development & Manufacturing |
| Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
|---|
| 151-0104-00L | Uncertainty Quantification for Engineering & Life Sciences Findet dieses Semester nicht statt.
Number of participants limited to 60. | W | 4 KP | 3G | P. Koumoutsakos |
| 151-0735-00L | Dynamic Behavior of Materials and Structures Findet dieses Semester nicht statt. | W | 4 KP | 2V + 2U | D. Mohr |
| 151-3205-00L | Experimental Ergonomics Number of participants limited to 15. | W | 4 KP | 2V + 2A | J. Held |
| 151-3209-00L | Engineering Design Optimization Number of participants limited to 35. | W | 4 KP | 4G | K. Shea,
T. Stankovic |
| 363-1065-00L | Design Thinking: Human-Centred Solutions to Real World Challenges Due to didactic reasons, the number of participants is limited to 30. All interested students are invited to apply for this course by sending a one-page motivation letter until 14.9.16 to Florian Rittiner ( frittiner@ethz.ch). Additionally please enroll via mystudies. Places will be assigned after the first lecture on the basis of your motivation letter and commitment for the class. | W | 5 KP | 5G | A. Cabello Llamas,
F. Rittiner,
S. Brusoni,
C. Hölscher,
M. Meboldt |
|
Multidisziplinfächer
Den Studierenden steht das gesamte Lehrangebot der ETH Zürich, der ETH Lausanne sowie der Universitäten Zürich und St. Gallen zur individuellen Auswahl offen. |
| »
Gesamtes Lehrangebot der ETH Zürich |
|
| Studienarbeit |
| Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
|---|
| 151-1002-00L | Semester Project Mechanical Engineering Only for Mechanical Engineering MSc.
The subject of the Semester Project and the choice of the supervisor (ETH-professor) are to be approved in advance by the tutor. | O | 8 KP | 17A | Professor/innen |
|
| Industrie-Praxis |
| Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
|---|
| 151-1003-00L | Industrial Internship Mechanical Engineering | O | 8 KP | | externe Veranstalter |
|
| GESS Wissenschaft im Kontext |
| »
siehe Studiengang GESS Wissenschaft im Kontext: Typ A: Förderung allgemeiner Reflexionsfähigkeiten |
| »
siehe Studiengang GESS Wissenschaft im Kontext: Sprachkurse ETH/UZH |
| »
Empfehlungen aus dem Bereich GESS Wissenschaft im Kontext (Typ B) für das D-MAVT. |
|
| Master-Arbeit |
| Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
|---|
| 151-1001-00L | Master's Thesis Mechanical Engineering Students who fulfill the following criteria are allowed to begin with their Master's Thesis:
a. successful completion of the bachelor program;
b. fulfilling of any additional requirements necessary to gain admission to the master programme;
c. successful completion of the semester project and industrial internship;
d. achievement of 28 ECTS in the category "Core Courses".
The Master's Thesis must be approved in advance by the tutor and is supervised by a professor of ETH Zurich.
To choose a titular professor as a supervisor, please contact the D-MAVT Student Administration. | O | 30 KP | 64D | Professor/innen |
|
Auflagen-Lerneinheiten
Das untenstehende Lehrangebot gilt nur für MSc Studierende mit Zulassungsauflagen. |
| Nummer | Titel | Typ | ECTS | Umfang | Dozierende |
|---|
| 406-0173-AAL | Linear Algebra I and II Belegung ist NUR erlaubt für MSc Studierende, die diese Lerneinheit als Auflagenfach verfügt haben.
Alle andere Studierenden (u.a. auch Mobilitätsstudierende, Doktorierende) können diese Lerneinheit NICHT belegen. | E- | 6 KP | 13R | N. Hungerbühler |
| 406-0353-AAL | Analysis III Belegung ist NUR erlaubt für MSc Studierende, die diese Lerneinheit als Auflagenfach verfügt haben.
Alle andere Studierenden (u.a. auch Mobilitätsstudierende, Doktorierende) können diese Lerneinheit NICHT belegen. | E- | 4 KP | 9R | M. Soner |
